[R] Package Installation produces "gcc fails sanity check" error when installing RODBC error
Joe_K
joe_kirchner at yahoo.com
Mon Jan 28 04:45:18 CET 2008
Dear Friends,
I haven't used R very much, but am hoping to use it more. I recently
installed it again on my Linux machine and began to install a few packages,
which I figure I will need. I am also new to this forum. I hope I am
posting it in the right place.
I am trying to install a few packages in R and am receiving error messages.
Since the error messages are different for each install package request, I
am posting them separately. The first error is with the installation of
RODBC. I suspect the problem is with how the R package installer interfaces
with gcc.
The basic error message is:
========================================================================
gcc -std=gnu99 -E
configure: error: C preprocessor "gcc -std=gnu99 -E" fails sanity check
See `config.log' for more details.
ERROR: configuration failed for package 'RODBC'
========================================================================
See below for full output
I have been Googling the issue all weekend and have found similar errors,
but not exactly the same. Several of the responders to these error help
requests suggested that they install additional software, which I already
have.
The following relevant software is installed on the machine:
cpp
cpp41
cpp42
gcc
gcc-c++
gcc-fortran
gcc-fortran-32-bit
gcc-gij
gcc-info
gcc-java
gcc-locale
gcc-objc
gcc-obj-c++
gcc41
gcc41-c++
gcc41-fortran
gcc41-gij
gcc41-java
gcc41-objc
gcc41-obj-c++
gcc41-testresults
gcc42
gcc42-ada
gcc42-c++
gcc42-fortran
gcc42-fortran-32bit
gcc42-gij
gcc42-info
gcc42-java
gcc42-locale
gcc42-objc
gcc42-obj-c++
gcc42-objc-32bit
gcc42-testresults
libgcc42
libgcc42-32bit
libgcc41
libgcc41-32bit
libgcj42
libgcj42-32bit
glibc
glibc-32-bit
glibc-devel
glibc-devel-32bit
glibc-html
glibc-i18ndata
glibc-info
glibc-locale
glibc-locale-32bit
glibc-obsolete
glibc-profile
glibc-profile-32bit
I am running R version 2.6.1 (2007-11-26) on Suse Linux 10.3 64-bit x86_64
on a Boxx Technologies computer with a TYAN Thunder K8WE S2895 Motherboard
with 4Gb Ram and 2 dual CPUs (total of 4 CPUs). The CPUs are AMD Opteron.
Hard Disk Usage is 4 150 Gb SATA drives array with a Com3 9550SX Controller
set at RAID 5.
Initially I tried installation through Rkward, but also tried from the R
command prompt as well. Rkward provides more verbose error reporting.
Below is the full output when I attempt to install the package through
Rkward [Settings][Configure Packages].
Thanks for your help,
Joe
Full Output
========================================================================
R version 2.6.1 (2007-11-26
Copyright (C) 2007 The R Foundation for Statistical Computing
ISBN 3-900051-07-0
R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.
Natural language support but running in an English locale
R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.
Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.
>
options (repos=c (CRAN="http://lib.stat.cmu.edu/R/CRAN"))
>
install.packages (pkgs=c ("RODBC"),
lib="/home/joe/R/x86_64-unknown-linux-gnu-library/2.6",
destdir="/home/joe/.rkward/package_archive", dependencies=TRUE)
trying URL 'http://lib.stat.cmu.edu/R/CRAN/src/contrib/RODBC_1.2-2.tar.gz'
Content type 'application/x-gzip
length 90330 bytes (88 Kb)
opened URL
downloaded 88 Kb
/home/joe/R/x86_64-unknown-linux-gnu-library/2.6
* Installing *source* package 'RODBC' ...
checking for gcc...
gcc -std=gnu99
checking for C compiler default output file name...
a.out
checking whether the C compiler works...
yes
checking whether we are cross compiling...
no
checking for suffix of executables...
checking for suffix of object files...
o
checking whether we are using the GNU C compiler...
yes
checking whether gcc -std=gnu99 accepts -g...
yes
checking for gcc -std=gnu99 option to accept ANSI C...
none needed
checking how to run the C preprocessor...
gcc -std=gnu99 -E
configure: error: C preprocessor "gcc -std=gnu99 -E" fails sanity check
See `config.log' for more details.
ERROR: configuration failed for package 'RODBC'
** Removing '/home/joe/R/x86_64-unknown-linux-gnu-library/2.6/RODBC'
Warning message:
In install.packages(pkgs = c("RODBC"), lib =
"/home/joe/R/x86_64-unknown-linux-gnu-library/2.6", :
installation of package 'RODBC' had non-zero exit status
>
q ()
========================================================================
The error message suggests that I check the "config.log." When I look at
the config.log, it appears to be reportinting debug information on a
separate problem having to do with the installation of HP multifunction
printer software, but not to do with the RODBC package. Here is a copy of
that. Perhaps you can see something that I can't:
========================================================================
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by HP Linux Imaging and Printing configure 2.7.12, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --enable-network-build --disable-pp-build --enable-fax-build
--enable-gui-build --enable-scan-build --enable-doc-build
--enable-foomatic-ppd-install --disable-foomatic-xml-install
--with-hpppddir=/usr/share/cups/model/manufacturer-PPDs/hp
--disable-hpijs-only-build --libdir=/usr/lib64 --prefix=/usr
## --------- ##
## Platform. ##
## --------- ##
hostname = Workstation
uname -m = x86_64
uname -r = 2.6.22.13-0.3-default
uname -s = Linux
uname -v = #1 SMP 2007/11/19 15:02:58 UTC
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /opt/kde3/bin
PATH: /home/joe/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/X11R6/bin
PATH: /usr/games
PATH: /opt/bin
PATH: /usr/lib64/jvm/jre/bin
PATH: /usr/lib/mit/bin
PATH: /usr/lib/mit/sbin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2049: checking for a BSD-compatible install
configure:2105: result: /usr/bin/install -c
configure:2116: checking whether build environment is sane
configure:2159: result: yes
configure:2224: checking for gawk
configure:2240: found /usr/bin/gawk
configure:2251: result: gawk
configure:2262: checking whether make sets $(MAKE)
configure:2283: result: yes
configure:2546: checking build system type
configure:2564: result: x86_64-unknown-linux-gnu
configure:2586: checking host system type
configure:2601: result: x86_64-unknown-linux-gnu
configure:2635: checking for style of include used by make
configure:2663: result: GNU
configure:2736: checking for gcc
configure:2752: found /usr/bin/gcc
configure:2763: result: gcc
configure:3001: checking for C compiler version
configure:3008: gcc --version >&5
gcc (GCC) 4.2.1 (SUSE Linux)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3011: $? = 0
configure:3018: gcc -v >&5
Using built-in specs.
Target: x86_64-suse-linux
Configured with: ../configure --enable-threads=posix --prefix=/usr
--with-local-prefix=/usr/local --infodir=/usr/share/info
--mandir=/usr/share/man --libdir=/usr/lib64 --libexecdir=/usr/lib64
--enable-languages=c,c++,objc,fortran,obj-c++,java,ada
--enable-checking=release --with-gxx-include-dir=/usr/include/c++/4.2.1
--enable-ssp --disable-libssp --disable-libgcj --with-slibdir=/lib64
--with-system-zlib --enable-shared --enable-__cxa_atexit
--enable-libstdcxx-allocator=new --disable-libstdcxx-pch
--program-suffix=-4.2 --enable-version-specific-runtime-libs
--without-system-libunwind --with-cpu=generic --host=x86_64-suse-linux
Thread model: posix
gcc version 4.2.1 (SUSE Linux)
configure:3021: $? = 0
configure:3028: gcc -V >&5
gcc: '-V' option must have argument
configure:3031: $? = 1
configure:3054: checking for C compiler default output file name
configure:3081: gcc conftest.c >&5
configure:3084: $? = 0
configure:3122: result: a.out
configure:3139: checking whether the C compiler works
configure:3149: ./a.out
configure:3152: $? = 0
configure:3169: result: yes
configure:3176: checking whether we are cross compiling
configure:3178: result: no
configure:3181: checking for suffix of executables
configure:3188: gcc -o conftest conftest.c >&5
configure:3191: $? = 0
configure:3215: result:
configure:3221: checking for suffix of object files
configure:3247: gcc -c conftest.c >&5
configure:3250: $? = 0
configure:3273: result: o
configure:3277: checking whether we are using the GNU C compiler
configure:3306: gcc -c conftest.c >&5
configure:3312: $? = 0
configure:3329: result: yes
configure:3334: checking whether gcc accepts -g
configure:3364: gcc -c -g conftest.c >&5
configure:3370: $? = 0
configure:3469: result: yes
configure:3486: checking for gcc option to accept ISO C89
configure:3560: gcc -c -g -O2 conftest.c >&5
configure:3566: $? = 0
configure:3589: result: none needed
configure:3609: checking dependency style of gcc
configure:3699: result: gcc3
configure:3716: checking for a sed that does not truncate output
configure:3770: result: /usr/bin/sed
configure:3773: checking for grep that handles long lines and -e
configure:3847: result: /usr/bin/grep
configure:3852: checking for egrep
configure:3930: result: /usr/bin/grep -E
configure:3946: checking for ld used by gcc
configure:4013: result: /usr/x86_64-suse-linux/bin/ld
configure:4022: checking if the linker (/usr/x86_64-suse-linux/bin/ld) is
GNU ld
configure:4037: result: yes
configure:4042: checking for /usr/x86_64-suse-linux/bin/ld option to reload
object files
configure:4049: result: -r
configure:4067: checking for BSD-compatible nm
configure:4116: result: /usr/bin/nm -B
configure:4120: checking whether ln -s works
configure:4124: result: yes
configure:4131: checking how to recognise dependent libraries
configure:4307: result: pass_all
configure:4395: gcc -c -g -O2 conftest.c >&5
configure:4398: $? = 0
configure:4541: checking how to run the C preprocessor
configure:4581: gcc -E conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4581: gcc -E conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4581: gcc -E -traditional-cpp conftest.c
In file included from /usr/include/features.h:323,
from /usr/include/assert.h:38,
from conftest.c:14:
/usr/include/sys/cdefs.h:32: error: #error "You need a ISO C conforming
compiler to use the glibc headers"
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4581: gcc -E -traditional-cpp conftest.c
In file included from /usr/include/features.h:323,
from /usr/include/assert.h:38,
from conftest.c:14:
/usr/include/sys/cdefs.h:32: error: #error "You need a ISO C conforming
compiler to use the glibc headers"
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4581: /lib/cpp conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4581: /lib/cpp conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4587: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4657: result: /lib/cpp
configure:4686: /lib/cpp conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4692: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4686: /lib/cpp conftest.c
In file included from /usr/include/bits/posix1_lim.h:153,
from /usr/include/limits.h:145,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:122,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/syslimits.h:7,
from
/usr/lib64/gcc/x86_64-suse-linux/4.2.1/include/limits.h:11,
from conftest.c:11:
/usr/include/bits/local_lim.h:36:26: error: linux/limits.h: No such file or
directory
configure:4692: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "HP Linux Imaging and Printing"
| #define PACKAGE_TARNAME "hplip"
| #define PACKAGE_VERSION "2.7.12"
| #define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
| #define PACKAGE_BUGREPORT "2.7.12.10"
| #define PACKAGE "hplip"
| #define VERSION "2.7.12"
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:4754: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PYTHONINCLUDEDIR_set=
ac_cv_env_PYTHONINCLUDEDIR_value=
ac_cv_env_PYTHON_set=
ac_cv_env_PYTHON_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP=/lib/cpp
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_make_make_set=yes
am_cv_CC_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_path_LD=/usr/x86_64-suse-linux/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/usr/bin/sed
lt_cv_prog_gnu_ld=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /home/joe/missing --run aclocal-1.9'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /home/joe/missing --run tar'
APDK_AUTO_INCLUDE_FLAG=''
APDK_ENDIAN_FLAG=''
AR=''
AUTOCONF='${SHELL} /home/joe/missing --run autoconf'
AUTOHEADER='${SHELL} /home/joe/missing --run autoheader'
AUTOMAKE='${SHELL} /home/joe/missing --run automake-1.9'
AWK='gawk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-g -O2'
CPP='/lib/cpp'
CPPFLAGS=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
CYGPATH_W='echo'
DARWIN_BUILD_FALSE=''
DARWIN_BUILD_TRUE=''
DEFS=''
DEPDIR='.deps'
DOC_BUILD_FALSE=''
DOC_BUILD_TRUE=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
F77=''
FAX_BUILD_FALSE=''
FAX_BUILD_TRUE=''
FFLAGS=''
GREP='/usr/bin/grep'
GUI_BUILD_FALSE=''
GUI_BUILD_TRUE=''
HPLIP_BUILD_FALSE=''
HPLIP_BUILD_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S='ln -s'
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/joe/missing --run makeinfo'
OBJEXT='o'
PACKAGE='hplip'
PACKAGE_BUGREPORT='2.7.12.10'
PACKAGE_NAME='HP Linux Imaging and Printing'
PACKAGE_STRING='HP Linux Imaging and Printing 2.7.12'
PACKAGE_TARNAME='hplip'
PACKAGE_VERSION='2.7.12'
PATH_SEPARATOR=':'
PYTHON=''
PYTHONINCLUDEDIR=''
PYTHON_EXEC_PREFIX=''
PYTHON_PLATFORM=''
PYTHON_PREFIX=''
PYTHON_VERSION=''
RANLIB=''
SCAN_BUILD_FALSE=''
SCAN_BUILD_TRUE=''
SET_MAKE=''
SHADOW_BUILD_FALSE=''
SHADOW_BUILD_TRUE=''
SHELL='/bin/sh'
STRIP=''
VERSION='2.7.12'
abs_datadir=''
abs_docdir=''
abs_foomaticdir=''
abs_hpppddir=''
abs_ppddir=''
abs_sbindir=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include='include'
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
cups11_build=''
cupsbackenddir=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
doc_build=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
fax_build=''
foomatic_ppd_install=''
foomatic_xml_install=''
foomaticdir=''
gui_build=''
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
hpdocdir=''
hpppddir=''
htmldir='${docdir}'
icondir=''
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='/home/joe/install-sh'
libdir='/usr/lib64'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='mkdir -p --'
network_build=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgpyexecdir=''
pkgpythondir=''
pp_build=''
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pyexecdir=''
pythondir=''
sbindir='${exec_prefix}/sbin'
scan_build=''
shadow_build=''
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "HP Linux Imaging and Printing"
#define PACKAGE_TARNAME "hplip"
#define PACKAGE_VERSION "2.7.12"
#define PACKAGE_STRING "HP Linux Imaging and Printing 2.7.12"
#define PACKAGE_BUGREPORT "2.7.12.10"
#define PACKAGE "hplip"
#define VERSION "2.7.12"
configure: exit 1
--
View this message in context: http://www.nabble.com/Package-Installation-produces-%22gcc-fails-sanity-check%22-error-when-installing-RODBC-error-tp15127792p15127792.html
Sent from the R help mailing list archive at Nabble.com.
More information about the R-help
mailing list