[Bioc-devel] R CMD build error for 3.10 (but not 3.11)
Shepherd, Lori
Lor|@Shepherd @end|ng |rom Ro@we||P@rk@org
Mon Mar 16 12:07:33 CET 2020
If you can make the changes just to fix the error in release than nitesh is right and it would be better to do that and follow his commands he sent earlier.
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: L Rutter <lindsayannerutter using gmail.com>
Sent: Sunday, March 15, 2020 11:03:42 PM
To: Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
Cc: Turaga, Nitesh <Nitesh.Turaga using RoswellPark.org>; bioc-devel using r-project.org <bioc-devel using r-project.org>
Subject: Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
Dear Lori and Nitesh:
Thank you both for your support. I should clarify that the changes in the devel branch (unfortunately) do include new features in addition to correcting the original source of failure. This happened inadvertently due to me still building my git skills and also me adding features requested while an associated paper was under peer review.
I am hesitant to attempt commands without consulting first as I am still improving these skillsets. Thank you again for sharing your expertise.
Sincerely,
Lindsay
2020年3月16日(月) 6:50 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
Lindsay, please wait for niteshs response as there could be intracacies with the versioning git hook that I'm not aware of.
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Bioc-devel <bioc-devel-bounces using r-project.org<mailto:bioc-devel-bounces using r-project.org>> on behalf of Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
Sent: Sunday, March 15, 2020 4:59:14 PM
To: Turaga, Nitesh <Nitesh.Turaga using RoswellPark.org>; L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
Cc: bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
Subject: Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
Hello,
Nitesh I disagree. Given this is a bug correction and the release version is failing it is perfectly reasonable for them to merge the master branch in the RELEASE_3_10 branch as long as they change the version number before committing to the git.biconductor.org<http://git.biconductor.org> branch; The changes in the devel branch as far as I am aware were to correct the failure occurring and not introducing any new features. Ideally it would have been better to do the correction on the RELEASE_3_10 and then have merged into master but as far as I am aware as long as the version number is corrected before the push they should be okay.
Lindsay then the last two steps are not correct . You should not pull and push to master as you are working on the RELEASE_3_10 branch
1) git fetch --all (get any updated branches)
2) git checkout RELEASE_3_10 upstream/RELEASE_3_10 (checkout branch)
3) git pull upstream RELEASE_3_10 (pull before any changes are made)
4) git merge master
5) Change the version number in DESCRIPTION to 1.2.1 (DO NOT FORGET THIS STEP)
6) git add DESCRIPTION
7) git commit -m <message>
8) git push upstream RELEASE_3_10
Nitesh can you verify these steps?
And Nitesh is right in the sense that in the future bug corrections should be done on the release branch and merged into the master branch as it is cleaner.
Lori Shepherd
Bioconductor Core Team
Roswell Park Comprehensive Cancer Center
Department of Biostatistics & Bioinformatics
Elm & Carlton Streets
Buffalo, New York 14263
________________________________
From: Turaga, Nitesh <Nitesh.Turaga using RoswellPark.org>
Sent: Sunday, March 15, 2020 3:31 PM
To: L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>; Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
Cc: bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
Subject: Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
You cannot merge your master branch into the RELEASE_3_10 branch.
The version number will not match, and all the devel changes will go into the release.
Instead,
1) git checkout RELEASE_3_10
2) Make the changes again in the RELEASE_3_10 branch.
3) git add <files>
4) git commit -m "<message>"
5) git push upstream RELEASE_3_10
Best,
Nitesh
On 3/15/20, 12:01 PM, "Bioc-devel on behalf of L Rutter" <bioc-devel-bounces using r-project.org<mailto:bioc-devel-bounces using r-project.org> on behalf of lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>> wrote:
Dear Lori:
Thank you for all your help. I am happy to say that the landing development
page is now building without errors
<http://bioconductor.org/packages/3.11/bioc/html/bigPint.html>. I believe
my GitHub master branch (1.3.3) and Bioconductor development branch are now
the same.
I am hoping to now likewise push what is on my GitHub master branch (1.3.3)
to the release branch of Bioconductor, which is still currently failing
(1.2.0) <http://bioconductor.org/packages/release/bioc/html/bigPint.html>.
Below are the commands I tentatively plan to use:
1) git checkout RELEASE_3_10
2) git merge master
3) Change the version number in DESCRIPTION to 1.2.1
4) git fetch --all
5) git pull upstream master
6) git push upstream master
To avoid possibly regressing on recent progress, I wanted to check with you
first if you think those steps may be suitable. I believe you recommended
the first three steps (in that order) in a previous e-mail. However, I am
not sure if the last three steps may be needed.
Thank you again for your patience and help. I believe I am slowly getting
the hang of this thanks to your support.
Sincerely,
Lindsay
2020年3月12日(木) 20:51 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
> We do see the changes now in git.bioconductor.org<http://git.bioconductor.org> so yes just keep an eye
> on the build report.
>
> cheers,
>
> Lori Shepherd
>
> Bioconductor Core Team
>
> Roswell Park Comprehensive Cancer Center
>
> Department of Biostatistics & Bioinformatics
>
> Elm & Carlton Streets
>
> Buffalo, New York 14263
> ------------------------------
> *From:* L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> *Sent:* Wednesday, March 11, 2020 4:05 AM
> *To:* Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
> *Cc:* bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
> *Subject:* Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
>
> Dear Lori:
>
> Thank you for your helpful e-mail. This is just a note that I
> completed the recommended steps:
>
> 1) Checked that my DESCRIPTION file contains version 1.3.2
> 2) Issued the following three commands:
> git fetch --all
> git pull upstream master
> git push upstream master
>
> There were no error messages, merge conflicts, etc. I will check the
> landing page after 24 hours and, if there remains an issue, will try the
> same steps as above but with version 1.3.6. If that remains an issue, I
> will update this thread.
>
> In case this could cause future problems, I notice at the top of your
> e-mail where you stated information about my latest (February 29) commit,
> it states the author as "lrutter". My GitHub userName had originally been
> "lrutter" but I updated it to "lindsayrutter" about one year ago.
> Similarly, I updated my name on the git.credentials app (
> https://git.bioconductor.org/BiocCredentials/login/?next=/BiocCredentials/)
> from "lrutter" to "lindsayrutter" on February 25. I just checked the app
> and my name is still listed as the updated "lindsayrutter". However, I am
> not sure if the commit message at the top of your e-mail may signify that
> my name still has not been comprehensively updated.
>
> I will update this thread should the problem remain and I am unsure how to
> proceed. In any case, I want to thank you very much again for your patience!
>
> Sincerely,
> Lindsay
>
>
> 2020年3月10日(火) 21:21 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
>
> I don't think you were pushing to the devel builders correctly. The last
> commit we have on the builder is Sat Feb 29th.
>
> commit b810b6a81198438d6ad26b7d86b14eece00dfa59
> Author: lrutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> Date: Sat Feb 29 23:44:08 2020 +0900
>
> Fix version issue
>
>
> So you never actually pushed the changes to the git.biocnductor upstream
> server.
>
>
> Based on what you have below please do the following and if you have any
> ERRORs please paste the command with the output so we can better assist
> you.
>
> git fetch --all
> git pull upstream master
>
> # make sure your version number is 1.3.2
> # I'm not sure if the version number higher in the history will cause
> problems. If you get an error about version number I suggest then doing
> 1.3.6
> # which is one higher than it looks like
>
> git push upstream master
>
>
>
> The upstream in these commands says to pull/push to the upstream remote
> which is pointed at the bioconductor git servers.
> The master says to pull/push from the master branch of the given
> repository.
>
> Cheers,
>
> Lori Shepherd
>
> Bioconductor Core Team
>
> Roswell Park Comprehensive Cancer Center
>
> Department of Biostatistics & Bioinformatics
>
> Elm & Carlton Streets
>
> Buffalo, New York 14263
> ------------------------------
> *From:* L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> *Sent:* Tuesday, March 10, 2020 4:11 AM
> *To:* Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
> *Cc:* bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
> *Subject:* Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
>
> Dear Lori:
>
> Thank you very much for your very helpful response. I am sorry to say that
> I still am having difficulty seeing errors I think I resolved locally get
> successfully pushed to my devel branch. I would really appreciate your
> feedback to help me possibly identify the problem.
>
> First, I checked that my git remotes are set up correctly. Below is my
> output:
>
> origin https://github.com/lindsayrutter/bigPint.git (fetch)
> origin https://github.com/lindsayrutter/bigPint.git (push)
> upstream git using git.bioconductor.org:packages/bigPint.git (fetch)
> upstream git using git.bioconductor.org:packages/bigPint.git (push)
>
> In an attempt to push changes to my devel branch, I updated my DESCRIPTION
> file to contain version 1.3.2. My last commit can be seen here
> <https://github.com/lindsayrutter/bigPint/commit/1f61951168d5ba35be6464c3f082e006ff2dd220>.
>
>
> I waited a few days and see that my builder
> <http://bioconductor.org/checkResults/devel/bioc-LATEST/bigPint/malbec2-checksrc.html>
> is still failing. The ERROR seems to be coming from my R/convertSEPair.R
> script in the line:
>
> vapply(colnames(oldData), function(x) strsplit(x, "[.]")[[1]][1])
>
> I had updated this command, changing “vapply” to “lapply”. It now reads:
>
> lapply(colnames(oldData), function(x) strsplit(x, "[.]")[[1]][1])
>
> I double-checked the R/convertSEPair.R file on my latest GitHub commit
> <https://github.com/lindsayrutter/bigPint/blob/1f61951168d5ba35be6464c3f082e006ff2dd220/R/convertSEPair.R>
> and indeed the “vapply” command is no longer present.
>
> I also note that my “Last commit” field on the builder website
> <http://bioconductor.org/checkResults/devel/bioc-LATEST/bigPint/malbec2-checksrc.html>
> is b810b6a from February 29, whereas my latest intended GitHub commit for
> the devel branch was 1f61951 from March 8.
>
> I should also state that I had tried a few times and kept bumping up my
> version number. So, on March 7 (Commit c75da1e), I had version 1.3.5. In my
> latest commit, I reduced my version number to 1.3.2 just to check that the
> reason my devel branch was still failing was not simply because my z
> (x.y.z) number was increased by more than a value of 1. However, it seems
> my pushed changes on GitHub are not updating to the devel builder website.
>
> I really thank you for sharing your advice with me. I wanted to ask if you
> may have any ideas on what I may be missing at this stage. Thank you again
> for your support.
>
> Sincerely,
> Lindsay
>
> 2020年3月3日(火) 21:30 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
>
> It can take up to 24 from a push to be reflected on the build report.
>
> For release 3.10 (RELEASE_3_10 branch) we see a version number of 1.2.0
> http://bioconductor.org/checkResults/release/bioc-LATEST/bigPint/
> and
> For devel 3.11 (master branch) we see a version number of 1.3.1 as well
> http://bioconductor.org/checkResults/devel/bioc-LATEST/bigPint/
>
> The landing page
> http://bioconductor.org/packages/3.11/bioc/html/bigPint.html will only
> be updated on a successful build/check of the package so we don't propagate
> broken packages to users. If the fixes did not allow for a clean build and
> check it would not be reflected.
>
> Also remember that in order for a change to propagate you need a valid
> version bump. So your release version 1.2.0 in order to take effect would
> have needed to be 1.2.1. And for devel master branch you would need a
> version of 1.3.2.
>
> Never apologize for asking questions. We are here to help. And we
> appreciate that you are taking the time to fix the package and learn how to
> push the changes up correct.
>
>
> I'll answer your specific questions below:
>
> Firstly make sure your git remotes are set up correctly where origin is
> your github repository and upstream is pointing to the bioconductor
> repositories
> http://bioconductor.org/developers/how-to/git/sync-existing-repositories/
>
> origin (your github)
> origin (your github)
> upstream git using git.bioconductor.org:packages/bigPint.git (fetch)
> upstream git using git.bioconductor.org:packages/bigPint.git (push)
>
> 1) Is it acceptable for me to push what is on my GitHub master branch
> (1.3.1) to the development branch of Bioconductor?
> Yes. however you will want to bump the version number in the DESCRIPTION
> to 1.3.2 because we have version 1.3.1 on our builders as indicated
> http://bioconductor.org/checkResults/devel/bioc-LATEST/bigPint/. This
> page reflects 1.3.0 because 1.3.1 has not built without ERROR and we would
> not propagate broken packages to users
> http://bioconductor.org/packages/3.11/bioc/html/bigPint.html.
>
> 2) Is it acceptable for me to likewise push what is on my GitHub master
> branch (1.3.1) to the release branch of Bioconductor? I am assuming I am
> only supposed to push the "cherry-pick" commits that resolve what had been
> causing an error originally? This may be difficult for me as I have since
> added many more changes to the master branch on GitHub after resolving that
> release error.
> Yes although not recommended but we would rather have a working package
> than one ERRORing so if you don't think you can cherry-pick than yes. The
> best option for that would be to checkout the RELEASE_3_10 branch and do a
> git merge master. You will have to change the version number in the
> DESCRIPTION to be consistent with release version numbers. (1.2.1) AFTER
> the merge.
>
> 3) Is it possible to ask if there is anything else identifiably "out of
> line" with my setup (on my GitHub master, development branch, or release
> branch)? I am sure that once I complete this process successfully I will
> have be better positioned to critically think of what is happening - but
> right now I worry that due to my earlier mistakes, something may be "off"
> with my setup that will make it difficult for me to successfully follow any
> set of instructions.
> I think you were on the right track so no further comments.
> Some helpful hints :
>
> 1. git fetch --all will fetch all branches from your origin github and
> the upstream bioconductor location (this will be important to do after the
> next release in april to get the next RELEASE_3_11 branch)
> 2. it is always a good idea to do a git pull upstream (branch name)
> to pull any changes we have made. occasionally if we made an infrastructure
> change bioconductor will apply patches. We also do the version bump
> changes at release time. So for your master devel branch git pull
> upstream master (git pull upstream RELEASE_3_10 for the current release)
> 3. If you do git merge read the out message carefully and make sure
> there are no conflicts. Conflicts means there is code that was changes in
> both files (locally and on the branch you want to merge) so you will have
> to check the file to make sure you don't include merge conflicts - The
> code conflicts are indicated with >>>>> and <<<<<. you delete those
> and keep the changes you want to commit. Then add and commit like normal
> and git should give you messages about resolving conflicts.
>
>
> Hope this helps. Let me know if you run into any further trouble.
>
> Cheers
>
>
> Lori Shepherd
>
> Bioconductor Core Team
>
> Roswell Park Comprehensive Cancer Center
>
> Department of Biostatistics & Bioinformatics
>
> Elm & Carlton Streets
>
> Buffalo, New York 14263
> ------------------------------
> *From:* L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> *Sent:* Tuesday, March 3, 2020 5:55 AM
> *To:* Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
> *Cc:* bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
> *Subject:* Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
>
> Dear Lori:
>
> Thank you for this helpful advice. I did successfully now manage to change
> my keys and name on the git.credentials app you suggested on February 25.
>
> At that time, my development version was building but my release version
> was failing. So, I followed the instructions in the link you provided on
> February 3 (
> http://bioconductor.org/developers/how-to/git/bug-fix-in-release-and-devel/)
> to update my release version. I was able to also follow the "Sync existing
> repositories" tab at the beginning of the guideline.
>
> After waiting for the updates, when I checked into my package (bigPint), I
> noticed now both the development (
> https://bioconductor.org/packages/devel/bioc/html/bigPint.html) and
> release (https://bioconductor.org/packages/release/bioc/html/bigPint.html)
> version are not building. I was surprised because I did not think I was
> making any changes to the development version through these instructions. I
> also notice my development version is 1.3.0, my release version is 1.2.0,
> and my GitHub master branch (
> https://github.com/lindsayrutter/bigPint/blob/master/DESCRIPTION) is
> version 1.3.1. It also seems that the version on my local computer reversed
> to 1.2.0.
>
> I tentatively plan to:
>
> 1) Clone my GitHub master branch (version 1.3.1) back to my local computer
> (to make sure I do not lose many recent changes I have made to my package).
> 2) Try to push my most current version (1.3.1) to the development branch
> of Bioconductor.
> 3) Try to push changes to the release branch of Bioconductor.
>
> I am pretty stuck even to the point where it is hard for me to formulate
> questions but below are a few questions that might help me identify the
> point of confusion:
> 1) Is it acceptable for me to push what is on my GitHub master branch
> (1.3.1) to the development branch of Bioconductor?
> 2) Is it acceptable for me to likewise push what is on my GitHub master
> branch (1.3.1) to the release branch of Bioconductor? I am assuming I am
> only supposed to push the "cherry-pick" commits that resolve what had been
> causing an error originally? This may be difficult for me as I have since
> added many more changes to the master branch on GitHub after resolving that
> release error.
> 3) Is it possible to ask if there is anything else identifiably "out of
> line" with my setup (on my GitHub master, development branch, or release
> branch)? I am sure that once I complete this process successfully I will
> have be better positioned to critically think of what is happening - but
> right now I worry that due to my earlier mistakes, something may be "off"
> with my setup that will make it difficult for me to successfully follow any
> set of instructions.
>
> I apologize for reaching out about this headache of an issue now. I am
> just concerned I may not be able to resolve this in a timely manner with my
> current scope of knowledge.
>
> Sincerely,
> Lindsay
>
>
> 2020年2月25日(火) 21:14 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
>
> Thank you for reaching out. Have you tried checking your keys and
> changing your name on the git.credentials app?
>
> https://git.bioconductor.org/BiocCredentials/login/?next=/BiocCredentials/
>
> Lori Shepherd
>
> Bioconductor Core Team
>
> Roswell Park Comprehensive Cancer Center
>
> Department of Biostatistics & Bioinformatics
>
> Elm & Carlton Streets
>
> Buffalo, New York 14263
> ------------------------------
> *From:* L Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> *Sent:* Tuesday, February 25, 2020 1:55 AM
> *To:* Shepherd, Lori <Lori.Shepherd using RoswellPark.org>
> *Cc:* bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
> *Subject:* Re: [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
>
> Dear Lori:
>
> Thanks for the suggestions. I tried to follow the linked instructions on
> February 4 and February 9, but was unsuccessful both times (i.e. did not
> see the changes pushed to the release branch). I tried following the
> instructions again today. I notice that when I issue the command:
>
> git merge upstream/master
>
> I receive the message:
>
> merge: upstream/master - not something we can merge
>
> So, I clicked on the "Sync existing repositories" tab and checked that the
> instructions there were working. After adding the upstream branch as
> follows:
>
> git remote add upstream git using git.bioconductor.org:packages/bigPint.git
>
> When I then try to fetch all (git fetch --all), I receive the following
> error:
>
> Fetching origin
> Fetching upstream
> FATAL: R any packages/bigpint lrutter DENIED by fallthru
> (or you mis-spelled the reponame)
> fatal: Could not read from remote repository.
> Please make sure you have the correct access rights
> and the repository exists.
> error: Could not fetch upstream
>
> I changed my GitHub userName about one year ago from "lrutter" to
> "lindsayrutter". By doing "git remote -v", I can see that my origin
> branches are correctly at "lindsayrutter", but I am unable to see about my
> upstream branches on git.bioconductor. This is my output from "git remote
> -v":
>
> origin https://github.com/lindsayrutter/bigPint (fetch)
> origin https://github.com/lindsayrutter/bigPint (push)
> upstream git using git.bioconductor.org:packages/bigpint.git (fetch)
> upstream git using git.bioconductor.org:packages/bigpint.git (push)
>
> Do you have any advice on how I can fix this issue with fetch upstream
> possibly expecting my older userName? Thank you for sharing advice.
>
> Sincerely,
> Lindsay
>
>
> 2020年2月3日(月) 21:54 Shepherd, Lori <Lori.Shepherd using roswellpark.org<mailto:Lori.Shepherd using roswellpark.org>>:
>
> It looks like you only pushed changes to the master branch which is our
> devel branch (3.11).
>
> Please see the instructions for
> http://bioconductor.org/developers/how-to/git/bug-fix-in-release-and-devel/
>
> where RELEASE_X_Y would be RELEASE_3_10 for pushing changes to the
> release 3.10 branch.
>
>
>
> Lori Shepherd
>
> Bioconductor Core Team
>
> Roswell Park Comprehensive Cancer Center
>
> Department of Biostatistics & Bioinformatics
>
> Elm & Carlton Streets
>
> Buffalo, New York 14263
> ------------------------------
> *From:* Bioc-devel <bioc-devel-bounces using r-project.org<mailto:bioc-devel-bounces using r-project.org>> on behalf of L
> Rutter <lindsayannerutter using gmail.com<mailto:lindsayannerutter using gmail.com>>
> *Sent:* Saturday, February 1, 2020 4:18 AM
> *To:* bioc-devel using r-project.org<mailto:bioc-devel using r-project.org> <bioc-devel using r-project.org<mailto:bioc-devel using r-project.org>>
> *Subject:* [Bioc-devel] R CMD build error for 3.10 (but not 3.11)
>
> Dear all:
>
> I have been receiving messages that my Bionconductor package bigPint is
> producing errors on 'R CMD build' on malbec1. I believe I discovered the
> source of the error, fixed it, and pushed changes to my GitHub account (
> github.com/lindsayrutter<http://github.com/lindsayrutter>) on December 10, 2019. I continued to receive
> this
> error notification and was advised to ensure I had pushed the changes to
> Bioconductor. I pushed changes following these instructions (
> http://bioconductor.org/developers/how-to/git/) on January 4, 2020. I am
> still receiving notifications that my package produces errors on 'R CMD
> build' on malbec1 (
>
> https://master.bioconductor.org/checkResults/3.10/bioc-LATEST/bigPint/malbec1-buildsrc.html
> ).
> However, it seems my package is no longer failing daily build reports for
> version 3.11 as of January 4, 2020 (
> http://bioconductor.org/checkResults/3.11/bioc-LATEST/).
>
> I am seeking advice on what a maintainer should try in this situation? Is
> it possible my changes were only recognized in version 3.11 but not version
> 3.10? Thank you for any advice you may have!
>
> Sincerely,
> L. Rutter
>
> [[alternative HTML version deleted]]
>
> _______________________________________________
> Bioc-devel using r-project.org<mailto:Bioc-devel using r-project.org> mailing list
> https://stat.ethz.ch/mailman/listinfo/bioc-devel
>
> This email message may contain legally privileged and/or confidential
> information. If you are not the intended recipient(s), or the employee or
> agent responsible for the delivery of this message to the intended
> recipient(s), you are hereby notified that any disclosure, copying,
> distribution, or use of this email message is prohibited. If you have
> received this message in error, please notify the sender immediately by
> e-mail and delete this email message from your computer. Thank you.
>
>
> This email message may contain legally privileged and/or confidential
> information. If you are not the intended recipient(s), or the employee or
> agent responsible for the delivery of this message to the intended
> recipient(s), you are hereby notified that any disclosure, copying,
> distribution, or use of this email message is prohibited. If you have
> received this message in error, please notify the sender immediately by
> e-mail and delete this email message from your computer. Thank you.
>
>
> This email message may contain legally privileged and/or confidential
> information. If you are not the intended recipient(s), or the employee or
> agent responsible for the delivery of this message to the intended
> recipient(s), you are hereby notified that any disclosure, copying,
> distribution, or use of this email message is prohibited. If you have
> received this message in error, please notify the sender immediately by
> e-mail and delete this email message from your computer. Thank you.
>
>
> This email message may contain legally privileged and/or confidential
> information. If you are not the intended recipient(s), or the employee or
> agent responsible for the delivery of this message to the intended
> recipient(s), you are hereby notified that any disclosure, copying,
> distribution, or use of this email message is prohibited. If you have
> received this message in error, please notify the sender immediately by
> e-mail and delete this email message from your computer. Thank you.
>
>
> This email message may contain legally privileged and/or confidential
> information. If you are not the intended recipient(s), or the employee or
> agent responsible for the delivery of this message to the intended
> recipient(s), you are hereby notified that any disclosure, copying,
> distribution, or use of this email message is prohibited. If you have
> received this message in error, please notify the sender immediately by
> e-mail and delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
_______________________________________________
Bioc-devel using r-project.org<mailto:Bioc-devel using r-project.org> mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
This email message may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for the delivery of this message to the intended recipient(s), you are hereby notified that any disclosure, copying, distribution, or use of this email message is prohibited. If you have received this message in error, please notify the sender immediately by e-mail and delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
_______________________________________________
Bioc-devel using r-project.org<mailto:Bioc-devel using r-project.org> mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
This email message may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for the delivery of this message to the intended recipient(s), you are hereby notified that any disclosure, copying, distribution, or use of this email message is prohibited. If you have received this message in error, please notify the sender immediately by e-mail and delete this email message from your computer. Thank you.
This email message may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for the delivery of this message to the intended recipient(s), you are hereby notified that any disclosure, copying, distribution, or use of this email message is prohibited. If you have received this message in error, please notify the sender immediately by e-mail and delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
More information about the Bioc-devel
mailing list