[R-sig-Geo] rgdal installation problem

Robin W Hunnewell rhunne at mac.com
Tue May 3 20:45:15 CEST 2011


Yes, thank you Very much! -- that is just what I needed. For my purposes, the standard drivers for rgdal provided from CRAN will more than meet my needs.

So for the record, I did the following:

> setRepositories(ind=1:2)
> install.packages("rgdal")

And then;

> library(rgdal)
Geospatial Data Abstraction Library extensions to R successfully loaded
Loaded GDAL runtime: GDAL 1.8.0, released 2011/01/12
Path to GDAL shared files: /Users/robinhunnewell/Library/R/2.13/library/rgdal/gdal
Loaded PROJ.4 runtime: Rel. 4.7.1, 23 September 2009
Path to PROJ.4 shared files: /Users/robinhunnewell/Library/R/2.13/library/rgdal/proj

All set now.
Thanks so much, 

Robin


On 03 May, 2011,at 03:22 PM, Roger Bivand <Roger.Bivand at nhh.no> wrote:

On Tue, 3 May 2011, Robin W Hunnewell wrote:

> Thank you.  sorry if this is basic; had just hoped to find a step-by-step 
> guide for Idiots on how to install GDAL and rgdal on OSX. 
>
> I downloaded the comprehensive GDAL framework provided by William 
> Kyngesburye:
>
> http://www.kyngchaos.com/
>
> Help and 'read me' files say to install the GDAL framework with dependencies 
> first, then an rgdal binary from the same site.
> But I'm not sure how to compile and configure GDAL the right way - so that it 
> gets to the R library and can then be located.
> I'm sure it's just a basic step, but for someone new to this it's a little 
> confusing..
> Thanks very much for the URL below, will try to work it through

If you do not need drivers other than the standard ones (shapefile, 
geotiff, etc.), within R do only:

setRepositories(ind=1:2)
install.packages("rgdal")

Only use Kyngchaos if you need GDAL and the frameworks for other purposes 
other than rgdal, or if you need extra drivers for rgdal not provided as 
standard from CRAN extras.

Please report back if this meets your needs.

Roger

>
>
>
> On 03 May, 2011,at 02:21 PM, Roger Bivand <Roger.Bivand at nhh.no> wrote:
>
> On Tue, 3 May 2011, Robin W Hunnewell wrote:
>
>> Hi, 
>>
>> Could you - or any other mac users who've been successful installing rgdal 
> - 
>> elaborate how you did it? 
>
> Usually, OSX users say setRepositories(ind=1:2) to install from CRAN and 
> CRAN extras, where OSX binaries for R 2.13 are provided by Prof. Brian 
> Ripley. The direct URL is:
>
> http://www.stats.ox.ac.uk/pub/RWin/bin/macosx/leopard/contrib/2.13/
>
> This has static GDAL and standard drivers. Kyngchaos now also has an R 
> 2.13 binary, which depends on the frameworks also provided there - it was 
> added recently at user request, and provides a larger number of drivers.
>
> Roger
>
>>
>> I'm trying to install rgdal in my iMac (os X 10.6.7). I have latest Mac R 
>> app. version 2.130 
>> I downloaded the GDAL framework 1.8 and its dependencies from the kyngchaos 
>> site -- under the GDAL section of the page: 
>>
>> http://www.kyngchaos.com/software/frameworks
>>
>>
>> But not sure the that the installation has put it in the right 
> configuration, 
>> path for loading into R.
>>
>> In R, I installed and loaded library 'sp'  which rgdal needs..
>>
>> Then tried to install the GDAL package - I go to the R Package 
>> Installer, select 'Local Binary Package' from the popup, then click 
>> 'Install...'. 
>> I was able to locate and select the rgdal tarball to install and load it 
> for 
>> use in R, but get error message:
>> 1: 'tar' returned non-zero exit code 1 2: In file.rename(file.path(tmpDir, 
>> pkgname), instPath) :
>> cannot rename file 
>> '/Users/robinhunnewell/Library/R/2.13/library/file3af03e3f/GDAL' to 
>> '/Users/robinhunnewell/Library/R/2.13/library/GDAL', reason 'No such file 
> or 
>> directory'
>> 3: unable to move temporary installation 
>> '/Users/robinhunnewell/Library/R/2.13/library/file3af03e3f/GDAL' to 
>> '/Users/robinhunnewell/Library/R/2.13/library/GDAL' 
>> Is it because GDAL is not in the right place? Thanks v much if anyone can 
>> anyone help!
>> Robin
>>
>> On 02 May, 2011,at 11:23 AM, Christopher Fusting <cfusting at gmail.com> 
> wrote:
>>
>> I had a similar problem. The port under the GDAL section of this page
>> worked for me:
>>
>> http://www.kyngchaos.com/software/frameworks
>>
>> _Chris
>>
>> 2011/5/2 Ant???nio M. Rodrigues <amcrgrodrigues at gmailcom>
>>
>>> Hi,
>>> 
>>> 
>>> I'm trying to instal library rgdal in my macbook (os X 10.6.7).
>>> 
>>> 
>>> I have installed the latest R package (R-2.13.0.pkg).
>>> 
>>> 
>>> I have gdal 1.8 install. Also, I have loaded library sp which rgdal needs.
>>> 
>>> 
>>> I downloaded rdgal_06-33.tgz and using R Package installer, I located and
>>> installed the Local Binary Package.
>>> 
>>> 
>>> When trying to load rgdal ( >library(rgdal)in the R prompt) I get the
>>> error:
>>> 
>>> 
>>> -----
>>> 
>>> Error : onLoad failed in loadNamespace() for 'rgdal', details:
>>> 
>>> call: fun(..)
>>> 
>>> error:
>>> 
>>> GDAL Error 1: dlopen(/Library/Application
>>> Support/GDAL/1.8/PlugIns/gdal_GRASS.dylib, 1): Library not loaded:
>>> /Applications/GRASS-6.4app/Contents/MacOS/lib/libgrass_gis.dylib
>>> 
>>> Referenced from: /Library/Application
>>> Support/GDAL/1.8/PlugIns/gdal_GRASSdylib
>>> 
>>> Reason: image not found
>>> 
>>> 
>>> Error: package/namespace load failed for 'rgdal'
>>> 
>>> -----
>>> 
>>> 
>>> Any help will be much appreciated.
>>> 
>>> thanks,
>>> 
>>> Ant???nio
>>> 
>>> [[alternative HTML version deleted]]
>>> 
>>> 
>>> _______________________________________________
>>> R-sig-Geo mailing list
>>> R-sig-Geo at r-project.org
>>> https://stat.ethz.ch/mailman/listinfo/r-sig-geo
>>> 
>>> 
>>
>>
>>
>
>

-- 
Roger Bivand
Economic Geography Section, Department of Economics, Norwegian School of
Economics and Business Administration, Helleveien 30, N-5045 Bergen,
Norway. voice: +47 55 95 93 55; fax +47 55 95 95 43
e-mail: Roger.Bivand at nhh.no
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://stat.ethz.ch/pipermail/r-sig-geo/attachments/20110503/82b531cc/attachment.html>


More information about the R-sig-Geo mailing list