[R-SIG-Mac] Building R-devel from source (solved)

peter dalgaard pd@|gd @end|ng |rom gm@||@com
Mon Aug 19 16:00:03 CEST 2019 

OK, I now got a clang7 build running on a machine here too.

Simon, if you are listening: The alternative instructions to installing SDK to /usr/include seems to be incomplete. With

CPPFLAGS="-isysroot /Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include"

I got a succesful compile, but the link phase dies looking for -lSystem or somesuch. I.e., I think something needs to happen with LDFLAGS as well. This of course only shows up if you do not install the SDK to /usr/include.

-pd

> On 19 Aug 2019, at 11:54 , Göran Broström <goran.brostrom using umu.se> wrote:
> 
> Here is the report I promised. I followed the path below:
> 
> 1. Got source from CRAN.
> 
> 2. Read instructions under "Download R for (Mac) OS X"
> (shouldn't that read "Download R for macOS" nowadays?). Especially the note Important: "If you wish to compile R packages ..., see the tools directory."
> 
> 3. In the tools directory: Download and install clang-7.0.0.pkg (I see now that I should have chosen clang-8.0.0 for R 3.7.0, which is R-devel?). Also download and install gfortran-6.1.pkg (It says: "To be used with El Capitan builds of R.", which worried me a little, since I am on High Sierra, but there were no alternatives.)
> 
> With this setup I got my first reported error. Thanks to Peter, I went on to
> 
> https://cran.r-project.org/doc/manuals/r-release/Radmin.html#macOS,
> 
> where I read
> 
> ------
> One way to use these builds with a binary distribution of R is to have a ~/.R/Makevars file similar to (El Capitan)
> 
> FC = /usr/local/gfortran/bin/gfortran
> FLIBS = -L/usr/local/gfortran/lib/gcc/x86_64-apple-darwin15/6.1.0
>  -L/usr/local/gfortran/lib -lgfortran -lquadmath -lm
> 
> or (Sierra or High Sierra)
> 
> FC = /usr/local/gfortran/bin/gfortran
> FLIBS = -L/usr/local/gfortran/lib/gcc/x86_64-apple-darwin16/6.3.0
>  -L/usr/local/gfortran/lib -lgfortran -lquadmath -lm
> ------
> 
> I naively chose the "Sierra or High Sierra" alternative, but that was wrong as you can see: It apparently refers to gfortran 6.3, so I switched to the the "El Capitan" alternative.
> 
> The final error message was then something about 'unable to compile mixed C and Fortran code', and that was fixed by changing
> 
> LDFLAGS="-L/usr/local/clang7/lib -L/usr/local/lib"
> 
> to
> 
> LDFLAGS="-L/usr/local/clang7/lib -L/usr/local/gfortran/lib
> -L/usr/local/gfortran/lib/gcc/x86_64-apple-darwin15/6.1.0"
> 
> and voila, ./configure run without complaints!
> 
> The later build also went smoothly (but I had to install java).
> 
> So, to sum up, there seems to be some discrepancy between the two
> instruction sets I tried to follow.
> 
> Göran
> 
> 
> 
> 
> Den 2019-08-19 kl. 00:06, skrev Göran Broström:
>> Den 2019-08-18 kl. 22:16, skrev peter dalgaard:
>>> /usr/local/clang7 is likely a better place to look. Check out Appendix C.3 of the R Inst.&Adm. manual:
>>> 
>>> https://cran.r-project.org/doc/manuals/r-release/R-admin.html#macOS
>> That's better! After correcting some obvious(?) errors(?) in that page, ./configure run without errors! (Had only read mac.r-procject.org/tools/ so far).
>> After a night's sleep I will 'make'. I'll report back to r-sig-mac.
>> Thanks, Göran
>>> 
>>> -pd
>>> 
>>>> On 18 Aug 2019, at 21:35 , Göran Broström <goran.brostrom using umu.se> wrote:
>>>> 
>>>> Update: There is a libgcc_s.1.dylib in /usr/lib, as a symlink to /usr/lib/libSystem.B.dylib. Is that one useful?
>>>> 
>>>> Göran
>>>> 
>>>> Den 2019-08-18 kl. 18:54, skrev Göran Broström:
>>>>> Thanks Peter,
>>>>> The tripping lines are here
>>>>> configure:24611: checking size of size_t
>>>>> configure:24616: gcc -o conftest -g -O2 -I/usr/local/include -L/usr/local/lib conftest.c -ldl -lm  >\
>>>>> &5
>>>>> configure:24616: $? = 0
>>>>> configure:24616: ./conftest
>>>>> dyld: Library not loaded: /usr/local/lib/libgcc_s.1.dylib
>>>>>    Referenced from: /Users/gb/R/src/R-devel/./conftest
>>>>>    Reason: image not found
>>>>> so it seems as if my installation of tools is lacking an essential part (/usr/local/lib/libgcc_s.1.dylib). I'll look around, but any suggestion is welcome!
>>>>> Göran
>>>>> Den 2019-08-18 kl. 17:56, skrev peter dalgaard:
>>>>>> I can't claim to understand this, but on my system of same age, using system clang, configure does complete. It does get that error on line 23748, but that, and several similar subsequent tests just end up returning "yes".
>>>>>> 
>>>>>> configure:23748: checking for size_t
>>>>>> configure:23748: gcc -arch x86_64 -c -g -O2 -I/usr/local/include conftest.c >&5
>>>>>> configure:23748: $? = 0
>>>>>> configure:23748: gcc -arch x86_64 -c -g -O2 -I/usr/local/include conftest.c >&5
>>>>>> conftest.c:118:21: error: expected expression
>>>>>> if (sizeof ((size_t)))
>>>>>>                       ^
>>>>>> 1 error generated.
>>>>>> [..snip..]
>>>>>> configure:23748: result: yes
>>>>>> 
>>>>>> (as usual, configure code is nigh on unreadable, but I think the logic is that the size_t type exists if you can do "sizeof (size_t)", but not "sizeof ((size_t))", so the error is expected.)
>>>>>> 
>>>>>> The line that trips you up comes later:
>>>>>> 
>>>>>> configure:24611: checking size of size_t
>>>>>> configure:24616: gcc -arch x86_64 -o conftest -g -O2 -I/usr/local/include -L/usr/
>>>>>> local/lib conftest.c -ldl -lm  >&5
>>>>>> configure:24616: $? = 0
>>>>>> configure:24616: ./conftest
>>>>>> configure:24616: $? = 0
>>>>>> configure:24630: result: 8
>>>>>> 
>>>>>> so that is where you should look for clues (or at least tell us what it says there).
>>>>>> 
>>>>>> -pd
>>>>>> 
>>>>>>> On 18 Aug 2019, at 13:34 , Göran Broström <goran.brostrom using umu.se> wrote:
>>>>>>> 
>>>>>>> Hello,
>>>>>>> 
>>>>>>> I'm (for the first time) trying to build R-devel from source (to be able to check my CRAN packages on a Mac), but it breaks already after
>>>>>>> 
>>>>>>> gobr0002 using MBP-2:~/R/src/R-devel$ ./configure
>>>>>>> 
>>>>>>> with
>>>>>>> 
>>>>>>> checking size of size_t... configure: error: in `/Users/gb/R/src/R-devel':
>>>>>>> configure: error: cannot compute sizeof (size_t)
>>>>>>> See `config.log' for more details
>>>>>>> 
>>>>>>> Some 'details' regarding size_t:
>>>>>>> 
>>>>>>> configure:23748: checking for size_t
>>>>>>> configure:23748: gcc -c -g -O2 -I/usr/local/include conftest.c >&5
>>>>>>> configure:23748: $? = 0
>>>>>>> configure:23748: gcc -c -g -O2 -I/usr/local/include conftest.c >&5
>>>>>>> conftest.c: In function 'main':
>>>>>>> conftest.c:116:21: error: expected expression before ')' token
>>>>>>> if (sizeof ((size_t)))
>>>>>>>                       ^
>>>>>>> 
>>>>>>> My MacBook Pro is old (2010), so I am stuck with MacOS 10.13.6, XCode 10.1. I'm using clang 7.0.0 and fortran 6.1.0.
>>>>>>> 
>>>>>>> Do I need to buy a new Mac?
>>>>>>> 
>>>>>>> Thanks, Göran
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> R-SIG-Mac mailing list
>>>>>>> R-SIG-Mac using r-project.org
>>>>>>> https://stat.ethz.ch/mailman/listinfo/r-sig-mac
>>>>>> 
>>>>> _______________________________________________
>>>>> R-SIG-Mac mailing list
>>>>> R-SIG-Mac using r-project.org
>>>>> https://stat.ethz.ch/mailman/listinfo/r-sig-mac
>>>> 
>>>> _______________________________________________
>>>> R-SIG-Mac mailing list
>>>> R-SIG-Mac using r-project.org
>>>> https://stat.ethz.ch/mailman/listinfo/r-sig-mac
>>> 
>> _______________________________________________
>> R-SIG-Mac mailing list
>> R-SIG-Mac using r-project.org
>> https://stat.ethz.ch/mailman/listinfo/r-sig-mac
> 
> _______________________________________________
> R-SIG-Mac mailing list
> R-SIG-Mac using r-project.org
> https://stat.ethz.ch/mailman/listinfo/r-sig-mac

-- 
Peter Dalgaard, Professor,
Center for Statistics, Copenhagen Business School
Solbjerg Plads 3, 2000 Frederiksberg, Denmark
Phone: (+45)38153501
Office: A 4.23
Email: pd.mes using cbs.dk  Priv: PDalgd using gmail.com

More information about the R-SIG-Mac mailing list