[R] Complicated analysis for huge databases
Allaisone 1
allaisone1 at hotmail.com
Sun Nov 19 01:15:45 CET 2017
Thanks but a new error appeared with the loop :
Error in x + 1 : non-numeric argument to binary operator
I think this can be solved by converting columns (I,II,II,..600) into "numeric" instead of
the current "int" type as shown below in the structure of "33_55" dataframe .
$ 33_55:'data.frame': 256 obs. of 600 variables:
..$ MealsCombinations : chr [1:256] "33_55" "33_55" ....
..$ ID : num [1:256] 1 3 5 ...
..$ I : int [1:256] 1 1 2 1 1 2 1 2 1 1 ...
..$ II : int [1:256] 2 1 2 2 1 2 2 2 2 2 ...
..$ III : int [1:256] 1 1 2 1 1 2 1 2 1 1 ...
..$ IV : int [1:256] 2 2 2 2 2 2 2 2 2 2 ...
any suggestions to solve this issue rather than unlisting the list as this will affect
the current shape of data (i.e. being separated dataframes). I need to find maf for each column(I,II,III..600) under this dataframe (33_55) and the rest of dataframes.
________________________________
From: Duncan Murdoch <murdoch.duncan at gmail.com>
Sent: 18 November 2017 23:15:15
To: Allaisone 1; David Winsemius
Cc: R-help
Subject: Re: [R] Complicated analysis for huge databases
On 18/11/2017 4:40 PM, Allaisone 1 wrote:
>
> The loop :
>
>
> AllMAFs <- list()
>
> for (i in length(SeparatedGroupsofmealsCombs) {
> AllMAFs[[i]] <- apply( SeparatedGroupsofmealsCombs[[i]], 2, function(x)maf( tabulate( x+1) ))
> }
>
>
> gives these errors (I tried this many times and I'm sure I copied it entirely) :-
>
> Error in apply(SeparatedGroupsofmealsCombs[[i]], 2, function(x) maf(tabulate(x + :
> object 'i' not found
>> }
> Error: unexpected '}' in " }"
The first line of the for loop is short by one ")". You should have
seen this error after the first line:
Error: unexpected '{' in " for (i in length(SeparatedGroupsofmealsCombs) {"
Once that line is thrown away, the message about i makes sense:
AllMAFs[[i]] <- apply( SeparatedGroupsofmealsCombs[[i]], 2,
function(x)maf( tabulate( x+1) ))
refers to a variable "i" that has never been defined.
Duncan Murdoch
>
>
> The lapply function :
> results<-lapply(SeparatedGroupsofmealsCombs , function(x)maf(tabulate(x+1)))
> gives this error :-
> Error in FUN(left, right) : non-numeric argument to binary operator
>
> I have been trying since yesterday but but until now I'm not able to identify
> the correct syntax
>
>
>
>
> ________________________________
> From: David Winsemius <dwinsemius at comcast.net>
> Sent: 18 November 2017 20:06:56
> To: Allaisone 1
> Cc: Boris Steipe; R-help
> Subject: Re: [R] Complicated analysis for huge databases
>
>
>> On Nov 18, 2017, at 1:52 AM, Allaisone 1 <allaisone1 at hotmail.com> wrote:
>>
>> Although the loop seems to be formulated correctly I wonder why
>> it gives me these errors :
>>
>> -object 'i' not found
>> - unexpected '}' in "}"
>
> You probably did not copy the entire code offered. But we cannot know since you did not "show your code", not=r did you post complete error messages. Both of these practices are strongly recommended by the Posting Guide. Please read it (again?).
>
> --
> David.
>>
>>
>> the desired output is expected to be very large as for each dataframe in the list of dataframes I expect to see maf value for each of the 600 columns! and this is only for
>>
>> for one dataframe in the list .. I have around 150-200 dataframes.. not sure how R will store these results.. but first I need the analysis to be done correctly. The final output has to be something like this :-
>>
>>
>>> mafsforeachcolumns(I,II,...600)foreachcombination
>>
>> MealsCombinations Cust.ID I II III IV ...... 600
>> 1 33-55 1 0.124 0.10 0.65 0.467
>> 3
>> 5
>>
>> 2 44-66 7 0.134 0.43 0.64 0.479
>> 4
>> 9
>>
>> .
>>
>> .
>>
>> ~180 dataframes
>>
>>
>> ________________________________
>> From: Boris Steipe <boris.steipe at utoronto.ca>
>> Sent: 18 November 2017 00:35:16
>> To: Allaisone 1; R-help
>> Subject: Re: [R] Complicated analysis for huge databases
>>
>> Something like the following?
>>
>> AllMAFs <- list()
>>
>> for (i in length(SeparatedGroupsofmealsCombs) {
>> AllMAFs[[i]] <- apply( SeparatedGroupsofmealsCombs[[i]], 2, function(x)maf( tabulate( x+1) ))
>> }
>>
>>
>> (untested, of course)
>> Also the solution is a bit generic since I don't know what the output of maf() looks like in your case, and I don't understand why you use tabulate because I would have assumed that's what maf() does - but that's not for me to worry about :-)
>>
>>
>>
>> B.
>>
>>
>>
>>> On Nov 17, 2017, at 7:15 PM, Allaisone 1 <allaisone1 at hotmail.com> wrote:
>>>
>>>
>>> Thanks Boris , this was very helpful but I'm struggling with the last part.
>>>
>>> 1) I combined the first 2 columns :-
>>>
>>>
>>> library(tidyr)
>>> SingleMealsCode <-unite(MyData, MealsCombinations, c(MealA, MealB), remove=FALSE)
>>> SingleMealsCode <- SingleMealsCode[,-2]
>>>
>>> 2) I separated this dataframe into different dataframes based on "MealsCombination"
>>> column so R will recognize each meal combination separately :
>>>
>>> SeparatedGroupsofmealsCombs <- split(SingleMealCode,SingleMealCode$MealsCombinations)
>>>
>>> after investigating the structure of "SeparatedGroupsofmealsCombs" , I can see
>>> a list of different databases, each of which represents a different Meal combinations which is great.
>>>
>>> No, I'm struggling with the last part, how can I run the maf code for all dataframes?
>>>
>>> when I run this code as before :-
>>>
>>> maf <- apply(SeparatedGroupsofmealsCombs, 2, function(x)maf(tabulate(x+1)))
>>>
>>> an error message says : dim(X) must have a positive length . I'm not sure which length
>>> I need to specify.. any suggestions to correct this syntax ?
>>>
>>> Regards
>>> Allaisone
>>> From: Boris Steipe <boris.steipe at utoronto.ca>
>>> Sent: 17 November 2017 21:12:06
>>> To: Allaisone 1
>>> Cc: R-help
>>> Subject: Re: [R] Complicated analysis for huge databases
>>>
>>> Combine columns 1 and 2 into a column with a single ID like "33.55", "44.66" and use split() on these IDs to break up your dataset. Iterate over the list of data frames split() returns.
>>>
>>>
>>> B.
>>>
>>>> On Nov 17, 2017, at 12:59 PM, Allaisone 1 <allaisone1 at hotmail.com> wrote:
>>>>
>>>>
>>>> Hi all ..,
>>>>
>>>>
>>>> I have a large dataset of around 600,000 rows and 600 columns. The first col is codes for Meal A, the second columns is codes for Meal B. The third column is customers IDs where each customer had a combination of meals. Each column of the rest columns contains values 0,1,or 2. The dataset is organised in a way so that the first group of customers had similar meals combinations, this is followed by another group of customers with similar meals combinations but different from the first group and so on. The dataset looks like this :-
>>>>
>>>>
>>>>> MyData
>>>>
>>>> Meal A Meal B Cust.ID I II III IV ...... 600
>>>>
>>>> 1 33 55 1 0 1 2 0
>>>>
>>>> 2 33 55 3 1 0 2 2
>>>>
>>>> 3 33 55 5 2 1 1 2
>>>>
>>>> 4 44 66 7 0 2 2 2
>>>>
>>>> 5 44 66 4 1 1 0 1
>>>>
>>>> 6 44 66 9 2 0 1 2
>>>>
>>>> .
>>>>
>>>> .
>>>>
>>>> 600,000
>>>>
>>>>
>>>>
>>>> I wanted to find maf() for each column(from 4 to 600) after calculating the frequency of the 3 values (0,1,2) but this should be done group by group (i.e. group(33-55) : rows 1:3 then group(44-66) :rows 4:6 and so on).
>>>>
>>>>
>>>> I can do the analysis for the entire column but not group by group like this :
>>>>
>>>>
>>>> MAF <- apply(MyData[,4:600], 2, function(x)maf(tabulate(x+1)))
>>>>
>>>> How can I modify this code to tell R to do the analysis group by group for each column so I get maf value for 33-55 group of clolumn I, then maf value for group 44-66 in the same column I,then the rest of groups in this column and do the same for the remaining columns.
>>>>
>>>> In fact, I'm interested in doing this analysis for only 300 columns but all of the 600 columns.
>>>> I have another sheet contains names of columns of interest like this :
>>>>
>>>>> ColOfinterest
>>>>
>>>> Col
>>>> I
>>>> IV
>>>> V
>>>> .
>>>> .
>>>> 300
>>>>
>>>> Any one would help with the best combination of syntax to perform this complex analysis?
>>>>
>>>> Regards
>>>> Allaisone
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> [[alternative HTML version deleted]]
>>>>
>>>> ______________________________________________
>>>> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
>>>> https://stat.ethz.ch/mailman/listinfo/r-help
>>>> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
>>>> and provide commented, minimal, self-contained, reproducible code.
>>
>>
>> [[alternative HTML version deleted]]
>>
>> ______________________________________________
>> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
> David Winsemius
> Alameda, CA, USA
>
> 'Any technology distinguishable from magic is insufficiently advanced.' -Gehm's Corollary to Clarke's Third Law
>
>
>
>
>
>
> [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
[[alternative HTML version deleted]]
More information about the R-help
mailing list