[Rd] question about Makeconf and nvcc/CUDA
Prof Brian Ripley
ripley at stats.ox.ac.uk
Thu Jul 18 14:53:56 CEST 2013
You will need a src/Makevars.win to get a .cu file to compile. It is
not a known extension: see §1.1.4 of 'Writing R Extensions'
Most likely you need something like
cudasize.dll:
nvcc -m32 --shared -o $@ cuda4.cu
in Makevars.win.
Also, heed the advice about trying R CMD INSTALL before R CMD check.
On 18/07/2013 13:45, Hodgess, Erin wrote:
> Now let's try again. I set up the CYGWIN environment command as kindly suggested by Prof. Ripley.
>
> Here are my next steps:
>
> R CMD build cudasize
> * checking for file 'cudasize/DESCRIPTION' ... OK
> * preparing 'cudasize':
> * checking DESCRIPTION meta-information ... OK
> * cleaning src
> Warning: C:/Users/erin/AppData/Local/Temp/RtmpOWOS4q/Rbuilda8820822194/cudasize/man/f1.Rd:33: unexpected '{'
> Warning: C:/Users/erin/AppData/Local/Temp/RtmpOWOS4q/Rbuilda8820822194/cudasize/man/f1.Rd:37: unexpected '}'
> * checking for LF line-endings in source and make files
> * checking for empty or unneeded directories
> * building 'cudasize_1.0.tar.gz'
>
>
> c:\PROGRA~1\R\R-3.0.1\bin\i386>R CMD check cudasize_1.0.tar.gz
> R CMD check cudasize_1.0.tar.gz
> * using log directory 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck'
> * using R version 3.0.1 (2013-05-16)
> * using platform: i386-w64-mingw32 (32-bit)
> * using session charset: ISO8859-1
> * checking for file 'cudasize/DESCRIPTION' ... OK
> * checking extension type ... Package
> * this is package 'cudasize' version '1.0'
> * checking package namespace information ... OK
> * checking package dependencies ... OK
> * checking if this is a source package ... WARNING
> Subdirectory 'src' contains:
> cuda4.cu
> These are unlikely file names for src files.
> * checking if there is a namespace ... OK
> * checking for executable files ... OK
> * checking for hidden files and directories ... OK
> * checking for portable file names ... OK
> * checking whether package 'cudasize' can be installed ... ERROR
> Installation failed.
> See 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck/00install.out' for details.
>
> And the 00install.out file is:
> * installing *source* package 'cudasize' ...
> ** libs
>
> *** arch - i386
> ERROR: compilation failed for package 'cudasize'
> * removing 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck/cudasize'
>
> So it doesn't seem that CUDA is working here. However, if I compile cuda4.cu from the command line, it works fine, as seen here:
>
> nvcc -m32 --shared -o cuda4.dll cuda4.cu
> nvcc -m32 --shared -o cuda4.dll cuda4.cu
> cuda4.cu
> tmpxft_000013d4_00000000-5_cuda4.cudafe1.gpu
> tmpxft_000013d4_00000000-10_cuda4.cudafe2.gpu
> cuda4.cu
> tmpxft_000013d4_00000000-5_cuda4.cudafe1.cpp
> tmpxft_000013d4_00000000-15_cuda4.ii
>
> So that is my situation.
>
> This is Windows 7, R version 3.0.1
> Thanks,
> Erin
>
> ________________________________________
> From: r-devel-bounces at r-project.org [r-devel-bounces at r-project.org] on behalf of Prof Brian Ripley [ripley at stats.ox.ac.uk]
> Sent: Thursday, July 18, 2013 2:44 AM
> To: r-devel at r-project.org
> Subject: Re: [Rd] question about Makeconf and nvcc/CUDA
>
> On 18/07/2013 07:45, Hodgess, Erin wrote:
>> Dear R development:
>>
>>
>>
>> I'm not sure if this is the appropriate list, but it's a start.
>>
>>
>>
>> I would like to put together a package which contains a CUDA program on Windows 7. I believe that it has to do with the Makeconf file in the etc directory.
>
> That message is just that you have not set up Rtools fully. As it says,
> set CYGWIN=nodosfilewarning in your environment. See §D.3 in the
> R-admin manual, e.g.
> http://cran.r-project.org/doc/manuals/r-release/R-admin.html#The-command-line-tools
> .
>
> We can see nothing from what you supplied, as it was not a build in
> clean sources.
>
>
>
>>
>>
>> But when I just use the nvcc with the shared option, I can use the dyn.load command, but when I use the is.loaded function, it shows FALSE.
>>
>>
>>
>>
>>
>>
>>
>> Here are the results of the check command:
>>
>>
>>
>> c:\PROGRA~1\R\R-3.0.1\bin\i386>R CMD check cudasize
>> R CMD check cudasize
>> * using log directory 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck'
>> * using R version 3.0.1 (2013-05-16)
>> * using platform: i386-w64-mingw32 (32-bit)
>> * using session charset: ISO8859-1
>> * checking for file 'cudasize/DESCRIPTION' ... OK
>> * checking extension type ... Package
>> * this is package 'cudasize' version '1.0'
>> * checking package namespace information ... OK
>> * checking package dependencies ... OK
>> * checking if this is a source package ... OK
>> * checking if there is a namespace ... OK
>> * checking for executable files ... OK
>> * checking for hidden files and directories ... OK
>> * checking for portable file names ... OK
>> * checking whether package 'cudasize' can be installed ... ERROR
>> Installation failed.
>> See 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck/00install.out' for details.
>>
>> And the 00install.out file:
>>
>> * installing *source* package 'cudasize' ...
>>
>> ** libs
>>
>>
>>
>> *** arch - i386
>>
>> cygwin warning:
>> MS-DOS style path detected: c:/PROGRA~1/R/R-30~1.1/etc/i386/Makeconf
>> Preferred POSIX equivalent is: /cygdrive/c/PROGRA~1/R/R-30~1.1/etc/i386/Makeconf
>> CYGWIN environment variable option "nodosfilewarning" turns off this warning.
>> Consult the user's guide for more details about POSIX paths:
>> http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
>> cygwin warning:
>> MS-DOS style path detected: c:/PROGRA~1/R/R-30~1.1/etc/i386/Makeconf
>> Preferred POSIX equivalent is: /cygdrive/c/PROGRA~1/R/R-30~1.1/etc/i386/Makeconf
>> CYGWIN environment variable option "nodosfilewarning" turns off this warning.
>> Consult the user's guide for more details about POSIX paths:
>> http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
>> make: `symbols.rds' is up to date.
>> ERROR: compilation failed for package 'cudasize'
>>
>> * removing 'c:/PROGRA~1/R/R-3.0.1/bin/i386/cudasize.Rcheck/cudasize'
>>
>>
>>
>> I've been experimenting with the Makeconf file, but to no avail.
>>
>>
>>
>> Does anyone have any suggestions, please?
>>
>>
>>
>> Thanks,
>>
>> Erin
>>
>>
>>
>> [[alternative HTML version deleted]]
>>
>> ______________________________________________
>> R-devel at r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>
>
>
> --
> Brian D. Ripley, ripley at stats.ox.ac.uk
> Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
> University of Oxford, Tel: +44 1865 272861 (self)
> 1 South Parks Road, +44 1865 272866 (PA)
> Oxford OX1 3TG, UK Fax: +44 1865 272595
>
> ______________________________________________
> R-devel at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-devel
>
--
Brian D. Ripley, ripley at stats.ox.ac.uk
Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
University of Oxford, Tel: +44 1865 272861 (self)
1 South Parks Road, +44 1865 272866 (PA)
Oxford OX1 3TG, UK Fax: +44 1865 272595
More information about the R-devel
mailing list