[R-sig-Geo] reading PostGIS table into sp data frame
Edward Vanden Berghe
evberghe at gmail.com
Fri Dec 21 15:48:04 CET 2012
Thanks Roger and also Edzer for your replies. Apologies for the choice of words below - I much appreciate your efforts, and those of the many others who are developing and maintaining Open Source software.
I'll look into installing GDAL and rgdal from source - not sure what chances of success I have, as I have absolutely no experience with this. Might be a good time to switch to Ubuntu for me!
Edward
-----Original Message-----
From: Roger Bivand [mailto:Roger.Bivand at nhh.no]
Sent: 21 December 2012 13:31
To: Edward Vanden Berghe
Cc: r-sig-geo at r-project.org
Subject: RE: [R-sig-Geo] reading PostGIS table into sp data frame
On Fri, 21 Dec 2012, Edward Vanden Berghe wrote:
> The GDAL was installed from www.gisinternals.com/sdk; I installed the
> 32 bits version, though my Windows version is 64: the table on
> gisinternals.com stated that there was a build problem with the
> 64-bits version.
>
> rgdal was installed from CRAN, as a binary, version 0.7-20, build
> 2.15.1. R version is 2.15.2 (2012-10-26) -- "Trick or Treat", platform
> x86_64-w64-mingw32/x64 (64-bit).
>
> The output from ogrDrivers() is pasted below.
>
> If I understand you correctly, and since I am using the standard CRAN
> Windows binary package, I might be out of luck?
Not out of luck, the users of the CRAN Windows and OSX rgdal binaries are very lucky indeed, thanks to hard work by Uwe Ligges, Brian Ripley and Simon Urbanek. At least many of the most commonly used drivers are present.
There never is a complete set of drivers ionstalled in any GDAL, some depend on proprietary dynamically linked objects.
file.show(system.file("README.windows", package="rgdal"))
displays the accumulated - but *not* updated - wisdom with regard to installing source rgdal on Windows, linked to an external GDAL DLL. If you try to follow this route, please pass back your experience with regard to installing - it is likely that much has changed. You may find that OSGeo4W is another source for a Win32 GDAL binary, but I don't see from the documentation whether it supports PostGIS.
Installing Linux, PostgreSQL, PostGIS, GDAL, Proj.4, etc., then R and rgdal under Linux will probably require less jumping through hoops than building rgdal against an external 64-bit GDAL under windows.
Hope this helps,
Roger
>
> Cheers,
>
> Edward
>
> Output from ogrDrivers():
>
> name write
> 1 AeronavFAA FALSE
> 2 ARCGEN FALSE
> 3 AVCBin FALSE
> 4 AVCE00 FALSE
> 5 BNA TRUE
> 6 CSV TRUE
> 7 DGN TRUE
> 8 DXF TRUE
> 9 EDIGEO FALSE
> 10 ESRI Shapefile TRUE
> 11 Geoconcept TRUE
> 12 GeoJSON TRUE
> 13 Geomedia FALSE
> 14 GeoRSS TRUE
> 15 GML TRUE
> 16 GMT TRUE
> 17 GPSBabel TRUE
> 18 GPSTrackMaker TRUE
> 19 GPX TRUE
> 20 HTF FALSE
> 21 Idrisi FALSE
> 22 KML TRUE
> 23 MapInfo File TRUE
> 24 Memory TRUE
> 25 MSSQLSpatial TRUE
> 26 ODBC TRUE
> 27 OpenAir FALSE
> 28 PCIDSK TRUE
> 29 PDS FALSE
> 30 PGDump TRUE
> 31 PGeo FALSE
> 32 REC FALSE
> 33 S57 TRUE
> 34 SDTS FALSE
> 35 SEGUKOOA FALSE
> 36 SEGY FALSE
> 37 SUA FALSE
> 38 SVG FALSE
> 39 TIGER TRUE
> 40 UK .NTF FALSE
> 41 VFK FALSE
> 42 VRT FALSE
> 43 XPlane FALSE
>
> -----Original Message-----
> From: Roger Bivand [mailto:Roger.Bivand at nhh.no]
> Sent: 20 December 2012 20:58
> To: Edward Vanden Berghe
> Cc: r-sig-geo at r-project.org
> Subject: Re: [R-sig-Geo] reading PostGIS table into sp data frame
>
> On Thu, 20 Dec 2012, Edward Vanden Berghe wrote:
>
>> Thanks!
>>
>> Unfortunately I have no luck trying to get readOGR to work directly
>> with the PostGIS database. I tried different variations:
>
> Did you check whether your rgdal/GDAL supports the PostGIS driver? Did you look at the output of ogrDrivers()? If you did not install rgdal as a source package built against a GDAL that has the PostGIS driver on your platform (maybe OSGeo4W??), but are using the standard CRAN Windows binary package, then it is simply the case that the driver is not supported. On OSX using the Kyngchaos frameworks, or on Linux, this would be simple, but it isn't simple on Windows. You need to establish how rgdal was installed and report that.
>
> Hope this clarifies,
>
> Roger
>
>>
>>> sp.object <- readOGR(dsn="PG:dbname=...
>>> sp.object <- readOGR(dsn="my_dsn" ... [where my_dsn is a Windows
>>> system dsn] sp.object <- readOGR(dsn="PG:my_dsn" ...
>>
>> all result in the same error message:
>>
>> Error in ogrInfo(dsn = dsn, layer = layer, input_field_name_encoding = input_field_name_encoding) :
>> Cannot open file
>>
>> Another variation,
>>
>>> sp.object <- readOGR(dsn="ODBC:my_dsn" ...
>>
>> Results in
>>
>> Error in ogrInfo(dsn = dsn, layer = layer, input_field_name_encoding = input_field_name_encoding) :
>> Multiple # dimensions:
>>
>> though all he geometries are 2d, and there is a constraint enforcing
>> this in the database.
>>
>> It seems rgdal is properly installed: I can use readOGR to read shape
>> files (and this, actually, resolves my problem, as I can use this as
>> a work-around); also, ogrDrivers() returns a list of 43 drivers (but
>> PG, PostgreSQL or PostGIS are not among these; ESRI Shapefile and ODBC are).
>>
>> I have no problems connecting to the PostgreSQL database using either
>> DBI/RPostgreSQL, or RODBC (the latter with the same Windows system
>> DSN that I used for the tests above). I am not familiar with GDAL,
>> don't know how to try and connect to the PostgreSQL database from
>> GDAL directly, rather than through rgdal.
>>
>> Again, any insight in what might go wrong would be most appreciated.
>>
>> Cheers,
>>
>> Edward
>>
>> Message: 4
>> Date: Wed, 19 Dec 2012 14:58:52 +0100
>> From: Raffaele Morelli <raffaele.morelli at gmail.com>
>> To: r-sig-geo at r-project.org
>> Subject: Re: [R-sig-Geo] reading PostGIS table into sp data frame
>> Message-ID:
>> <CAD4guxOt5fSUPbK4VbbPuZf-oTBrcY-UvNPcguvUYt4qS0+_kQ at mail.gmail.com>
>> Content-Type: text/plain
>>
>> 2012/12/19 Edward Vanden Berghe <evberghe at gmail.com>
>>
>>> I wanted to create a global map with squares in lat-lon. I have
>>> PostGIS tables to define these squares but I havent been able to
>>> figure out an efficient way of reading those tables into R. The code I am using now is:
>>>
>>> crs <- CRS("+proj=longlat +ellps=WGS84")
>>> s <- paste("select id, st_astext(geom) as geom from
>>> geo.cs10d";",
>>> sep="")
>>> r <- dbGetQuery(con, s)
>>> p <- readWKT(r$geom[1],id=r$id[1],p4s=crs)
>>> for(i in 2:length(r$id)){
>>> p <- rbind(p, readWKT(r$geom[i], id=r$id[i], p4s=crs))
>>> }
>>>
>>> where geo.cs10d is the table with squares, id the primary key of the
>>> table, and geom the binary geometry field.
>>>
>>> The code above works fine for the larger squares, such as 10
>>> degrees, of which I only need 648 to cover the globe. For finer
>>> resolutions, the above takes just too long I assume because the
>>> rbind function rewrites the whole sp object each time it executes.
>>> Ive seen other R scripts that initiate an empty data frame of the
>>> correct length to go round similar problems with the rbind function;
>>> I havent been able to find an equivalent for spatial polygons. How
>>> can I initiate an empty data frame with the right structure, and the right length?
>>>
>>> A preferable solution would be if there would be a single function
>>> to load a complete PostGIS table, rather than having to load the
>>> polygons one by one in a loop. Is there such a function?
>>>
>>> Im using PostgreSQL 8.4, PostGIS 1.5, R 2.15.2, platform
>>> x86_64-w64-mingw32; IDE is StatET 3.0.1 plugin for Eclipse 3.7.2.
>>>
>>> Any help would be much appreciated.
>>>
>>> Edward
>>>
>>
>> Use postgis st_transfom to convert your table in epsg:4326, I would
>> suggest to use a view for that.
>> Then use readOGR (in package rgdal) to read the table/view (geom and
>> attributes) in a sp object with :
>>
>> sp.object <- readOGR("PG:dbname=your_db host=your_host user=username
>> password=xxx", "geo.cs10d ")
>>
>> regards
>> -r
>>
>>
>>
>
> --
> Roger Bivand
> Department of Economics, NHH Norwegian School of Economics, Helleveien 30, N-5045 Bergen, Norway.
> voice: +47 55 95 93 55; fax +47 55 95 95 43
> e-mail: Roger.Bivand at nhh.no
>
>
--
Roger Bivand
Department of Economics, NHH Norwegian School of Economics, Helleveien 30, N-5045 Bergen, Norway.
voice: +47 55 95 93 55; fax +47 55 95 95 43
e-mail: Roger.Bivand at nhh.no
More information about the R-sig-Geo
mailing list