Hello all,

I'm trying to build R 32bit from source in a Windows 64 machine. I have
followed the steps in "R Installation and Adiministration" (
http://cran.r-project.org/doc/manuals/R-admin.html#Getting-the-source-files)
or at least I think I did everything described. I am not sure if I have
installed the libjpeg, libtiff and libpng files though. I have upzipped
them in the R_HOME/src/gnuwin32/bitmap folder but when I tried the
./configure command I got an error again (I'm not an expert user, still
learning).

My MkRules.local file is the following:

#-*- Makefile -*-

## This is only used when building R itself but it does customize
## etc/*/Makeconf using LOCAL_SOFT, BINPREF[64], IMPLIB and R_ARCH

## =========== configuration macros for building packages ================
# Absolute path to '/usr/local' software collection.  The versions used
# on CRAN can be found under http://www.stats.ox.ac.uk/pub/Rtools/goodies
LOCAL_SOFT =

## ============== configuration macros for building R ===================

# an alternative is to use -gstabs here, if the debugger supports only
stabs.
G_FLAG=-gdwarf-2

# Comment out if the msvcrt.dll malloc/free is required (not tested
recently)
LEA_MALLOC=YES

# Set to YES and specify the path if you want to use the ATLAS BLAS.
USE_ATLAS=NO
ATLAS_PATH=/R/ATLAS/lib/WinNT_P4SSE2

# Support for the ACML and Goto BLASes has been withdrawn: see R-admin.html

# Define to use svnversion to set SVN-REVISION (slow, and requires a clean
# checkout with no modifications).
# USE_SVNVERSION = YES

# With the recommended toolchain, set this to 32 or 64
MULTI = 32
# If the toolchain's bin directory is not in your path, set this to the path
# (including the trailing /, and use / not \).
TOOL_PATH =
# for other toolchains leave these empty and set the more detailed options
below


### BEGIN more detailed options
# Some of the toolchains have prefixes for e.g. ar, gcc.
# This can also be used to give the full path to the compiler,
# including a trailing / .
# prefix for 32-bit: path or i686-w64-mingw32-
BINPREF =
# prefix for 64-bit: path or x86_64-w64-mingw32-
BINPREF64 = x86_64-w64-mingw32-

# Others use a -m64 or -m32 option to select architectures
M_ARCH =
# and for as (--32 or --64)
AS_ARCH =
# and for windres (-F pe-i386 or pe-x86-64)
RC_ARCH =
# and for dlltool ("-m i386 --as-flags --32" vs "-m i386:x86-64 --as-flags
--64")
DT_ARCH =

# 32- or 64-bit Windows?
WIN = 64

# We normally link directly against DLLs,
# but this macro forces the use of import libs
# Has been needed for some versions of MinGW-w64
# USE_IMPLIBS = YES

### END more detailed options


# set to use ICU (experimental)
# USE_ICU=YES
# path to parent of ICU headers
ICU_PATH=/sources/icu

# optional overrides for making bitmapdll: names of source directories
JPEGDIR = jpeg-8d
PNGDIR = libpng
TIFFDIR = libtiff

# For the cairographics devices
# Optionally use a static build of cairographics from
#   http://www.rforge.net/Cairo/files/cairo-current-win.tar.gz
# and set CAIRO_HOME to the parent of the win32/win64 directories
#
# If CAIRO_HOME is not set the devices are not built.
CAIRO_HOME =

# set this to YES to build static HTML help
BUILD_HTML = NO

# unset this if you are *not* using MiKTeX
MIKTEX = TRUE

# additional optimization flags
EOPTS=-mtune=core2

# define to -fopenmp if the toolchain has OpenMP support
OPENMP = -fopenmp

# define to -pthread if the toolchain has pthreads support
PTHREAD = -pthread

## ====== configuration macros for building installer ===========

# location where Inno Setup 5.[34].x was installed. Spaces allowed.
ISDIR=E:/dev/Inno

# optional location where qpdf was installed (in $(QPDF)/bin). Spaces
allowed.
QPDF= E:/dev/qpdf/qpdf-3.0.2/

# home of 32-bit files for combined installer on 64-bit build
HOME32=

# Full paths of extra DLLs that need to be shipped
# e.g
# DLLs32 = c:/R/bin/pthreadGC2-w32.dll
# DLLs64 = c:/R/bin64/pthreadGC2-w64.dll
DLLs32 =
DLLs64 =

## ====== configuration macros for building MSI installer ===========

# location where WiX 3.x executables were installed. Spaces allowed.
# The MSI uses '/bin': other packagings may not
WIX3DIR=C:/packages/WiX3.5/bin

# set to 1 for a non-elevated per-user installer
WIX_PERSONAL=0

## =============== end of user-customizable parts  ===================


My environment variables are the following:
PATH
E:\dev\Rtools\bin;E:\dev\Rtools\gcc-4.6.3\bin;E:\dev\MiKTex\miktex\bin\;E:\dev\R-2.15.2\bin\i386;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program
Files\Microsoft Windows Performance Toolkit\;C:\Program Files\MATLAB\MATLAB
Compiler Runtime\v714\runtime\win64;C:\Program Files\MATLAB\MATLAB Compiler
Runtime\v715\runtime\win64;C:\Program
Files\TortoiseSVN\bin;C:\Windows\System32\jom;C:\strawberry\perl\bin;C:\strawberry\perl\lib;C:\strawberry\c\bin\;E:\dev\Qt-4.8.1\bin;E:\Qt_x86\qt-everywhere-opensource-src-4.8.1\bin;E:\qwt-6.0.1\lib;C:\Program
Files (x86)\QuickTime\QTSystem\;

R_HOME
E:\dev\R-2.15.2

TMPDIR
E:/dev/tmp

--------------------------------------

I get the following error:


E:\dev\R-2.15.2\src\gnuwin32>make all recommended
make[1]: `MkRules' is up to date.
make[4]: Nothing to be done for `svnonly'.
installing C headers
make[2]: Nothing to be done for `all'.
make[2]: `libRblas.dll.a' is up to date.
make[5]: Nothing to be done for `svnonly'.
installing C headers
make --no-print-directory -C ../extra/intl CFLAGS='-O3 -Wall -pedantic
-mtune=core2' -f Makefile.win
make --no-print-directory -C ../appl CFLAGS='-O3 -Wall -pedantic
-mtune=core2' FFLAGS='-O3 -mtune=core2' -f Makefile.win
make --no-print-directory -C ../nmath CFLAGS='-O3 -Wall -pedantic
-mtune=core2'FFLAGS='-O3 -mtune=core2' -f Makefile.win
make --no-print-directory -C ../main CFLAGS='-O3 -Wall -pedantic
-mtune=core2' FFLAGS='-O3 -mtune=core2' malloc-DEFS='-DLEA_MALLOC' -f
Makefile.win
make --no-print-directory -C ./getline CFLAGS='-O3 -Wall -pedantic
-mtune=core2'

make[4]: `gl.a' is up to date.
make -f Makefile.win makeMakedeps
make -f Makefile.win libpcre.a
make[5]: `libpcre.a' is up to date.
make[4]: Nothing to be done for `all'.
make -f Makefile.win makeMakedeps
make -f Makefile.win libtre.a
make[5]: `libtre.a' is up to date.
make[4]: Nothing to be done for `all'.
make[5]: `stamp' is up to date.
make[5]: `liblzma.a' is up to date.
gcc -std=gnu99 -m32 -shared -s -mwindows -o R.dll R.def console.o
dataentry.o dynload.o edit.o editor.o embeddedR.o extra.o opt.o pager.o
preferences.o psignal.o rhome.o rt_complete.o rui.o run.o shext.o
sys-win32.o system.o dos_wglob.o e_pow.o malloc.o ../main/libmain.a
../appl/libappl.a ../nmath/libnmath.a getline/gl.a ../extra/xdr/libxdr.a
../extra/pcre/libpcre.a ../extra/bzip2/libbz2.a ../extra/intl/libintl.a
../extra/trio/libtrio.a ../extra/tzone/libtz.a ../extra/tre/libtre.a
../extra/xz/liblzma.a dllversion.o -fopenmp -L. -lgfortran -lRblas
-L../../bin/i386 -lRzlib -lRgraphapp -lRiconv -lcomctl32 -lversion
e:/dev/rtools/gcc-4.6.3/bin/../lib/gcc/i686-w64-mingw32/4.6.3/../../../../i686-w64-mingw32/bin/ld.exe:
cannot find -lRzlib
e:/dev/rtools/gcc-4.6.3/bin/../lib/gcc/i686-w64-mingw32/4.6.3/../../../../i686-w64-mingw32/bin/ld.exe:
cannot find -lRgraphapp
e:/dev/rtools/gcc-4.6.3/bin/../lib/gcc/i686-w64-mingw32/4.6.3/../../../../i686-w64-mingw32/bin/ld.exe:
cannot find -lRiconv
collect2: ld returned 1 exit status
make[3]: *** [R.dll] Error 1
make[2]: *** [../../bin/i386/R.dll] Error 2
make[1]: *** [rbuild] Error 2
make: *** [all] Error 2


I can find the Rgraphapp.dll, Rzlib.dll, Riconv.dll in the
E:\dev\R-2.15.2\bin\i386
Also when I type where gcc I get:
E:\dev\Rtools\gcc-4.6.3\bin\gcc.exe
C:\strawberry\c\bin\gcc.exe

I cannot understand what I'm doing wrong. I'm sorry if this question has
been asked before but I couldn't find anything useful.

I would appreciate any help. Thank you!

Laura

	[[alternative HTML version deleted]]

