[R] R package development in windows
Liaw, Andy
andy_liaw at merck.com
Fri May 4 16:52:42 CEST 2007
I guess it depends on what you want to be able to do with such a private
package; e.g., does it not need to have any documentation (i.e., the Rd
files)? If all you want is to be able to access the objects, you can
just save() all those objects (mostly functions, I presume) in a .rda
file, and whenever you need them. just attach() the .rda file.
Andy
From: Lucke, Joseph F
>
> Might there be an (semi-)automated procedure to create a minimal,
> personal package, for my eyes only, that I can load with a
> "libray(MyStuff)" command? This would be preferable to having to
> source() the files. Is there already such a procedure?
> Joe
> -----Original Message-----
> From: r-help-bounces at stat.math.ethz.ch
> [mailto:r-help-bounces at stat.math.ethz.ch] On Behalf Of Doran, Harold
> Sent: Thursday, May 03, 2007 2:33 PM
> To: Duncan Murdoch
> Cc: r-help at stat.math.ethz.ch
> Subject: Re: [R] [SPAM] - Re: R package development in windows -
> BayesianFilter detected spam
>
> Thanks, Duncan. I'll look into that. Is there an
> authoritative document
> that codifies the new package development procedures for 2.5.0
> (windows-specific), or is that Writing R Extensions? In this thread
> alone I've received multiple emails pointing to multiple web
> sites with
> instructions for windows. Inasmuch as its appreciated, I'm a bit
> confused as to which I should consider authoritative.
>
> I do hope I can resolve this and appreciate the help I've received.
> However, I feel a bit compelled to note how very difficult
> this process
> is.
>
> Harold
>
>
> > -----Original Message-----
> > From: Duncan Murdoch [mailto:murdoch at stats.uwo.ca]
> > Sent: Thursday, May 03, 2007 3:24 PM
> > To: Doran, Harold
> > Cc: Gabor Grothendieck; r-help at stat.math.ethz.ch
> > Subject: [SPAM] - Re: [R] R package development in windows
> - Bayesian
> > Filter detected spam
> >
> > On 5/3/2007 3:04 PM, Doran, Harold wrote:
> > > Thanks Gabor, Sundar, and Tony. Indeed, Rtools was
> missing from the
> > > path. With that resolved, and another 10 minute windows
> > restart, I get
> > > the following below. The log suggests that hhc is not
> installed. It
> > > is, and, according to the directions I am following, I have
> > placed it
> > > in the c:\cygwin directory.
> >
> > I think the problem is that you are following a real mix of
> > instructions, and they don't make sense.
> >
> > It would be nice if folks would submit patches to the R
> Admin manual
> > (or to the Rtools web site) rather than putting together web sites
> > with advice that is bad from day one, and quickly gets
> worse when it
> > is not updated.
> >
> > > BTW, package.skeleton() doesn't seem to create the correct
> > DESCRIPTION
> > > template. I had to add the DEPENDS line. Without this, I
> > get another
> > > error.
> > >
> > >
> > > C:\Program Files\R\R-2.4.1\bin>Rcmd build --force --binary g:\foo
> >
> > R 2.4.1 is no longer current; the package building
> instructions in R
> > 2.5.0 have been simplified a bit. You might want to try those.
> >
> > Duncan Murdoch
> >
> > > * checking for file 'g:\foo/DESCRIPTION' ... OK
> > > * preparing 'g:\foo':
> > > * checking DESCRIPTION meta-information ... OK
> > > * removing junk files
> > > * checking for LF line-endings in source files
> > > * checking for empty or unneeded directories
> > > * building binary distribution
> > > WARNING
> > > * some HTML links may not be found
> > > installing R.css in c:/TEMP/Rinst40061099
> > >
> > > Using auto-selected zip options ''
> > > latex: not found
> > > latex: not found
> > > latex: not found
> > >
> > > ---------- Making package foo ------------
> > > latex: not found
> > > adding build stamp to DESCRIPTION
> > > latex: not found
> > > latex: not found
> > > latex: not found
> > > installing R files
> > > latex: not found
> > > installing data files
> > > latex: not found
> > > installing man source files
> > > installing indices
> > > latex: not found
> > > not zipping data
> > > installing help
> > > Warning: \alias{foo} already in foo-package.Rd -- skipping
> > the one in
> > > foo.Rd >>> Building/Updating help pages for package 'foo'
> > > Formats: text html latex example chm
> > > foo-package text html latex
> > example chm
> > > foo text html latex
> > example chm
> > > mydata text html latex
> > example chm
> > > hhc: not found
> > > cp: cannot stat `c:/TEMP/Rbuild40048815/foo/chm/foo.chm':
> > No such file
> > > or direct ory
> > > make[1]: *** [chm-foo] Error 1
> > > make: *** [pkg-foo] Error 2
> > > *** Installation of foo failed ***
> > >
> > > Removing 'c:/TEMP/Rinst40061099/foo'
> > > ERROR
> > > * installation failed
> > >
> > >
> > > C:\Program Files\R\R-2.4.1\bin>
> > >
> > >> -----Original Message-----
> > >> From: Gabor Grothendieck [mailto:ggrothendieck at gmail.com]
> > >> Sent: Thursday, May 03, 2007 2:50 PM
> > >> To: Doran, Harold
> > >> Cc: r-help at stat.math.ethz.ch
> > >> Subject: Re: [R] R package development in windows
> > >>
> > >> It can find sh.exe so you haven't installed Rtools.
> > >>
> > >> There are several HowTo's listed in the links section here that
> > >> include pointers to R manuals and other step by step
> > >> instructions:
> > >>
> > >> http://code.google.com/p/batchfiles/
> > >>
> > >> On 5/3/07, Doran, Harold <HDoran at air.org> wrote:
> > >> > I'm attempting to build an R package for distribution and
> > >> am working
> > >> > from the directions found at
> > >> >
> > >>
> >
> http://www.maths.bris.ac.uk/~maman/computerstuff/Rhelp/Rpackages.html
> > >> #
> > >> > Wi
> > >> > n-Win
> > >> >
> > >> > I've read through Writing R Extensions and various other
> > >> "helpful" web
> > >> > sites. I've installed all relevant software (perl,
> > cygwin, mingwin,
> > >> > hhc.exe). Here is what I have done so far:
> > >> >
> > >> > 1) Sourced data and functions into R
> > >> > 2) Used package.skeleton
> > >> > 3) Edited Description file
> > >> > 4) Edited my windows path to ensure the new programs (e.g.,
> > >> perl) are
> > >> > in the path
> > >> > 5) Then, I open DOS and do the following in the script below
> > >> >
> > >> > C:\Program Files\R\R-2.4.1\bin>Rcmd build --force
> > --binary g:\foo
> > >> > * checking for file 'g:\foo/DESCRIPTION' ... OK
> > >> > * preparing 'g:\foo':
> > >> > * checking DESCRIPTION meta-information ...'sh' is not
> > >> recognized as
> > >> > an internal or external command, operable program or
> batch file.
> > >> > OK
> > >> > * removing junk files
> > >> > 'sh' is not recognized as an internal or external
> > command, operable
> > >> > program or batch file.
> > >> > 'sh' is not recognized as an internal or external
> > command, operable
> > >> > program or batch file.
> > >> > 'sh' is not recognized as an internal or external
> > command, operable
> > >> > program or batch file.
> > >> > Error: cannot open file 'foo/DESCRIPTION' for reading
> > >> >
> > >> > I'ver read through about as much documentation as I can
> > >> find, and I'm
> > >> > just not sure what I should do from here. I admit that I
> > >> have reached
> > >> > a point of frustration and must apologize if the problem
> > would be
> > >> > evident if I read documentation further, but I'm about
> > tapped out
> > >> > after a few days of experimentation.
> > >> >
> > >> > Can anyone suggest how I could resolve this and what the
> > next steps
> > >> > would be?
> > >> >
> > >> > Thanks:
> > >> >
> > >> > I'm using Windows XP and R 2.4.1
> > >> >
> > >> > Harold
> > >> >
> > >> > [[alternative HTML version deleted]]
> > >> >
> > >> > ______________________________________________
> > >> > R-help at stat.math.ethz.ch mailing list
> > >> > https://stat.ethz.ch/mailman/listinfo/r-help
> > >> > PLEASE do read the posting guide
> > >> > http://www.R-project.org/posting-guide.html
> > >> > and provide commented, minimal, self-contained,
> > reproducible code.
> > >> >
> > >>
> > >
> > > ______________________________________________
> > > R-help at stat.math.ethz.ch mailing list
> > > https://stat.ethz.ch/mailman/listinfo/r-help
> > > PLEASE do read the posting guide
> > > http://www.R-project.org/posting-guide.html
> > > and provide commented, minimal, self-contained, reproducible code.
> >
> >
>
> ______________________________________________
> R-help at stat.math.ethz.ch mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> R-help at stat.math.ethz.ch mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
>
>
------------------------------------------------------------------------------
Notice: This e-mail message, together with any attachments,...{{dropped}}
More information about the R-help
mailing list