[R] Principal Component analysis question

[christian]

IMHO try 
princomp [fun<-princomp(V1+V2+V3+V4+V5)]  without ~ for negation in this manner !?
regards,christian


Am 11.04.2002 00:43:43, schrieb Damien Joly <do_joly at yahoo.ca>:

>I have a question about princomp(mva) that I hope isn't too newbie.
>
>I used the sample data from Table 1.1 in "Manly (1986/1994) Multivariate 
>Statistical Methods: a primer. Chapman and Hall" on sparrow body 
>measurements.
>
>I rescaled the data to mean 0 and SD 1, and the covariance matrix is:
>
>           V1        V2        V3        V4        V5
>V1 1.0000000 0.7349642 0.6618119 0.6452841 0.6051247
>V2 0.7349642 1.0000000 0.6737411 0.7685087 0.5290138
>V3 0.6618119 0.6737411 1.0000000 0.7631899 0.5262701
>V4 0.6452841 0.7685087 0.7631899 1.0000000 0.6066493
>V5 0.6051247 0.5290138 0.5262701 0.6066493 1.0000000
>
>Now when I call princomp [fun<-princomp(~V1+V2+V3+V4+V5)], I get the 
>following loadings:
>
>        Comp.1      Comp.2     Comp.3      Comp.4     Comp.5
>V1 -0.4517989 -0.05072137  0.6904702  0.42041399 -0.3739091
>V2 -0.4616809  0.29956355  0.3405484 -0.54786307  0.5300805
>V3 -0.4505416  0.32457242 -0.4544927  0.60629605  0.3427923
>V4 -0.4707389  0.18468403 -0.4109350 -0.38827811 -0.6516665
>V5 -0.3976754 -0.87648935 -0.1784558 -0.06887199  0.1924341
>
>However, this is in contrast to the results in Manly's book:
>
>       Comp.1      Comp.2     Comp.3      Comp.4     Comp.5
>V1 0.4517989 -0.05072137  0.6904702 -0.42041399  0.3739091
>V2 0.4616809  0.29956355  0.3405484  0.54786307 -0.5300805
>V3 0.4505416  0.32457242 -0.4544927 -0.60629605 -0.3427923
>V4 0.4707389  0.18468403 -0.4109350  0.38827811  0.6516665
>V5 0.3976754 -0.87648935 -0.1784558  0.06887199 -0.1924341
>
>Interestingly, when I do the same in SAS, I get:
>
>        Comp.1      Comp.2     Comp.3      Comp.4     Comp.5
>V1  0.4517989  0.05072137 -0.6904702  0.42041399 -0.3739091
>V2  0.4616809 -0.29956355 -0.3405484 -0.54786307  0.5300805
>V3  0.4505416 -0.32457242  0.4544927  0.60629605  0.3427923
>V4  0.4707389 -0.18468403  0.4109350 -0.38827811 -0.6516665
>V5  0.3976754  0.87648935  0.1784558 -0.06887199  0.1924341
>
>Finally, when I do it by "hand" in R (i.e., c<-cov(data); e<-eigen(c)), 
>I get a fourth answer:
>
>           V5          V4         V3          V2         V1
>V1 0.4517989  0.05072137 -0.6904702 -0.42041399 -0.3739091
>V2 0.4616809 -0.29956355 -0.3405484  0.54786307  0.5300805
>V3 0.4505416 -0.32457242  0.4544927 -0.60629605  0.3427923
>V4 0.4707389 -0.18468403  0.4109350  0.38827811 -0.6516665
>V5 0.3976754  0.87648935  0.1784558  0.06887199  0.1924341
>
>
>Can anyone point me in the right direction here?  I can email the raw 
>data to anyone if that would help.
>
>Thank you in advance...
>
>Damien
>
>-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
>r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
>Send "info", "help", or "[un]subscribe"
>(in the "body", not the subject !)  To: r-help-request at stat.math.ethz.ch
>_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._
>



-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html
Send "info", "help", or "[un]subscribe"
(in the "body", not the subject !)  To: r-help-request at stat.math.ethz.ch
_._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._