[R] Linux-Windows problem
Bos, Roger
roger.bos at rothschild.com
Tue Jul 6 17:54:36 CEST 2010
Its not an R problem, but an editor problem (therefore slightly off-topic I admit). I do most of the coding in Windows and somestimes the Rkward editor (in linux) will not open the file and it tells me it cannot determine the encoding. If I try to source that file into R (in the linux version) I sometimes get an unexpected character on line such and such, but I don't see any problem and the code runs fine in windows. The fix, I discovered is to open the file in notepad (in windows) and resave it. Then Rkward will open it just fine.
I am sure there is an easy setting I can change to make the two work more smoothly together, but I just haven't found it yet.
Thanks,
Roger
-----Original Message-----
From: henrik.bengtsson at gmail.com [mailto:henrik.bengtsson at gmail.com] On Behalf Of Henrik Bengtsson
Sent: Tuesday, July 06, 2010 9:24 AM
To: Bos, Roger
Cc: Uwe Ligges; Ildiko Varga; r-help
Subject: Re: [R] Linux-Windows problem
Sorry for asking the obvious, but have you confirmed that you are running the same version of R on both systems?
/H
On Tue, Jul 6, 2010 at 2:11 PM, Bos, Roger <roger.bos at rothschild.com> wrote:
> Uwe,
>
> I suspect I might be having a similar problem as the R code I generate
> in Windows editor (Tinn-R) doesn't always open properly in my Linux
> editor (Rkward), but I don't know how to change the default encoding
> in either one.
>
> In R on both machines, getOption("encoding") returns "native.enc", so
> the problem is not with R, but rather at the OS or editor level. If
> you or anyone could help me out that would be appreciated.
>
> Thanks,
>
> Roger
>
> -----Original Message-----
> From: r-help-bounces at r-project.org
> [mailto:r-help-bounces at r-project.org]
> On Behalf Of Uwe Ligges
> Sent: Monday, July 05, 2010 10:04 AM
> To: Ildiko Varga
> Cc: r-help at r-project.org
> Subject: Re: [R] Linux-Windows problem
>
>
>
> On 05.07.2010 14:31, Ildiko Varga wrote:
>> Dear All,
>>
>> I faced the following problem. With the same data.frame the results
>> are different under Linux and Windows.
>> Could you help on this topic?
>
> I guess you read in the data differently since you have different
> default encodings on both platforms (e.g. latin1 vs. UTF-8) and you
> data is probably not plain ASCII.
>
> Best,
> Uwe Ligges
>
>> Thanks in advance,
>> Ildiko
>>
>> Linux:
>> > d = read.csv("CRP.csv")
>> > d$drugCode = as.numeric(d$drug)
>> > cor(d, use="pairwise.complete.obs")
>> PATIENT BL.CRP X24HR.CRP X48HR.CRP drug
>> drugCode PATIENT NA NA NA NA NA
>> NA BL.CRP NA 1.0000000 0.84324880 -0.05699590 NA
>> -0.3367147 X24HR.CRP NA 0.8432488 1.00000000 -0.06162383 NA
>> -0.3557316 X48HR.CRP NA -0.0569959 -0.06162383 1.00000000 NA
>> 0.1553356 drug NA NA NA NA NA
>> NA drugCode NA -0.3367147 -0.35573159 0.15533562 NA
>> 1.0000000 Warning message:
>> In cor(d, use = "pairwise.complete.obs") : NAs introduced by coercion
>> > str(d)
>> 'data.frame': 41 obs. of 6 variables:
>> $ PATIENT : Factor w/ 41 levels "RV13","RV14",..: 2 3 4 6 7 12 13
>> 14
>> 15 17 ...
>> $ BL.CRP : num 7.3 31.2 4.2 6.7 1.6 7.7 5.3 38.9 1 7.3 ...
>> $ X24HR.CRP: num 6.1 24.9 11.1 4.9 1 5 3.7 18 1 7.3 ...
>> $ X48HR.CRP: num 121.5 40 28.4 34.5 33.3 ...
>> $ drug : Factor w/ 2 levels "active","placebo": 1 1 1 1 1 1 1
>> 1
> 1
>> 1 ...
>> $ drugCode : num 1 1 1 1 1 1 1 1 1 1 ...
>>
>> Windows:
>> > d = read.csv("CRP.csv")
>> > d$drugCode = as.numeric(d$drug)
>> > cor(d, use="pairwise.complete.obs") Error in cor(d, use =
>> "pairwise.complete.obs") : 'x' must be numeric
>> > str(d)
>> 'data.frame': 41 obs. of 6 variables:
>> $ PATIENT : Factor w/ 41 levels "RV13","RV14",..: 2 3 4 6 7 12 13
>> 14
>> 15 17 ...
>> $ BL.CRP : num 7.3 31.2 4.2 6.7 1.6 7.7 5.3 38.9 1 7.3 ...
>> $ X24HR.CRP: num 6.1 24.9 11.1 4.9 1 5 3.7 18 1 7.3 ...
>> $ X48HR.CRP: num 121.5 40 28.4 34.5 33.3 ...
>> $ drug : Factor w/ 2 levels "active","placebo": 1 1 1 1 1 1 1
>> 1
> 1
>> 1 ...
>> $ drugCode : num 1 1 1 1 1 1 1 1 1 1 ...
>>
>> [[alternative HTML version deleted]]
>>
>> ______________________________________________
>> R-help at r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
>> http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> R-help at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
> ***************************************************************
>
> This message is for the named person's use only. It
> may\...{{dropped:20}}
>
> ______________________________________________
> R-help at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
***************************************************************
This message is for the named person's use only. It may
contain confidential, proprietary or legally privileged
information. No right to confidential or privileged treatment
of this message is waived or lost by an error in transmission.
If you have received this message in error, please immediately
notify the the sender by e-mail, delete the message and all
copies from your system and destroy any hard copies. You must
not, directly or indirectly, use, disclose, distribute,
print or copy any part of this message if you are not
the intended recipient.
****************************************************************
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
More information about the R-help
mailing list