[R-sig-Geo] Trouble installing rgdal
Roger Bivand
Roger@B|v@nd @end|ng |rom nhh@no
Sun Jul 5 15:52:42 CEST 2020
The revisions needed to install on PROJ 6.1.0 and GDAL 3.0.0 involved a
compiled function that only entered PROJ in 6.2.0, another that only
entered GDAL in 3.0.1, and bugs in handling +proj=ob_tran in PROJ 6.0.0,
6.1.0 and 6.1.1. Revision 1031 covering these and letting rgdal install on
these (oldish) versions has been committed to R-Forge, and when the build
completes will answer the intial question. The package installed using the
old PROJ API because that choice also avoided the problem with GDAL, but
didn't advance to being able to use WKT2 instead of Proj4 strings
internally (with sp >= 1.4). In any case, GDAL 3.0.4 and PROJ 6.3.1 or
later is a safer choice, but at least now those obliged to stay with
earlier GDAL 3 and PROJ 6 should be covered.
Roger
On Sat, 4 Jul 2020, Thomas Adams wrote:
> Hi Roger!
>
> I updated GDAL and PROJ to 3.0.4 and 6.3.1, respectively... the install
> worked perfectly using:
>
> sudo R CMD INSTALL rgdal_1.5-13.tar.gz
>
> Thank you so much!
>
> Best,
> Tom
>
> On Fri, Jul 3, 2020 at 11:24 AM Roger Bivand <Roger.Bivand using nhh.no> wrote:
>
>> On Fri, 3 Jul 2020, Roger Bivand wrote:
>>
>>> On Fri, 3 Jul 2020, Thomas Adams wrote:
>>>
>>>> Hi Roger,
>>>>
>>>> I just tried re-installing withou using the argument and got this:
>>>
>>> Very useful, thanks - painful but another case of staying too close to
>> the
>>> front. proj_create_crs_to_crs_from_pj() was new in PROJ 6.2.0. I'll try
>> to
>>> adapt to accommodate older PROJ 6.
>>
>> Re-creating a GDAL 3.0.0 with PROJ 6.1.0 platform has thrown up another
>> issue which which I'm struggling. I'll try to resolve it, but until then
>> advice would be to update GDAL and PROJ to 3.0.4 and 6.3.1, which we know
>> work (those are the versions in the CRAN Windows binary).
>>
>> Roger
>>
>>>
>>> Roger
>>>
>>>>
>>>> teaiii using teaiii-Leopard-WS:~$ sudo R CMD INSTALL rgdal_1.5-13.tar.gz
>>>> * installing to library
>> ‘/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0’
>>>> * installing *source* package ‘rgdal’ ...
>>>> ** using staged installation
>>>> configure: R_HOME: /usr/local/lib/R
>>>> configure: CC: gcc
>>>> configure: CXX: g++ -std=gnu++11
>>>> configure: CFLAGS: -g -O2
>>>> configure: CPPFLAGS: -I/usr/local/include
>>>> configure: CXXFLAGS: -g -O2
>>>> configure: LDFLAGS: -L/usr/local/lib
>>>> configure: LDFLAGS: -L/usr/local/lib
>>>> configure: CXX11 is: g++, CXX11STD is: -std=gnu++11
>>>> configure: CXX is: g++ -std=gnu++11
>>>> configure: C++11 support available
>>>> configure: rgdal: 1.5-13
>>>> checking for /usr/bin/svnversion... yes
>>>> cat: inst/SVN_VERSION: No such file or directory
>>>> configure: svn revision:
>>>> checking for gdal-config... /usr/local/bin/gdal-config
>>>> checking gdal-config usability... yes
>>>> configure: GDAL: 3.0.0
>>>> checking GDAL version >= 1.11.4... yes
>>>> checking GDAL version <= 2.5 or >= 3.0... yes
>>>> checking GDAL: linking with --libs only... yes
>>>> checking GDAL: gdal-config data directory readable... yes
>>>> checking GDAL: /usr/local/share/gdal/stateplane.csv readable... yes
>>>> configure: pkg-config proj exists, will use it
>>>> configure: PROJ version: 6.1.0
>>>> configure: PROJ CPP flags: -DPROJ_H_API -I/usr/local/include
>>>> configure: PROJ LIBS: -L/usr/local/lib -lproj
>>>> checking PROJ header API:... yes
>>>> checking whether the C++ compiler works... yes
>>>> checking for C++ compiler default output file name... a.out
>>>> checking for suffix of executables...
>>>> checking whether we are cross compiling... no
>>>> checking for suffix of object files... o
>>>> checking whether we are using the GNU C++ compiler... yes
>>>> checking whether g++ -std=gnu++11 accepts -g... yes
>>>> checking how to run the C++ preprocessor... g++ -std=gnu++11 -E
>>>> checking for grep that handles long lines and -e... /bin/grep
>>>> checking for egrep... /bin/grep -E
>>>> checking for ANSI C header files... yes
>>>> checking for sys/types.h... yes
>>>> checking for sys/stat.h... yes
>>>> checking for stdlib.h... yes
>>>> checking for string.h... yes
>>>> checking for memory.h... yes
>>>> checking for strings.h... yes
>>>> checking for inttypes.h... yes
>>>> checking for stdint.h... yes
>>>> checking for unistd.h... yes
>>>> checking proj.h usability... yes
>>>> checking proj.h presence... yes
>>>> checking for proj.h... yes
>>>> checking for proj_context_create in -lproj... yes
>>>> checking Using GDAL < 3 with PROJ >= 6... no
>>>> checking PROJ version >= 4.8.0... yes
>>>> checking PROJ: proj.db found and readable... yes
>>>> configure: Package CPP flags: -I/usr/local/include
>> -I/usr/local/include
>>>> -DPROJ_H_API
>>>> configure: Package LIBS: -L/usr/local/lib -lgdal -L/usr/local/lib
>> -lproj
>>>> configure: creating ./config.status
>>>> config.status: creating src/Makevars
>>>> ** libs
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c OGR_write.cpp -o OGR_write.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c gdal-bindings.cpp -o
>>>> gdal-bindings.o
>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c init.c -o init.o
>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c inverser.c -o inverser.o
>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c local_stubs.c -o local_stubs.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c ogr_geom.cpp -o ogr_geom.o
>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c ogr_polygons.c -o
>> ogr_polygons.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c ogr_proj.cpp -o ogr_proj.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c ogrdrivers.cpp -o ogrdrivers.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c ogrsource.cpp -o ogrsource.o
>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>> -I/usr/local/include
>>>> -I/usr/local/include -DPROJ_H_API
>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>> -I/usr/local/include -fpic -g -O2 -c proj6.cpp -o proj6.o
>>>> proj6.cpp: In function ‘SEXPREC* transform_ng(SEXP, SEXP, SEXP, SEXP,
>>>> SEXP,
>>>> SEXP, SEXP)’:
>>>> proj6.cpp:521:29: error: ‘proj_create_crs_to_crs_from_pj’ was not
>> declared
>>>> in this scope
>>>> if ((pj_transform =
>> proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX,
>>>> source_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj6.cpp:521:29: note: suggested alternative: ‘proj_create_crs_to_crs’
>>>> if ((pj_transform =
>> proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX,
>>>> source_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj_create_crs_to_crs
>>>> proj6.cpp: In function ‘SEXPREC* project_ng_coordOp(SEXP, SEXP)’:
>>>> proj6.cpp:704:33: error: ‘proj_create_crs_to_crs_from_pj’ was not
>> declared
>>>> in this scope
>>>> if (use_inv) pj_transform =
>>>> proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX, target_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj6.cpp:704:33: note: suggested alternative: ‘proj_create_crs_to_crs’
>>>> if (use_inv) pj_transform =
>>>> proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX, target_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj_create_crs_to_crs
>>>> proj6.cpp:706:25: error: ‘proj_create_crs_to_crs_from_pj’ was not
>> declared
>>>> in this scope
>>>> else pj_transform = proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX,
>>>> source_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj6.cpp:706:25: note: suggested alternative: ‘proj_create_crs_to_crs’
>>>> else pj_transform = proj_create_crs_to_crs_from_pj(PJ_DEFAULT_CTX,
>>>> source_crs,
>>>> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> proj_create_crs_to_crs
>>>> /usr/local/lib/R/etc/Makeconf:176: recipe for target 'proj6.o' failed
>>>> make: *** [proj6.o] Error 1
>>>> ERROR: compilation failed for package ‘rgdal’
>>>> * removing ‘/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/rgdal’
>>>> * restoring previous
>>>> ‘/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/rgdal’
>>>>
>>>> On Fri, Jul 3, 2020 at 5:45 AM Roger Bivand <Roger.Bivand using nhh.no>
>> wrote:
>>>>
>>>>> On Thu, 2 Jul 2020, Thomas Adams wrote:
>>>>>
>>>>>> Roger,
>>>>>>
>>>>>> Thank you so much; after downloading the *.tar.gz file, the that did
>> the
>>>>>> trick, using:
>>>>>>
>>>>>> sudo R CMD INSTALL --configure-args=--with-proj_api="proj_api.h"
>>>>>> rgdal_1.5-13.tar.gz
>>>>>
>>>>> Since you have GDAL: 3.0.0 and PROJ version: 6.1.0, you can drop
>>>>> --configure-args=--with-proj_api="proj_api.h", which is only needed if
>>>>> GDAL < 3 and PROJ >= 6. I'm uncertain how stable a system will be if
>> GDAL
>>>>>> = 3 && PROJ >= 6 with this configure argument, as it is only a
>>>>> work-around for systems with GDAL < 3 and PROJ >= 6, and onnly tested
>> in
>>>>> that setting.
>>>>>
>>>>> Thanks for reporting back!
>>>>>
>>>>> Roger
>>>>>
>>>>>>
>>>>>> Best regards!
>>>>>> Tom
>>>>>>
>>>>>>
>>>>>> On Thu, Jul 2, 2020 at 3:15 PM Roger Bivand <Roger.Bivand using nhh.no>
>> wrote:
>>>>>>
>>>>>>> On Thu, 2 Jul 2020, Thomas Adams wrote:
>>>>>>>
>>>>>>>> Hi Bennet!
>>>>>>>>
>>>>>>>> Thank you for your help, but I get the same error...
>>>>>>>
>>>>>>> Tom,
>>>>>>>
>>>>>>> Once rgdal revision 1029 completes building (check first) on:
>>>>>>>
>>>>>>> https://r-forge.r-project.org/R/?group_id=884
>>>>>>>
>>>>>>> please re-try. The missing function is not in the GDAL 3.0.0
>> headers,
>>>>> but
>>>>>>> is in the 3.0.1 headers. I've modified the check so as not to try
>> for
>>>>> just
>>>>>>>> = 3 to >= 3.0.1.
>>>>>>>
>>>>>>> Roger
>>>>>>>
>>>>>>>>
>>>>>>>> Tom
>>>>>>>>
>>>>>>>> On Thu, Jul 2, 2020 at 2:01 PM Bennet Fauber <bennet using umich.edu>
>> wrote:
>>>>>>>>
>>>>>>>>> You might try this
>>>>>>>>>
>>>>>>>>> install.packages("rgdal", "/sw/arcts/centos7/Rgeospatial/062020",
>>>>>>>>> repos="http://R-Forge.R-project.org")
>>>>>>>>>
>>>>>>>>> as there have been recent patches to rgdal that might help that
>> have
>>>>>>>>> been incorporated there.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, Jul 2, 2020 at 1:47 PM Thomas Adams <tea3rd using gmail.com>
>> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi all,
>>>>>>>>>>
>>>>>>>>>> I have searched the internet and have spent a few days trying to
>> get
>>>>> to
>>>>>>>>> the
>>>>>>>>>> problem when I try to install rgdal into my Ubuntu 18.04 system.
>> I
>>>>> have
>>>>>>>>>> done this many times previously, but cannot seem to track down
>> what
>>>>>>>>>> I
>>>>>>> am
>>>>>>>>>> doing wrong now. I have tried a forced install from sources with
>> and
>>>>>>>>>> without dependencies. Below is what I get. Any help is
>> appreciated.
>>>>>>>>>>
>>>>>>>>>> Tom
>>>>>>>>>>
>>>>>>>>>>> install.packages("rgdal")
>>>>>>>>>> Installing package into
>>>>>>> ‘/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0’
>>>>>>>>>> (as ‘lib’ is unspecified)
>>>>>>>>>> trying URL '
>> https://cran.case.edu/src/contrib/rgdal_1.5-12.tar.gz'
>>>>>>>>>> Content type 'application/x-gzip' length 2302403 bytes (2.2 MB)
>>>>>>>>>> ==================================================
>>>>>>>>>> downloaded 2.2 MB
>>>>>>>>>>
>>>>>>>>>> * installing *source* package ‘rgdal’ ...
>>>>>>>>>> ** package ‘rgdal’ successfully unpacked and MD5 sums checked
>>>>>>>>>> ** using staged installation
>>>>>>>>>> configure: R_HOME: /usr/local/lib/R
>>>>>>>>>> configure: CC: gcc
>>>>>>>>>> configure: CXX: g++ -std=gnu++11
>>>>>>>>>> configure: CXX11 is: g++, CXX11STD is: -std=gnu++11
>>>>>>>>>> configure: CXX is: g++ -std=gnu++11
>>>>>>>>>> configure: C++11 support available
>>>>>>>>>> configure: rgdal: 1.5-12
>>>>>>>>>> checking for /usr/bin/svnversion... yes
>>>>>>>>>> configure: svn revision: 1018
>>>>>>>>>> checking for gdal-config... /usr/local/bin/gdal-config
>>>>>>>>>> checking gdal-config usability... yes
>>>>>>>>>> configure: GDAL: 3.0.0
>>>>>>>>>> checking GDAL version >= 1.11.4... yes
>>>>>>>>>> checking GDAL version <= 2.5 or >= 3.0... yes
>>>>>>>>>> checking GDAL: linking with --libs only... yes
>>>>>>>>>> checking GDAL: gdal-config data directory readable... yes
>>>>>>>>>> checking GDAL: /usr/local/share/gdal/stateplane.csv readable...
>> yes
>>>>>>>>>> configure: pkg-config proj exists, will use it
>>>>>>>>>> configure: PROJ version: 6.1.0
>>>>>>>>>> configure: PROJ CPP flags: -DPROJ_H_API -I/usr/local/include
>>>>>>>>>> configure: PROJ LIBS: -L/usr/local/lib -lproj
>>>>>>>>>> checking PROJ header API:... yes
>>>>>>>>>> checking whether the C++ compiler works... yes
>>>>>>>>>> checking for C++ compiler default output file name... a.out
>>>>>>>>>> checking for suffix of executables...
>>>>>>>>>> checking whether we are cross compiling... no
>>>>>>>>>> checking for suffix of object files... o
>>>>>>>>>> checking whether we are using the GNU C++ compiler... yes
>>>>>>>>>> checking whether g++ -std=gnu++11 accepts -g... yes
>>>>>>>>>> checking how to run the C++ preprocessor... g++ -std=gnu++11 -E
>>>>>>>>>> checking for grep that handles long lines and -e... /bin/grep
>>>>>>>>>> checking for egrep... /bin/grep -E
>>>>>>>>>> checking for ANSI C header files... yes
>>>>>>>>>> checking for sys/types.h... yes
>>>>>>>>>> checking for sys/stat.h... yes
>>>>>>>>>> checking for stdlib.h... yes
>>>>>>>>>> checking for string.h... yes
>>>>>>>>>> checking for memory.h... yes
>>>>>>>>>> checking for strings.h... yes
>>>>>>>>>> checking for inttypes.h... yes
>>>>>>>>>> checking for stdint.h... yes
>>>>>>>>>> checking for unistd.h... yes
>>>>>>>>>> checking proj.h usability... yes
>>>>>>>>>> checking proj.h presence... yes
>>>>>>>>>> checking for proj.h... yes
>>>>>>>>>> checking for proj_context_create in -lproj... yes
>>>>>>>>>> checking Using GDAL < 3 with PROJ >= 6... no
>>>>>>>>>> checking PROJ version >= 4.8.0... yes
>>>>>>>>>> checking PROJ: proj.db found and readable... yes
>>>>>>>>>> configure: Package CPP flags: -I/usr/local/include
>>>>>>> -I/usr/local/include
>>>>>>>>>> -DPROJ_H_API
>>>>>>>>>> configure: Package LIBS: -L/usr/local/lib -lgdal
>> -L/usr/local/lib
>>>>>>> -lproj
>>>>>>>>>> configure: creating ./config.status
>>>>>>>>>> config.status: creating src/Makevars
>>>>>>>>>> ** libs
>>>>>>>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>>>>>>> -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c OGR_write.cpp -o
>>>>>>>>>> OGR_write.o
>>>>>>>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>>>>>>> -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c gdal-bindings.cpp -o
>>>>>>>>>> gdal-bindings.o
>>>>>>>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c init.c -o init.o
>>>>>>>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c inverser.c -o inverser.o
>>>>>>>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c local_stubs.c -o
>>>>> local_stubs.o
>>>>>>>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>>>>>>> -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c ogr_geom.cpp -o
>> ogr_geom.o
>>>>>>>>>> gcc -I"/usr/local/lib/R/include" -DNDEBUG -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c ogr_polygons.c -o
>>>>>>> ogr_polygons.o
>>>>>>>>>> g++ -std=gnu++11 -I"/usr/local/lib/R/include" -DNDEBUG
>>>>>>>>> -I/usr/local/include
>>>>>>>>>> -I/usr/local/include -DPROJ_H_API
>>>>>>>>>> -I'/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/sp/include'
>>>>>>>>>> -I/usr/local/include -fpic -g -O2 -c ogr_proj.cpp -o
>> ogr_proj.o
>>>>>>>>>> ogr_proj.cpp: In function ‘SEXPREC* R_GDAL_OSR_PROJ()’:
>>>>>>>>>> ogr_proj.cpp:163:9: error: ‘OSRGetPROJVersion’ was not declared
>> in
>>>>> this
>>>>>>>>>> scope
>>>>>>>>>> OSRGetPROJVersion(&pnMajor, &pnMinor, &pnPatch);
>>>>>>>>>> ^~~~~~~~~~~~~~~~~
>>>>>>>>>> ogr_proj.cpp:163:9: note: suggested alternative: ‘OSRProjVersion’
>>>>>>>>>> OSRGetPROJVersion(&pnMajor, &pnMinor, &pnPatch);
>>>>>>>>>> ^~~~~~~~~~~~~~~~~
>>>>>>>>>> OSRProjVersion
>>>>>>>>>> /usr/local/lib/R/etc/Makeconf:176: recipe for target 'ogr_proj.o'
>>>>>>> failed
>>>>>>>>>> make: *** [ogr_proj.o] Error 1
>>>>>>>>>> ERROR: compilation failed for package ‘rgdal’
>>>>>>>>>> * removing ‘/home/teaiii/R/x86_64-pc-linux-gnu-library/4.0/rgdal’
>>>>>>>>>>
>>>>>>>>>> The downloaded source packages are in
>>>>>>>>>> ‘/tmp/RtmpNkdFOf/downloaded_packages’
>>>>>>>>>> Warning message:
>>>>>>>>>> In install.packages("rgdal") :
>>>>>>>>>> installation of package ‘rgdal’ had non-zero exit status
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Thomas E Adams, III
>>>>>>>>>> 1724 Sage Lane
>>>>>>>>>> Blacksburg, VA 24060
>>>>>>>>>> tea3rd using gmail.com (personal)
>>>>>>>>>> tea using terrapredictions.org (work)
>>>>>>>>>>
>>>>>>>>>> 1 (513) 739-9512 (cell)
>>>>>>>>>>
>>>>>>>>>> [[alternative HTML version deleted]]
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> R-sig-Geo mailing list
>>>>>>>>>> R-sig-Geo using r-project.org
>>>>>>>>>> https://stat.ethz.ch/mailman/listinfo/r-sig-geo
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Roger Bivand
>>>>>>> Department of Economics, Norwegian School of Economics,
>>>>>>> Helleveien 30, N-5045 Bergen, Norway.
>>>>>>> voice: +47 55 95 93 55; e-mail: Roger.Bivand using nhh.no
>>>>>>> https://orcid.org/0000-0003-2392-6140
>>>>>>> https://scholar.google.no/citations?user=AWeghB0AAAAJ&hl=en
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Roger Bivand
>>>>> Department of Economics, Norwegian School of Economics,
>>>>> Helleveien 30, N-5045 Bergen, Norway.
>>>>> voice: +47 55 95 93 55; e-mail: Roger.Bivand using nhh.no
>>>>> https://orcid.org/0000-0003-2392-6140
>>>>> https://scholar.google.no/citations?user=AWeghB0AAAAJ&hl=en
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>> --
>> Roger Bivand
>> Department of Economics, Norwegian School of Economics,
>> Helleveien 30, N-5045 Bergen, Norway.
>> voice: +47 55 95 93 55; e-mail: Roger.Bivand using nhh.no
>> https://orcid.org/0000-0003-2392-6140
>> https://scholar.google.no/citations?user=AWeghB0AAAAJ&hl=en
>
>
>
>
--
Roger Bivand
Department of Economics, Norwegian School of Economics,
Helleveien 30, N-5045 Bergen, Norway.
voice: +47 55 95 93 55; e-mail: Roger.Bivand using nhh.no
https://orcid.org/0000-0003-2392-6140
https://scholar.google.no/citations?user=AWeghB0AAAAJ&hl=en
More information about the R-sig-Geo
mailing list