[R] SPlus script

Scott Raynaud scott.raynaud at yahoo.com
Thu Jun 6 13:24:37 CEST 2013


Ok. I tried copying the original program, changing all _ to <- and running in 3.0.1.  Still no error 
message or output.  It's a mystery to me.

----- Original Message -----
From: William Dunlap <wdunlap at tibco.com>
To: Scott Raynaud <scott.raynaud at yahoo.com>; "r-help at r-project.org" <r-help at r-project.org>
Cc: 
Sent: Wednesday, June 5, 2013 2:17 PM
Subject: RE: [R] SPlus script

Both the R and S+ versions (which seem to differ only in the use of _ for assignment
in the S+ version) do nothing but define some functions.  You would not expect any
printed output unless you used those functions on some data.  Is there another script
that does that?

Bill Dunlap
Spotfire, TIBCO Software
wdunlap tibco.com


> -----Original Message-----
> From: r-help-bounces at r-project.org [mailto:r-help-bounces at r-project.org] On Behalf
> Of Scott Raynaud
> Sent: Wednesday, June 05, 2013 6:21 AM
> To: r-help at r-project.org
> Subject: [R] SPlus script
> 
> This originally was an SPlus script that I modifeid about a year-and-a-half ago.  It worked
> perfectly then.  Now I can't get any output despite not receiving an error message.  I'm
> providing the SPLUS script as a reference.  I'm running R15.2.2.  Any help appreciated.
> 
> ************************************MY
> MODIFICATION***********************************************************
> **********
> ## sshc.ssc: sample size calculation for historical control studies
> ## J. Jack Lee (jjlee at mdanderson.org) and Chi-hong Tseng
> ## Department of Biostatistics, Univ. of Texas M.D. Anderson Cancer Center
> ##
> ## 3/1/99
> ## updated 6/7/00: add loess
> ##------------------------------------------------------------------
> ######## Required Input:
> #
> # rc     number of response in historical control group
> # nc     sample size in historical control
> # d      target improvement = Pe - Pc
> # method 1=method based on the randomized design
> #        2=Makuch & Simon method (Makuch RW, Simon RM. Sample size considerations
> #          for non-randomized comparative studies. J of Chron Dis 1980; 3:175-181.
> #        3=uniform power method
> ######## optional Input:
> #
> # alpha  size of the test
> # power  desired power of the test
> # tol    convergence criterion for methods 1 & 2 in terms of sample size
> # tol1   convergence criterion for method 3 at any given obs Rc in terms of difference
> #          of expected power from target
> # tol2   overall convergence criterion for method 3 as the max absolute deviation
> #          of expected power from target for all Rc
> # cc     range of multiplicative constant applied to the initial values ne
> # l.span smoothing constant for loess
> #
> # Note:  rc is required for methods 1 and 2 but not 3
> #        method 3 return the sample size need for rc=0 to (1-d)*nc
> #
> ######## Output
> # for methdos 1 & 2: return the sample size needed for the experimental group (1
> number)
> #                    for given rc, nc, d, alpha, and power
> # for method 3:      return the profile of sample size needed for given nc, d, alpha, and
> power
> #                    vector $ne contains the sample size corresponding to rc=0, 1, 2, ... nc*(1-d)
> #                    vector $Ep contains the expected power corresponding to
> #                      the true pc = (0, 1, 2, ..., nc*(1-d)) / nc
> #
> #------------------------------------------------------------------
> sshc<-function(rc, nc=1092, d=.085779816, method=3, alpha=0.05, power=0.8,
>               tol=0.01, tol1=.0001, tol2=.005, cc=c(.1,2), l.span=.5)
> {
> ### for method 1
> if (method==1) {
>  ne1<-ss.rand(rc,nc,d,alpha=.05,power=.8,tol=.01)
>  return(ne=ne1)
>                }
> ### for method 2
> if (method==2) {
> ne<-nc
> ne1<-nc+50
> while(abs(ne-ne1)>tol & ne1<100000){
> ne<-ne1
> pe<-d+rc/nc
> ne1<-nef(rc,nc,pe*ne,ne,alpha,power)
> ## if(is.na(ne1)) print(paste('rc=',rc,',nc=',nc,',pe=',pe,',ne=',ne))
> }
> if (ne1>100000) return(NA)
> else return(ne=ne1)
> }
> ### for method 3
> if (method==3) {
> if (tol1 > tol2/10) tol1<-tol2/10
> ncstar<-(1-d)*nc
> pc<-(0:ncstar)/nc
> ne<-rep(NA,ncstar + 1)
> for (i in (0:ncstar))
> { ne[i+1]<-ss.rand(i,nc,d,alpha=.05,power=.8,tol=.01)
> }
> plot(pc,ne,type='l',ylim=c(0,max(ne)*1.5))
> ans<-c.searchd(nc, d, ne, alpha, power, cc, tol1)
> ### check overall absolute deviance
> old.abs.dev<-sum(abs(ans$Ep-power))
> ##bad<-0
> print(round(ans$Ep,4))
> print(round(ans$ne,2))
> lines(pc,ans$ne,lty=1,col=8)
> old.ne<-ans$ne
> ##while(max(abs(ans$Ep-power))>tol2 & bad==0){  #### unnecessary ##
> while(max(abs(ans$Ep-power))>tol2){
> ans<-c.searchd(nc, d, ans$ne, alpha, power, cc, tol1)
> abs.dev<-sum(abs(ans$Ep-power))
> print(paste(" old.abs.dev=",old.abs.dev))
> print(paste("     abs.dev=",abs.dev))
> ##if (abs.dev > old.abs.dev) { bad<-1}
> old.abs.dev<-abs.dev
> print(round(ans$Ep,4))
> print(round(ans$ne,2))
> lines(pc,old.ne,lty=1,col=1)
> lines(pc,ans$ne,lty=1,col=8)
> ### add convex
> ans$ne<-convex(pc,ans$ne)$wy
> ### add loess
> ###old.ne<-ans$ne
> loess.ne<-loess(ans$ne ~ pc, span=l.span)
> lines(pc,loess.ne$fit,lty=1,col=4)
> old.ne<-loess.ne$fit
> ###readline()
> }
> return(list(ne=ans$ne, Ep=ans$Ep))
>                }
> }
> ## needed for method 1
> nef2<-function(rc,nc,re,ne,alpha,power){
> za<-qnorm(1-alpha)
> zb<-qnorm(power)
> xe<-asin(sqrt((re+0.375)/(ne+0.75)))
> xc<-asin(sqrt((rc+0.375)/(nc+0.75)))
> ans<- 1/(4*(xc-xe)^2/(za+zb)^2-1/(nc+0.5)) - 0.5
> return(ans)
> }
> ## needed for method 2
> nef<-function(rc,nc,re,ne,alpha,power){
> za<-qnorm(1-alpha)
> zb<-qnorm(power)
> xe<-asin(sqrt((re+0.375)/(ne+0.75)))
> xc<-asin(sqrt((rc+0.375)/(nc+0.75)))
> ans<-(za*sqrt(1+(ne+0.5)/(nc+0.5))+zb)^2/(2*(xe-xc))^2-0.5
> return(ans)
> }
> ## needed for method 3
> c.searchd<-function(nc, d, ne, alpha=0.05, power=0.8, cc=c(0.1,2),tol1=0.0001){
> #---------------------------
> # nc     sample size of control group
> # d      the differece to detect between control and experiment
> # ne     vector of starting sample size of experiment group
> #      corresonding to rc of 0 to nc*(1-d)
> # alpha  size of test
> # power  target power
> # cc   pre-screen vector of constant c, the range should cover the
> #      the value of cc that has expected power
> # tol1   the allowance between the expceted power and target power
> #---------------------------
> pc<-(0:((1-d)*nc))/nc
> ncl<-length(pc)
> ne.old<-ne
> ne.old1<-ne.old
> ### sweeping forward
> for(i in 1:ncl){
>  cmin<-cc[1]
>  cmax<-cc[2]
> ### fixed cci<-cmax bug
>  cci <-1
>  lhood<-dbinom((i:ncl)-1,nc,pc[i])
>  ne[i:ncl]<-(1+(cci-1)*(lhood/lhood[1])) * ne.old1[i:ncl]
>  Ep0 <-Epower(nc, d, ne, pc, alpha)
>  while(abs(Ep0[i]-power)>tol1){
>   if(Ep0[i]<power) cmin<-cci
>   else cmax<-cci
>   cci<-(cmax+cmin)/2
>   ne[i:ncl]<-(1+(cci-1)*(lhood/lhood[1])) * ne.old1[i:ncl]
>   Ep0<-Epower(nc, d, ne, pc, alpha)
>  }
>   ne.old1<-ne
> }
> ne1<-ne
> ### sweeping backward -- ncl:i
> ne.old2<-ne.old
> ne     <-ne.old
> for(i in ncl:1){
>  cmin<-cc[1]
>  cmax<-cc[2]
> ### fixed cci<-cmax bug
>  cci <-1
>  lhood<-dbinom((ncl:i)-1,nc,pc[i])
>  lenl <-length(lhood)
>  ne[ncl:i]<-(1+(cci-1)*(lhood/lhood[lenl]))*ne.old2[ncl:i]
>  Ep0 <-Epower(nc, d, cci*ne, pc, alpha)
>  while(abs(Ep0[i]-power)>tol1){
>   if(Ep0[i]<power) cmin<-cci
>   else cmax<-cci
>   cci<-(cmax+cmin)/2
>   ne[ncl:i]<-(1+(cci-1)*(lhood/lhood[lenl]))*ne.old2[ncl:i]
>   Ep0<-Epower(nc, d, ne, pc, alpha)
>  }
>   ne.old2<-ne
> }
> ne2<-ne
> ne<-(ne1+ne2)/2
> #cat(ccc*ne)
> Ep1<-Epower(nc, d, ne, pc, alpha)
> return(list(ne=ne, Ep=Ep1))
> }
> ###
> vertex<-function(x,y)
> {  n<-length(x)
>  vx<-x[1]
>  vy<-y[1]
>  vp<-1
>  up<-T
>  for (i in (2:n))
>  { if (up)
>   {  if (y[i-1] > y[i])
>    {vx<-c(vx,x[i-1])
>     vy<-c(vy,y[i-1])
>     vp<-c(vp,i-1)
>     up<-F
>    }
>   }
>   else
>   {  if (y[i-1] < y[i]) up<-T
>   }
>  }
>  vx<-c(vx,x[n])
>  vy<-c(vy,y[n])
>  vp<-c(vp,n)
>  return(list(vx=vx,vy=vy,vp=vp))
> }
> ###
> convex<-function(x,y)
> {
>  n<-length(x)
>  ans<-vertex(x,y)
>  len<-length(ans$vx)
>  while (len>3)
>  {
> #  cat("x=",x,"\n")
> #  cat("y=",y,"\n")
>   newx<-x[1:(ans$vp[2]-1)]
>   newy<-y[1:(ans$vp[2]-1)]
>   for (i in (2:(len-1)))
>   {
>     newx<-c(newx,x[ans$vp[i]])
>    newy<-c(newy,y[ans$vp[i]])
>   }
>   newx<-c(newx,x[(ans$vp[len-1]+1):n])
>   newy<-c(newy,y[(ans$vp[len-1]+1):n])
>   y<-approx(newx,newy,xout=x)$y
> #  cat("new y=",y,"\n")
>   ans<-vertex(x,y)
>   len<-length(ans$vx)
> #  cat("vx=",ans$vx,"\n")
> #  cat("vy=",ans$vy,"\n")
> }
>  return(list(wx=x,wy=y))}
> ###
> Epower<-function(nc, d, ne, pc = (0:((1 - d) * nc))/nc, alpha = 0.05)
> {
> #-------------------------------------
> # nc     sample size in historical control
> # d      the increase of response rate between historical and experiment
> # ne     sample size of corresonding rc of 0 to nc*(1-d)
> # pc     the response rate of control group, where we compute the
> #        expected power
> # alpha  the size of test
> #-------------------------------------
>  kk <- length(pc)
>  rc <- 0:(nc * (1 - d))
>  pp <- rep(NA, kk)
>  ppp <- rep(NA, kk)
>  for(i in 1:(kk)) {
>   pe <- pc[i] + d
>   lhood <- dbinom(rc, nc, pc[i])
>   pp <- power1.f(rc, nc, ne, pe, alpha)
>   ppp[i] <- sum(pp * lhood)/sum(lhood)
>  }
>  return(ppp)
> }
> # adapted from the old biss2
> ss.rand<-function(rc,nc,d,alpha=.05,power=.8,tol=.01)
> {
> ne<-nc
> ne1<-nc+50
> while(abs(ne-ne1)>tol & ne1<100000){
> ne<-ne1
> pe<-d+rc/nc
> ne1<-nef2(rc,nc,pe*ne,ne,alpha,power)
> ## if(is.na(ne1)) print(paste('rc=',rc,',nc=',nc,',pe=',pe,',ne=',ne))
> }
> if (ne1>100000) return(NA)
> else return(ne1)
> }
> ###
> power1.f<-function(rc,nc,ne,pie,alpha=0.05){
> #-------------------------------------
> # rc number of response in historical control
> # nc sample size in historical control
> # ne    sample size in experitment group
> # pie true response rate for experiment group
> # alpha size of the test
> #-------------------------------------
> za<-qnorm(1-alpha)
> re<-ne*pie
> xe<-asin(sqrt((re+0.375)/(ne+0.75)))
> xc<-asin(sqrt((rc+0.375)/(nc+0.75)))
> ans<-za*sqrt(1+(ne+0.5)/(nc+0.5))-(xe-xc)/sqrt(1/(4*(ne+0.5)))
> return(1-pnorm(ans))
> }
> 
> 
> 
> *************************************ORIGINAL SPLUS
> SCRIPT************************************************************
> ## sshc.ssc: sample size calculation for historical control studies
> ## J. Jack Lee (jjlee at mdanderson.org) and Chi-hong Tseng
> ## Department of Biostatistics, Univ. of Texas M.D. Anderson Cancer Center
> ##
> ## 3/1/99
> ## updated 6/7/00: add loess
> ##------------------------------------------------------------------
> ######## Required Input:
> #
> # rc    number of response in historical control group
> # nc    sample size in historical control
> # d      target improvement = Pe - Pc
> # method 1=method based on the randomized design
> #        2=Makuch & Simon method (Makuch RW, Simon RM. Sample size considerations
> #          for non-randomized comparative studies. J of Chron Dis 1980; 3:175-181.
> #        3=uniform power method
> ######## optional Input:
> #
> # alpha  size of the test
> # power  desired power of the test
> # tol    convergence criterion for methods 1 & 2 in terms of sample size
> # tol1  convergence criterion for method 3 at any given obs Rc in terms of
>  difference
> #          of expected power from target
> # tol2  overall convergence criterion for method 3 as the max absolute deviation
> #          of expected power from target for all Rc
> # cc    range of multiplicative constant applied to the initial values ne
> # l.span smoothing constant for loess
> #
> # Note:  rc is required for methods 1 and 2 but not 3
> #        method 3 return the sample size need for rc=0 to (1-d)*nc
> #
> ######## Output
> # for methdos 1 & 2: return the sample size needed for the experimental group (1
> number)
> #                    for given rc, nc, d, alpha, and power
> # for method 3:      return the profile of sample size needed for given nc, d, alpha, and
> power
> #                    vector $ne contains the sample size corresponding to rc=0, 1, 2, ... nc*(1-d)
> #                    vector $Ep contains the expected power corresponding to
> #                      the true pc = (0, 1, 2, ..., nc*(1-d)) / nc
> #
> 
> #------------------------------------------------------------------
> sshc _ function(rc, nc, d, method, alpha=0.05, power=0.8,
>                 tol=0.01, tol1=.0001, tol2=.005, cc=c(.1,2), l.span=.5)
> {
> ### for method 1
> if (method==1) {
>     ne1 _ ss.rand(rc,nc,d,alpha=.05,power=.8,tol=.01)
>     return(ne=ne1)
>                }
> ### for method 2
> if (method==2) {
> ne_nc
> ne1_nc+50
> while(abs(ne-ne1)>tol & ne1<100000){
> ne_ne1
> pe_d+rc/nc
> ne1_nef(rc,nc,pe*ne,ne,alpha,power)
> ## if(is.na(ne1)) print(paste('rc=',rc,',nc=',nc,',pe=',pe,',ne=',ne))
> }
> if (ne1>100000) return(NA)
> else return(ne=ne1)
> }
> ### for method 3
> if (method==3) {
> if (tol1 > tol2/10) tol1_tol2/10
> ncstar _ (1-d)*nc
> pc_(0:ncstar)/nc
> ne _ rep(NA,ncstar + 1)
> for (i in (0:ncstar))
> { ne[i+1] _ ss.rand(i,nc,d,alpha=.05,power=.8,tol=.01)
> }
> plot(pc,ne,type='l',ylim=c(0,max(ne)*1.5))
> ans_c.searchd(nc, d, ne, alpha, power, cc, tol1)
> ### check overall absolute deviance
> old.abs.dev _ sum(abs(ans$Ep-power))
> ##bad
>  _ 0
> print(round(ans$Ep,4))
> print(round(ans$ne,2))
> lines(pc,ans$ne,lty=1,col=8)
> old.ne _ ans$ne
> ##while(max(abs(ans$Ep-power))>tol2 & bad==0){  #### unnecessary ##
> while(max(abs(ans$Ep-power))>tol2){
> ans_c.searchd(nc, d, ans$ne, alpha, power, cc, tol1)
> abs.dev _ sum(abs(ans$Ep-power))
> print(paste(" old.abs.dev=",old.abs.dev))
> print(paste("    abs.dev=",abs.dev))
> ##if (abs.dev > old.abs.dev) { bad _ 1}
> old.abs.dev _ abs.dev
> print(round(ans$Ep,4))
> print(round(ans$ne,2))
> lines(pc,old.ne,lty=1,col=1)
> lines(pc,ans$ne,lty=1,col=8)
> ### add convex
> ans$ne _ convex(pc,ans$ne)$wy
> ### add loess
> ###old.ne _ ans$ne
> loess.ne _ loess(ans$ne ~ pc, span=l.span)
> lines(pc,loess.ne$fit,lty=1,col=4)
> old.ne _ loess.ne$fit
> ###readline()
> }
> return(ne=ans$ne, Ep=ans$Ep)
>                }
> }
> 
> ## needed for method 1
> nef2_function(rc,nc,re,ne,alpha,power){
> za_qnorm(1-alpha)
> zb_qnorm(power)
> xe_asin(sqrt((re+0.375)/(ne+0.75)))
> xc_asin(sqrt((rc+0.375)/(nc+0.75)))
> ans_
>  1/(4*(xc-xe)^2/(za+zb)^2-1/(nc+0.5)) - 0.5
> return(ans)
> }
> ## needed for method 2
> nef_function(rc,nc,re,ne,alpha,power){
> za_qnorm(1-alpha)
> zb_qnorm(power)
> xe_asin(sqrt((re+0.375)/(ne+0.75)))
> xc_asin(sqrt((rc+0.375)/(nc+0.75)))
> ans_(za*sqrt(1+(ne+0.5)/(nc+0.5))+zb)^2/(2*(xe-xc))^2-0.5
> return(ans)
> }
> ## needed for method 3
> c.searchd_function(nc, d, ne, alpha=0.05, power=0.8, cc=c(0.1,2),tol1=0.0001){
> #---------------------------
> # nc    sample size of control group
> # d      the differece to detect between control and experiment
> # ne    vector of starting sample size of experiment group
> #            corresonding to rc of 0 to nc*(1-d)
> # alpha  size of test
> # power  target power
> # cc      pre-screen vector of constant c, the range should cover the
> #            the value of cc that has expected power
> # tol1  the allowance between the expceted power and target power
> #---------------------------
> pc_(0:((1-d)*nc))/nc
> ncl _ length(pc)
> ne.old _ ne
> ne.old1 _ ne.old
> ###
>  sweeping forward
> for(i in 1:ncl){
>     cmin _ cc[1]
>     cmax _ cc[2]
> ### fixed cci_cmax bug
>     cci  _ 1
>     lhood _ dbinom((i:ncl)-1,nc,pc[i])
>     ne[i:ncl] _ (1+(cci-1)*(lhood/lhood[1])) * ne.old1[i:ncl]
>     Ep0  _ Epower(nc, d, ne, pc, alpha)
>     while(abs(Ep0[i]-power)>tol1){
>         if(Ep0[i]<power) cmin_cci
>         else cmax_cci
>         cci_(cmax+cmin)/2
>         ne[i:ncl] _ (1+(cci-1)*(lhood/lhood[1])) * ne.old1[i:ncl]
>         Ep0_Epower(nc, d, ne, pc, alpha)
>     }
>      ne.old1 _ ne
> }
> ne1 _ ne
> ### sweeping backward -- ncl:i
> ne.old2 _ ne.old
> ne      _ ne.old
> for(i in ncl:1){
>     cmin _ cc[1]
>     cmax _ cc[2]
> ### fixed cci_cmax bug
>     cci  _ 1
>     lhood _ dbinom((ncl:i)-1,nc,pc[i])
>     lenl  _ length(lhood)
>     ne[ncl:i] _ (1+(cci-1)*(lhood/lhood[lenl]))*ne.old2[ncl:i]
>     Ep0  _ Epower(nc, d, cci*ne, pc, alpha)
>     while(abs(Ep0[i]-power)>tol1){
>         if(Ep0[i]<power) cmin_cci
>         else cmax_cci
>         cci_(cmax+cmin)/2
>         ne[ncl:i] _ (1+(cci-1)*(lhood/lhood[lenl]))*ne.old2[ncl:i]
>         Ep0_Epower(nc, d, ne, pc, alpha)
>     }
>      ne.old2 _ ne
> }
> 
> ne2 _ ne
> ne _ (ne1+ne2)/2
> #cat(ccc*ne)
> Ep1_Epower(nc, d, ne, pc, alpha)
> return(ne=ne, Ep=Ep1)
> }
> ###
> vertex _ function(x,y)
> {     n _ length(x)
>     vx _ x[1]
>     vy _ y[1]
>     vp _ 1
>     up _ T
>     for (i in (2:n))
>     { if (up)
>         {     if (y[i-1] > y[i])
>             {vx _ c(vx,x[i-1])
>             vy _ c(vy,y[i-1])
>             vp _ c(vp,i-1)
>             up _ F
>             }
>         }
>         else
>         {     if (y[i-1] < y[i]) up _ T
>         }
>     }
>     vx _ c(vx,x[n])
>     vy _ c(vy,y[n])
>     vp _ c(vp,n)
>     return(vx=vx,vy=vy,vp=vp)
> }
> ###
> convex _ function(x,y)
> {
>     n _ length(x)
>     ans _ vertex(x,y)
>     len _ length(ans$vx)
>     while (len>3)
>     {
> #        cat("x=",x,"\n")
> #        cat("y=",y,"\n")
>         newx _ x[1:(ans$vp[2]-1)]
>         newy _ y[1:(ans$vp[2]-1)]
>         for (i in (2:(len-1)))
>         {
>             newx _ c(newx,x[ans$vp[i]])
>             newy _ c(newy,y[ans$vp[i]])
>         }
>         newx _ c(newx,x[(ans$vp[len-1]+1):n])
>         newy _ c(newy,y[(ans$vp[len-1]+1):n])
>         y _ approx(newx,newy,xout=x)$y
> #        cat("new y=",y,"\n")
>         ans _ vertex(x,y)
>         len _ length(ans$vx)
> #        cat("vx=",ans$vx,"\n")
> #        cat("vy=",ans$vy,"\n")
> 
> }
>     return(wx=x,wy=y)}
> ###
> Epower _ function(nc, d, ne, pc = (0:((1 - d) * nc))/nc, alpha = 0.05)
> {
> #-------------------------------------
> # nc    sample size in historical control
> # d      the increase of response rate between historical and experiment
> # ne    sample size of corresonding rc of 0 to nc*(1-d)
> # pc    the response rate of control group, where we compute the
> #        expected power
> # alpha  the size of test
> #-------------------------------------
>     kk <- length(pc)
>     rc <- 0:(nc * (1 - d))
>     pp <- rep(NA, kk)
>     ppp <- rep(NA, kk)
>     for(i in 1:(kk)) {
>         pe <- pc[i] + d
>         lhood <- dbinom(rc, nc, pc[i])
>         pp <- power1.f(rc, nc, ne, pe, alpha)
>         ppp[i] <- sum(pp * lhood)/sum(lhood)
>     }
>     return(ppp)
> }
> 
> # adapted from the old biss2
> ss.rand _ function(rc,nc,d,alpha=.05,power=.8,tol=.01)
> {
> ne_nc
> ne1_nc+50
> while(abs(ne-ne1)>tol & ne1<100000){
> ne_ne1
> pe_d+rc/nc
> ne1_nef2(rc,nc,pe*ne,ne,alpha,power)
> 
> ## if(is.na(ne1))
>  print(paste('rc=',rc,',nc=',nc,',pe=',pe,',ne=',ne))
> }
> if (ne1>100000) return(NA)
> else return(ne1)
> }
> ###
> power1.f_function(rc,nc,ne,pie,alpha=0.05){
> #-------------------------------------
> # rc    number of response in historical control
> # nc    sample size in historical control
> # ne    sample size in experitment group
> # pie    true response rate for experiment group
> # alpha    size of the test
> #-------------------------------------
> 
> za_qnorm(1-alpha)
> re_ne*pie
> xe_asin(sqrt((re+0.375)/(ne+0.75)))
> xc_asin(sqrt((rc+0.375)/(nc+0.75)))
> ans_za*sqrt(1+(ne+0.5)/(nc+0.5))-(xe-xc)/sqrt(1/(4*(ne+0.5)))
> return(1-pnorm(ans))
> }
> 
> ______________________________________________
> R-help at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.



More information about the R-help mailing list