[R] Problem when trying to install packages

[Bert Gunter]

Though Navigator may mess up any Rtools stuff because it handles the
directory trees where packages and dependencies are located, does it not?
If so, maybe just reinstall RStudio directly from its website to proceed.
Just a guess obviously.

Bert

On Sat, Mar 16, 2024, 05:09 javad bayat <j.bayat194 using gmail.com> wrote:

>  Dear Rui;
> Many thanks for your reply. I have installed Rtools (rtools43-5958-5975) on
> my PC and I have R version 4.3.3 and 4.3.2 to install. Also I have
> installed Rstudio through Anaconda Navigator.
> But I do not know how to use Rtools for installing the R packages. I would
> be more than happy if you help me.
> Sincerely yours
>
>
>
> > Dear Rui;
> > I hope this email finds you well. I have a problem installing packages in
> > Rstudio and R software. When I try to install a package, the software
> tries
> > to download but after downloading, it gives some errors and does not
> work.
> > I would be more than happy if you please help me to solve this issue.
> > Warm regards.
> >
> >
> >> install.packages("openair", type = "source")Installing package into
> ‘C:/R_Libs’
> > (as ‘lib’ is unspecified)Warning in install.packages :
> >    dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
> > dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
> > ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
> > ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
> > ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
> > trying URL '
> https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
> > type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
> > type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
> > type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
> > type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
> > type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
> > type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
> > type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
> > type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
> > type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
> > type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
> > type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
> > type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
> > type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
> > type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
> > type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
> > type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
> > type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
> > type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
> > type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
> > type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
> > type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
> > type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
> > type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
> > type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
> > type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
> > type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
> Hello,
>
> If you are on Windows, do you have rtools [1] installed?
>
>
>
>
> On Thu, Mar 14, 2024 at 6:47 PM Rui Barradas <ruipbarradas using sapo.pt> wrote:
>
> > Às 04:12 de 13/03/2024, javad bayat escreveu:
> > > Dear Rui;
> > > I hope this email finds you well. I have a problem installing packages
> in
> > > Rstudio and R software. When I try to install a package, the software
> > tries
> > > to download but after downloading, it gives some errors and does not
> > work.
> > > I would be more than happy if you please help me to solve this issue.
> > > Warm regards.
> > >
> > >
> > >> install.packages("openair", type = "source")Installing package into
> > ‘C:/R_Libs’
> > > (as ‘lib’ is unspecified)Warning in install.packages :
> > >    dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
> > > dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
> > > ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
> > > ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
> > > ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
> > > type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
> > > type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
> > > type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
> > > type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
> > > type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
> > > type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
> > > type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
> > > type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
> > > type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
> > > type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
> > > type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
> > > type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
> > > type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
> > > type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
> > > type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
> > > type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
> > > type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
> > > type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
> > > type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
> > > type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
> > > type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
> > > type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
> > > type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
> > > type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
> > > type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
> > > type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
> > > MB
> > > * installing *source* package 'deldir' ...
> > > ** package 'deldir' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'deldir'
> > > * removing 'C:/R_Libs/deldir'
> > > Warning in install.packages :
> > >    installation of package ‘deldir’ had non-zero exit status
> > > * installing *source* package 'RcppEigen' ...
> > > ** package 'RcppEigen' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'RcppEigen'
> > > * removing 'C:/R_Libs/RcppEigen'
> > > Warning in install.packages :
> > >    installation of package ‘RcppEigen’ had non-zero exit status
> > > * installing *source* package 'cli' ...
> > > ** package 'cli' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'cli'
> > > * removing 'C:/R_Libs/cli'
> > > Warning in install.packages :
> > >    installation of package ‘cli’ had non-zero exit status
> > > * installing *source* package 'glue' ...
> > > ** package 'glue' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'glue'
> > > * removing 'C:/R_Libs/glue'
> > > Warning in install.packages :
> > >    installation of package ‘glue’ had non-zero exit status
> > > * installing *source* package 'rlang' ...
> > > ** package 'rlang' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'rlang'
> > > * removing 'C:/R_Libs/rlang'
> > > Warning in install.packages :
> > >    installation of package ‘rlang’ had non-zero exit status
> > > * installing *source* package 'png' ...
> > > ** package 'png' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > bash.exe: warning: could not find /tmp, please create!
> > >    checking PNG headers and libraries
> > > bash.exe: warning: could not find /tmp, please create!
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
> > > make: command not found
> > > ./configure.win: line 17: make: command not found
> > > /lib/libpng.lib
> > >    found libpng in LOCAL_SOFT: /lib
> > >    seems ok, ready to go
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'png'
> > > * removing 'C:/R_Libs/png'
> > > Warning in install.packages :
> > >    installation of package ‘png’ had non-zero exit status
> > > * installing *source* package 'jpeg' ...
> > > ** package 'jpeg' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > bash.exe: warning: could not find /tmp, please create!
> > >    checking JPEG headers and libraries
> > > bash.exe: warning: could not find /tmp, please create!
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
> > > make: command not found
> > > ./configure.win: line 17: make: command not found
> > > /lib/libjpeg.lib
> > >    found libjpeg in LOCAL_SOFT: /lib
> > >    seems ok, ready to go
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'jpeg'
> > > * removing 'C:/R_Libs/jpeg'
> > > Warning in install.packages :
> > >    installation of package ‘jpeg’ had non-zero exit status
> > > * installing *source* package 'timechange' ...
> > > ** package 'timechange' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'timechange'
> > > * removing 'C:/R_Libs/timechange'
> > > Warning in install.packages :
> > >    installation of package ‘timechange’ had non-zero exit status
> > > * installing *source* package 'maps' ...
> > > ** package 'maps' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > >
> > >     **********************************************
> > >     WARNING: this package has a configure script
> > >           It probably needs manual configuration
> > >     **********************************************
> > >
> > >
> > > ** libs
> > >    running 'src/Makefile.win' ...
> > > Warning in system(paste("make --no-print-directory", paste("-f",
> > > shQuote(makefiles),  :
> > >    'make' not found
> > > ERROR: compilation failed for package 'maps'
> > > * removing 'C:/R_Libs/maps'
> > > Warning in install.packages :
> > >    installation of package ‘maps’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'nlme'
> > > * removing 'C:/R_Libs/nlme'
> > > Warning in install.packages :
> > >    installation of package ‘nlme’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'Matrix'
> > > * removing 'C:/R_Libs/Matrix'
> > > Warning in install.packages :
> > >    installation of package ‘Matrix’ had non-zero exit status
> > > * installing *source* package 'cluster' ...
> > > ** package 'cluster' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'cluster'
> > > * removing 'C:/R_Libs/cluster'
> > > Warning in install.packages :
> > >    installation of package ‘cluster’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'hexbin'
> > > * removing 'C:/R_Libs/hexbin'
> > > Warning in install.packages :
> > >    installation of package ‘hexbin’ had non-zero exit status
> > > * installing *source* package 'lifecycle' ...
> > > ** package 'lifecycle' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** R
> > > ** inst
> > > ** byte-compile and prepare package for lazy loading
> > > Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck =
> > vI[[i]]) :
> > >    namespace 'rlang' 0.3.4 is being loaded, but >= 1.1.0 is required
> > > Calls: <Anonymous> ... withCallingHandlers -> loadNamespace ->
> > > namespaceImport -> loadNamespace
> > > Execution halted
> > > ERROR: lazy loading failed for package 'lifecycle'
> > > * removing 'C:/R_Libs/lifecycle'
> > > Warning in install.packages :
> > >    installation of package ‘lifecycle’ had non-zero exit status
> > > ERROR: dependencies 'deldir', 'RcppEigen' are not available for package
> > 'interp'
> > > * removing 'C:/R_Libs/interp'
> > > Warning in install.packages :
> > >    installation of package ‘interp’ had non-zero exit status
> > > ERROR: dependency 'timechange' is not available for package 'lubridate'
> > > * removing 'C:/R_Libs/lubridate'
> > > Warning in install.packages :
> > >    installation of package ‘lubridate’ had non-zero exit status
> > > ERROR: dependency 'maps' is not available for package 'mapproj'
> > > * removing 'C:/R_Libs/mapproj'
> > > Warning in install.packages :
> > >    installation of package ‘mapproj’ had non-zero exit status
> > > ERROR: dependencies 'nlme', 'Matrix' are not available for package
> 'mgcv'
> > > * removing 'C:/R_Libs/mgcv'
> > > Warning in install.packages :
> > >    installation of package ‘mgcv’ had non-zero exit status
> > > ERROR: dependency 'lifecycle' is not available for package 'vctrs'
> > > * removing 'C:/R_Libs/vctrs'
> > > Warning in install.packages :
> > >    installation of package ‘vctrs’ had non-zero exit status
> > > ERROR: dependencies 'lattice', 'png', 'jpeg', 'interp', 'MASS' are not
> > > available for package 'latticeExtra'
> > > * removing 'C:/R_Libs/latticeExtra'
> > > Warning in install.packages :
> > >    installation of package ‘latticeExtra’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > 'pillar'
> > > * removing 'C:/R_Libs/pillar'
> > > Warning in install.packages :
> > >    installation of package ‘pillar’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > > 'tidyselect'
> > > * removing 'C:/R_Libs/tidyselect'
> > > Warning in install.packages :
> > >    installation of package ‘tidyselect’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > 'purrr'
> > > * removing 'C:/R_Libs/purrr'
> > > Warning in install.packages :
> > >    installation of package ‘purrr’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
> > > for package 'tibble'
> > > * removing 'C:/R_Libs/tibble'
> > > Warning in install.packages :
> > >    installation of package ‘tibble’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
> > > for package 'dplyr'
> > > * removing 'C:/R_Libs/dplyr'
> > > Warning in install.packages :
> > >    installation of package ‘dplyr’ had non-zero exit status
> > > ERROR: dependencies 'cluster', 'hexbin', 'lattice', 'latticeExtra',
> > > 'lubridate', 'mapproj', 'MASS', 'mgcv' are not available for package
> > > 'openair'
> > > * removing 'C:/R_Libs/openair'
> > > Warning in install.packages :
> > >    installation of package ‘openair’ had non-zero exit status
> > >
> > >
> > >
> > Hello,
> >
> > If you are on Windows, do you have rtools [1] installed?
> > Also, please address your question to R-Help [2], [3], not to me
> directly.
> >
> >
> > [1] https://cran.r-project.org/bin/windows/Rtools/
> > [2] r-help using r-project.org
> > [3] https://stat.ethz.ch/mailman/listinfo/r-help
> >
> > Hope this helps,
> >
> > Rui Barradas
> >
> >
> > --
> > Este e-mail foi analisado pelo software antivírus AVG para verificar a
> > presença de vírus.
> > www.avg.com
> >
>
>
> --
> Best Regards
> Javad Bayat
> M.Sc. Environment Engineering
> Alternative Mail: bayat194 using yahoo.com
>
>         [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>

	[[alternative HTML version deleted]]