Hello I have tried as you.
On Mac the way to succeed might be to partition your mac on 2 systems.
The Mac os
The Ubuntu I have tried many attempts.
I decided to work to make sure I use r and r commander
Best Regards
Henri

2012/5/8 Simon Urbanek <simon.urbanek@r-project.org>

> Joe,
>
> On May 8, 2012, at 8:53 AM, Joe Schwab wrote:
>
> > Hello all,
> >
> > I am in the process of installing the latest CRAN repository versions of
> Rserve (0.6-8) and FastRWeb (1.0-1) on MacOS 10.6.8 machine. I have
> installed Rserve and verified that it can start up just fine on its own
> both by using the following commands in the R GUI:
> >
> > library(Rserve)
> > Rserve(args="--no-save")
> >
> > and by running "R CMD Rserve" from the command line.
>
>
> > After doing either of those methods I can telnet to my localhost port
> 6311 and verify that Rserve is running.
>
> That's entirely irrelevant since FastRWeb doesn't use TCP/IP - make sure
> you are running the correct Rserve settings which are *not* on port 6311.
> All you need to do it to use the start script.
>
>
> > However, when I try to start Rserve
> > (after killing any existing processes) by using the FastRWeb
> > code/start script, I get the following error:
> >
> > ##> SOCK_ERROR: bind error #13(access denied)
> >
>
> You seem to have permission issues on the socket or the FastRWeb directory
> - check the permissions on
> /var/FastRWeb/socket
> You should make sure that _www has both read and write access. Remove it
> before starting if in doubt. If it's not there, make sure that the user
> under which you run Rserve has write permissions in /vat/FastRWeb. That
> applies to the other directories as well - it will need write permissions
> on tmp and _www must be able to read web.R and tmp.
>
> Cheers,
> Simon
>
> PS: stats-rosuda-devel is the mailing list for Rserve/FastRWeb questions
>
>
> > When I go into R GUI and run this under debug mode I get the same end
> > result. Here is the session transcript from R:
> >
> > # START SESSION TRANSCRIPT
> >> Rserve(TRUE, args="--RS-conf /var/FastRWeb/code/rserve.conf --vanilla
> --no-save")
> > Starting Rserve on port 6311 :
> > /Library/Frameworks/R.framework/Resources/bin/R CMD
> >
> /Library/Frameworks/R.framework/Versions/2.15/Resources/library/Rserve/libs/x86_64/Rserve-dbg.so
> > --RS-conf /var/FastRWeb/code/rserve.conf --vanilla --no-save
> >
> > Note: debug version of Rserve doesn't daemonize so your R session will
> > be blocked until you shut down Rserve.
> > Rserve 0.6-8 (338) (C)Copyright 2002-2011 Simon Urbanek
> > $Id: Rserv.c 338 2012-02-11 20:52:25Z urbanek $
> >
> > Loading config file /etc/Rserv.conf
> > Failed to find config file /etc/Rserv.conf
> > Loading config file /var/FastRWeb/code/rserve.conf
> > conf> command="socket", parameter="/var/FastRWeb/socket"
> > conf> command="sockmod", parameter="0666"
> > conf> command="source", parameter="/var/FastRWeb/code/rserve.R"
> > Found source entry "/var/FastRWeb/code/rserve.R"
> > conf> command="control", parameter="enable"
> > Loaded config file /var/FastRWeb/code/rserve.conf
> >
> > R version 2.15.0 (2012-03-30)
> > Copyright (C) 2012 The R Foundation for Statistical Computing
> > ISBN 3-900051-07-0
> > Platform: x86_64-apple-darwin9.8.0/x86_64 (64-bit)
> >
> > R is free software and comes with ABSOLUTELY NO WARRANTY.
> > You are welcome to redistribute it under certain conditions.
> > Type 'license()' or 'licence()' for distribution details.
> >
> > Natural language support but running in an English locale
> >
> > R is a collaborative project with many contributors.
> > Type 'contributors()' for more information and
> > 'citation()' on how to cite R or R packages in publications.
> >
> > Type 'demo()' for some demos, 'help()' for on-line help, or
> > 'help.start()' for an HTML browser interface to help.
> > Type 'q()' to quit R.
> >
> > Executing source/eval commands from the config file.
> > voidEval("try(source("/var/FastRWeb/code/rserve.R"))")
> > voidEval: buffer parsed, stat=1, parts=1
> > result type: 20, length: 1
> > R_tryEval(xp,R_GlobalEnv,&Rerror);
> > Calling R_tryEval for expression 1 [type=6] ...
> > Starting Rserve on pc24015
> > Loading packages...
> > XML: FALSE
> > Cairo: TRUE
> > Matrix: TRUE
> > FastRWeb: TRUE
> > ##> SOCK_ERROR: bind error #13(access denied)
> > Expression 1, error code: 0
> > Done with initial commands.
> > Rserve: Ok, ready to answer queries.
> >
> > # END SESSION TRANSCRIPT
> >
> > At this point there is no Rserve process running, and telnetting to
> > port 6311 confirms no process is listening on that port. Any guidance
> > or help would be appreciated.
> >
> > Cheers,
> > Joe Schwab
> >
> > _______________________________________________
> > R-SIG-Mac mailing list
> > R-SIG-Mac@r-project.org
> > https://stat.ethz.ch/mailman/listinfo/r-sig-mac
> >
> >
>
> _______________________________________________
> R-SIG-Mac mailing list
> R-SIG-Mac@r-project.org
> https://stat.ethz.ch/mailman/listinfo/r-sig-mac
>



-- 
Henri
Henri 亨利 (Hēng lì)
33 6 79 66 26 64

	[[alternative HTML version deleted]]

