[R] need for help for solving operations in a vector

PIKAL Petr petr.pikal at precheza.cz
Tue Dec 29 08:32:17 CET 2015


Hi

You shall send your posts to the list, others can answer your questions and not only you can benefit from their answers too.

As you did not post any data it is hard to say what are your issues. I believe that there are several values which are the same not only near the peak but also at the bottom part. If your data look like I remember and you want to keep all values near the peak value regardless they are slightly growing or falling, one approach can be to identify peak value, and select all values near the peak (the threshold is up to you).

something like that

sss<-smooth.spline(temp$theta, temp$int, nknots=length(temp$int)/2)
peak <- which.max(predict(sss)$y)
baseline <- min(predict(sss)$y)
vyska <- predict(sss)$y[peak]
# 50% threshold
HM <- (vyska+baseline)/2
plot(temp$theta, temp$int, col=(temp$int>HM)+1, pch=19)
#10% threshold
HM<-vyska-(vyska*.1)
plot(temp$theta, temp$int, col=(temp$int>HM)+1, pch=19)

> dput(temp)
structure(list(theta = c(28.995, 29.005, 29.015, 29.025, 29.035,
29.045, 29.055, 29.065, 29.075, 29.085, 29.095, 29.105, 29.115,
29.125, 29.135, 29.145, 29.155, 29.165, 29.175, 29.185, 29.195,
29.205, 29.215, 29.225, 29.235, 29.245, 29.255, 29.265, 29.275,
29.285, 29.295, 29.305, 29.315, 29.325, 29.335, 29.345, 29.355,
29.365, 29.375, 29.385, 29.395, 29.405, 29.415, 29.425, 29.435,
29.445, 29.455, 29.465, 29.475, 29.485, 29.495, 29.505, 29.515,
29.525, 29.535, 29.545, 29.555, 29.565, 29.575, 29.585, 29.595,
29.605, 29.615, 29.625, 29.635, 29.645, 29.655, 29.665, 29.675,
29.685, 29.695, 29.705, 29.715, 29.725, 29.735, 29.745, 29.755,
29.765, 29.775, 29.785, 29.795, 29.805, 29.815, 29.825, 29.835,
29.845, 29.855, 29.865, 29.875, 29.885, 29.895, 29.905, 29.915,
29.925, 29.935, 29.945, 29.955, 29.965, 29.975, 29.985, 29.995
), int = c(329L, 330L, 318L, 287L, 315L, 344L, 333L, 324L, 334L,
366L, 339L, 374L, 375L, 335L, 415L, 371L, 413L, 382L, 408L, 406L,
407L, 440L, 475L, 465L, 516L, 510L, 490L, 550L, 663L, 647L, 628L,
721L, 789L, 814L, 890L, 923L, 1085L, 1102L, 1222L, 1356L, 1521L,
1729L, 1868L, 2120L, 2491L, 2656L, 3196L, 3599L, 4128L, 4536L,
5043L, 5310L, 5638L, 5792L, 5699L, 5374L, 4886L, 4473L, 4293L,
3757L, 3319L, 2934L, 2422L, 1998L, 1753L, 1397L, 1163L, 972L,
854L, 775L, 648L, 695L, 616L, 553L, 554L, 509L, 530L, 483L, 482L,
406L, 451L, 422L, 403L, 393L, 396L, 348L, 367L, 428L, 345L, 384L,
330L, 342L, 312L, 313L, 323L, 328L, 340L, 322L, 330L, 305L, 311L
)), .Names = c("theta", "int"), row.names = 100:200, class = "data.frame")
>

Cheers
Petr


From: Makram Belhaj Fraj [mailto:belhajfraj.makram at gmail.com]
Sent: Tuesday, December 29, 2015 5:54 AM
To: PIKAL Petr
Subject: Re: [R] need for help for solving operations in a vector

Hi Petr,
I would like to thank you for your time
i choose the following modification on the plotting so to keep only successive equals in red
plot(qWC1, col=(c(0, diff(qWC1))==0 )+1)
then, the red points I want to include in the irrigation period are the 3 successive red points in the plateau (equal values close to the max)
These points are very important as they are corresponding to saturation, we continue to irrigate with the same flow and values remains constant for a certain time, so I must add them to irrigation

up to now I didn't succeed in adding this plateau values to  theirrigations using the diff(qWC1, lag=1)
however, I wrote also some loops trying to catch all the irrigation and recharge separately and I still have some issues,
following are the loops I used, with comments corresponding to the issues
x<-qWC1
length(x)
irrig<-rep(1,61)
for (i in 2:61) {
if (x[i-1]<x[i]){
    irrig[i]<-x[i]-x[i-1]
}
}
rech<-rep(1,61)
for (i in 2:61) {
if (x[i-1]>x[i]){
    rech[i]<-x[i-1]-x[i]
}
}
plot(x, type = "l", col = "black", ylim = c(min(0), max(92)))
lines(irrig, type = "l", col = "cornflowerblue", ylim = c(min(0), max(15))) lines(rech, type = "l", col = "brown", ylim = c(min(0), max(15)))
temp<-irrig<1.000001 #logical command to identify low values into a temporary vector temp
temp2<-as.numeric(irrig>1.000001) #logical command to identify high values with 1
temp2
temp3<-as.numeric(rech>1.000001)
temp3
irrig2<-irrig*temp2  #remove values inf 1 mm inirrig
rech2<-rech*temp3    #same for rech
plot(irrig2, type = "l", col = "cornflowerblue", ylim = c(min(0), max(15))) lines(rech2, type = "l", col = "brown", ylim = c(min(0), max(15)))
Many thanks for your time and intellectual generosity
Cheers
Makram

On Mon, Dec 28, 2015 at 12:15 PM, PIKAL Petr <petr.pikal at precheza.cz<mailto:petr.pikal at precheza.cz>> wrote:
Hi

On top of answers you have got here is some plotting you need to answer yourself

plot(qWC1, col=(c(0, diff(qWC1))>=0 )+1)

Which from those red points you want to be included in irrigation period? All of them? Only part? Which part?

Based on your figures you probably will not get 100% correct answer.

Cheers
Petr



> -----Original Message-----
> From: R-help [mailto:r-help-bounces at r-project.org<mailto:r-help-bounces at r-project.org>] On Behalf Of Makram
> Belhaj Fraj
> Sent: Wednesday, December 23, 2015 8:35 AM
> To: r-help at r-project.org<mailto:r-help at r-project.org>; r-help-owner at r-project.org<mailto:r-help-owner at r-project.org>
> Subject: [R] need for help for solving operations in a vector
>
>  Dear colleagues
> i need your generous help to solve the following problem
>
> I have a  soil moisture time series qWC1 (61 values)
> > qWC1
>  75.33336 75.20617 75.20617 74.95275 74.95275 74.70059 74.70059
> 74.70059
> 74.57498 74.44968 74.32469 74.07563  85.57237 90.40123 90.73760
> 90.73760 90.73760 90.73760 90.90648 91.07582 91.24564 90.90648 86.82135
> 80.69793
> 79.30393 78.62058 78.21484 77.81226 77.67876 77.41279 77.28032 76.88495
> 76.75383 76.75383 76.49260 76.36249  76.23270 76.23270 76.10325
> 75.97412
> 75.84532 75.71685  75.71685 75.71685 75.71685 75.46087 75.46087
> 75.46087
> 75.33336 75.20617 75.20617 75.20617 75.20617 75.20617 75.20617 75.07930
> 75.07930 75.07930 74.95275 74.95275  74.95275
>
> I want to measure consecutive increases corresponding to irrigation and
> consecutive decreases  corresponding to recharge I wrote the following
> code and it does not calculate for each increment in i?
> also note that I choose to not use diff command in time series because
> I  want also that "plateaux" corresponding to a minimum of 2 equal
> consecutive values are accounted as positive differences=irrigations so
> when x[i+1]==x[i] the difference y might be equal to the previous value
> xi
>
> following the code i wrote
>
> x<-ts(qWC1,start=1, end=61, frequency=1) x[1] plot(x, type="h", col =
> "green")
> y<-rep(0,61)
> for (i in 1:61) {
> if (x[i+1] > x[i]){
>     y[i]==x[i+1]-x[i]
> } else if (x[i+1]==x[i]){
>     y[i]=x[i+2]-x[i]
> } else {
>     y[i]==x[i+1]-x[i]
> }
>
> }
> plot(y, type="h", col = "blueviolet")
>
> Many thank
> Makram
>


________________________________
Tento e-mail a jakékoliv k němu připojené dokumenty jsou důvěrné a jsou určeny pouze jeho adresátům.
Jestliže jste obdržel(a) tento e-mail omylem, informujte laskavě neprodleně jeho odesílatele. Obsah tohoto emailu i s přílohami a jeho kopie vymažte ze svého systému.
Nejste-li zamýšleným adresátem tohoto emailu, nejste oprávněni tento email jakkoliv užívat, rozšiřovat, kopírovat či zveřejňovat.
Odesílatel e-mailu neodpovídá za eventuální škodu způsobenou modifikacemi či zpožděním přenosu e-mailu.

V případě, že je tento e-mail součástí obchodního jednání:
- vyhrazuje si odesílatel právo ukončit kdykoliv jednání o uzavření smlouvy, a to z jakéhokoliv důvodu i bez uvedení důvodu.
- a obsahuje-li nabídku, je adresát oprávněn nabídku bezodkladně přijmout; Odesílatel tohoto e-mailu (nabídky) vylučuje přijetí nabídky ze strany příjemce s dodatkem či odchylkou.
- trvá odesílatel na tom, že příslušná smlouva je uzavřena teprve výslovným dosažením shody na všech jejích náležitostech.
- odesílatel tohoto emailu informuje, že není oprávněn uzavírat za společnost žádné smlouvy s výjimkou případů, kdy k tomu byl písemně zmocněn nebo písemně pověřen a takové pověření nebo plná moc byly adresátovi tohoto emailu případně osobě, kterou adresát zastupuje, předloženy nebo jejich existence je adresátovi či osobě jím zastoupené známá.

This e-mail and any documents attached to it may be confidential and are intended only for its intended recipients.
If you received this e-mail by mistake, please immediately inform its sender. Delete the contents of this e-mail with all attachments and its copies from your system.
If you are not the intended recipient of this e-mail, you are not authorized to use, disseminate, copy or disclose this e-mail in any manner.
The sender of this e-mail shall not be liable for any possible damage caused by modifications of the e-mail or by delay with transfer of the email.

In case that this e-mail forms part of business dealings:
- the sender reserves the right to end negotiations about entering into a contract in any time, for any reason, and without stating any reasoning.
- if the e-mail contains an offer, the recipient is entitled to immediately accept such offer; The sender of this e-mail (offer) excludes any acceptance of the offer on the part of the recipient containing any amendment or variation.
- the sender insists on that the respective contract is concluded only upon an express mutual agreement on all its aspects.
- the sender of this e-mail informs that he/she is not authorized to enter into any contracts on behalf of the company except for cases in which he/she is expressly authorized to do so in writing, and such authorization or power of attorney is submitted to the recipient or the person represented by the recipient, or the existence of such authorization is known to the recipient of the person represented by the recipient.

	[[alternative HTML version deleted]]



More information about the R-help mailing list