[R] Thanks-solved:RE: problem extracting data from a set of list vectors
Vining, Kelly
Kelly.Vining at oregonstate.edu
Thu Apr 19 23:08:12 CEST 2012
Thanks Don and Jim,
"Get" did the trick! That command is new to me, and is exactly what this problem needed. The syntax that worked is actually slightly simpler than what was suggested. This is what worked:
all.comps <- ls(pattern="^res")
for(i in all.comps){
obj = get(i);
...
Thanks again.
--Kelly V.
-----Original Message-----
From: MacQueen, Don [mailto:macqueen1 at llnl.gov]
Sent: Thursday, April 19, 2012 11:38 AM
To: jim holtman; Vining, Kelly
Cc: r-help at r-project.org
Subject: Re: [R] problem extracting data from a set of list vectors
This looks like a correct correction.
Thanks
-Don
--
Don MacQueen
Lawrence Livermore National Laboratory
7000 East Ave., L-627
Livermore, CA 94550
925-423-1062
On 4/19/12 10:14 AM, "jim holtman" <jholtman at gmail.com> wrote:
>I think that instead of:
>
>obj = all.comps[[i]];
>
>you should have
>
>obj <- get(all.comps[i])
>
>Test out your programs step by step manually. Use the 'all.comps'
>object and see what happens with the various indexing modes. This is
>"debugging 101".
>
>On Thu, Apr 19, 2012 at 1:01 PM, Vining, Kelly
><Kelly.Vining at oregonstate.edu> wrote:
>> Thanks for the help, Don. Lots of good suggestions there.
>>Unfortunately, I'm still not able to access the data object. Still
>>looking for a solution. Here's the error I'm getting when I try your
>>suggestion:
>>
>> [1] "res.Callus.Explant" "res.Callus.Regen" "res.Explant.Regen"
>>> all.comps <- ls(pattern="^res")
>>> for(i in all.comps){
>> + obj = all.comps[[i]];
>> + gene.ids = rownames(obj$counts);
>> + x = data.frame(gene.ids = gene.ids, obj$e1, obj$e2, obj$log.fc,
>> + obj$p.value, obj$q.value); x = subset(x, x$obj.p.value<0.05 |
>> + x$obj.q.value<=0.1); cat("output object name is:
>> + ",paste("Diffgenes",i,sep="."),"\n");
>> + cat("output object data is: \n");
>> + print(tmp);
>> + cat("\n");
>> + }
>> Error in all.comps[[i]] : subscript out of bounds
>>
>>
>> In response to another helpful suggestion, here's the structure of
>>this data list:
>>
>>
>>> str(res.Callus.Explant)
>> List of 18
>> $ name : chr "two group comparison"
>> $ group1 : chr "Callus"
>> $ group2 : chr "Explant"
>> $ alternative : chr "two.sided"
>> $ rows : int [1:39009] 1 2 3 4 5 6 7 8 9 10 ...
>> $ counts : num [1:39009, 1:6] 0 121 237 6 7 116 6 2 860 0 ...
>> ..- attr(*, "dimnames")=List of 2
>> .. ..$ : chr [1:39009] "POPTR_0018s00200" "POPTR_0008s00200"
>>"POPTR_0004s00200" "POPTR_0019s00200" ...
>> .. ..$ : chr [1:6] "Callus_BiolRep1" "Callus_BiolRep2"
>>"Callus_BiolRep3" "Explant_BiolRep1" ...
>> $ eff.lib.sizes: Named num [1:6] 3120288 2788297 2425164 3653109
>>3810261 ...
>> ..- attr(*, "names")= chr [1:6] "V3" "V4" "V5" "V6" ...
>> $ dispersion : num [1:39009, 1:6] NA 0.0743 0.0434 0.6423 0.3554 ...
>> ..- attr(*, "dimnames")=List of 2
>> .. ..$ : chr [1:39009] "POPTR_0018s00200" "POPTR_0008s00200"
>>"POPTR_0004s00200" "POPTR_0019s00200" ...
>> .. ..$ : chr [1:6] "Callus_BiolRep1" "Callus_BiolRep2"
>>"Callus_BiolRep3" "Explant_BiolRep1" ...
>> $ x : num [1:6, 1:2] 1 1 1 1 1 1 1 1 1 0 ...
>> ..- attr(*, "dimnames")=List of 2
>> .. ..$ : chr [1:6] "Callus" "Callus" "Callus" "Explant" ...
>> .. ..$ : chr [1:2] "Intercept" "Callus-Explant"
>> $ beta0 : num [1:2] NA 0
>> $ beta.hat : num [1:39009, 1:2] NA -10.13 -9.65 -13 -12.2 ...
>> $ beta.tilde : num [1:39009, 1:2] NA -10.26 -9.74 -13.11 -12.33 ...
>> $ e : num [1:39009] NA 35.08 58.82 2.03 4.43 ...
>> $ e1 : num [1:39009] NA 30.23 53.77 1.78 3.89 ...
>> $ e2 : num [1:39009] NA 39.83 64.46 2.27 5.01 ...
>> $ log.fc : num [1:39009] NA 0.398 0.262 0.353 0.366 ...
>> $ p.values : num [1:39009] NA 0.246 0.33 0.748 0.645 ...
>> $ q.values : num [1:39009] NA 1 1 1 1 1 1 1 1 1 ...
>>
>> ________________________________________
>> From: MacQueen, Don [macqueen1 at llnl.gov]
>> Sent: Wednesday, April 18, 2012 2:42 PM
>> To: Vining, Kelly; r-help at r-project.org
>> Subject: Re: [R] problem extracting data from a set of list vectors
>>
>> Try this (NOT tested) or something similar:
>>
>> all.comps <- ls(pattern="^res")
>>
>> for(i in all.comps) {
>> obj <- all.comops[[i]]
>> gene.ids <- rownames(obj$counts)
>> x <- data.frame(gene.ids = gene.ids, obj$counts,
>> obj$e1, obj$e2,
>> obj$log.fc, obj$p.value,
>> obj$q.value)
>> x <- subset(x, obj.p.value<0.05 | obj.q.value<=0.1) assign(
>> paste('DiffGenes',i,sep='.') , x, '.GlobalEnv') }
>>
>> Before you try this, make sure you have a copy of everything, or can
>>
>> reconstruct it. The assign() function is dangerous. With it you can
>> overwrite other data if you are not careful.
>>
>> You might test first; instead of using assign() as above, instead do
>> cat('output object name is: ', paste('DiffGenes',i,sep='.'),'\n')
>> cat('output object data is:\n')
>> print(tmp)
>> cat('\n')
>>
>>
>>
>> To explain a little:
>> i is the name of the data structure, not the data structure itself
>> you extract the data structure from all.comps using [[i]]
>>
>> The assign() function takes the output object (tmp in this case) and
>> writes it to the "global environment" using a name that is
>> constructed using paste().
>>
>> The global environment is the first place in your search path; see
>> search().
>>
>> Note the simplification of the subset() statement.
>>
>> You don't need semi-colons at the end of each line.
>>
>> When you construct x, you might find it helpful to name the rest of
>> the columns, not just the first one. Instead of letting it construct names.
>>
>> I re-wrapped the lines in the hopes that my email software will not
>> re-wrap them for me.
>>
>> --
>> Don MacQueen
>>
>> Lawrence Livermore National Laboratory
>> 7000 East Ave., L-627
>> Livermore, CA 94550
>> 925-423-1062
>>
>>
>>
>>
>>
>> On 4/18/12 1:13 PM, "Vining, Kelly" <Kelly.Vining at oregonstate.edu>
>>wrote:
>>
>>>Dear useRs,
>>>
>>>A colleague has sent me several batches of output I need to process,
>>>and I'm struggling with the format to the point that I don't even
>>>know how to extract a test set to upload here. My apologies, but I
>>>think that my issue is straightforward enough (for some of you, not
>>>for me!) that you can help in the absence of a test set. Here is the
>>>scenario:
>>>
>>># Data sets are lists:
>>>> ls()
>>>[1] "res.Callus.Explant" "res.Callus.Regen" "res.Explant.Regen"
>>>> is.list(res.Callus.Explant)
>>>[1] TRUE
>>>
>>># The elements of each list look like this:
>>>> names(res.Callus.Explant)
>>> [1] "name" "group1" "group2" "alternative"
>>>"rows" "counts"
>>> [7] "eff.lib.sizes" "dispersion" "x" "beta0"
>>>"beta.hat" "beta.tilde"
>>>[13] "e" "e1" "e2" "log.fc"
>>>"p.values" "q.values"
>>>
>>>I want to 1) extract specific fields from this data structure into a
>>>data frame, 2) subset from this data frame into a new data frame
>>>based on selection criteria. What I've done is this:
>>>
>>>all.comps <- ls(pattern="^res")
>>>for(i in all.comps){
>>>obj = i;
>>>gene.ids = rownames(obj$counts);
>>>x = data.frame(gene.ids = gene.ids, obj$counts, obj$e1, obj$e2,
>>>obj$log.fc, obj$p.value, obj$q.value); DiffGenes.i = subset(x,
>>>x$obj.p.value<0.05 | x$obj.q.value<=0.1) }
>>>
>>>Obviously, this doesn't work because pattern searching in the first
>>>line is not feeding the entire data structure into the all.comps variable.
>>>But
>>>how can I accomplish feeding the whole data structure for each one of
>>>these lists into the loop? Should I be able to use sapply here? If
>>>so, how? Also, I suspect that "DiffGenes.i" is not going to give me
>>>the data frame I want, which in the example I'm showing would be
>>>"DiffGenes.res.Callus.Explant." How should I name output data frames
>>>from a loop like this (if a loop is even the best way to do this)?
>>>
>>>Any help with this will be greatly appreciated.
>>>
>>>--Kelly V.
>>>
>>>______________________________________________
>>>R-help at r-project.org mailing list
>>>https://stat.ethz.ch/mailman/listinfo/r-help
>>>PLEASE do read the posting guide
>>>http://www.R-project.org/posting-guide.html
>>>and provide commented, minimal, self-contained, reproducible code.
>>
>> ______________________________________________
>> R-help at r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
>>http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
>
>
>--
>Jim Holtman
>Data Munger Guru
>
>What is the problem that you are trying to solve?
>Tell me what you want to do, not how you want to do it.
More information about the R-help
mailing list