[Rd] How to create vignette.pdf for R-2.13.0?
Prof Brian Ripley
ripley at stats.ox.ac.uk
Mon May 2 07:08:26 CEST 2011
On Sun, 1 May 2011, Duncan Murdoch wrote:
> On 11-05-01 4:10 PM, cstrato wrote:
>> Dear Duncan, dear Uwe,
>>
>> Since I have installed both WinXP and OpenSUSE 11.3 on my Mac in a
>> virtual machine, I have now done the following tests on all three
>> architectures:
>>
>> 1, R CMD build xps:
>> This creates "xps_1.13.1.tar.gz" which DOES contain all vignettes as
>> pdf-file. Thus R CMD build is ok.
>>
>> 2, R CMD check xps:
>> This does NOT build the vignettes as pdf-files on all three
>> architectures. Or to be more precise, R-2.13.0 does no longer build the
>> vignettes since with R-2.12.2 and earlier versions R did create the
>> vignettes as pdf-files.
>>
>> Thus the question is:
>> Why does R CMD check no longer create the vignettes?
>
> Probably the answer is simply "because it doesn't". For a truly reliable
> check, you should build the package, then check the tar.gz file. Anything
> else is, and always has been, an approximation.
Actually, it does. What earlier versions never did (despite
'cstrato's repeated delusional claims earlier) was to create the
vignettes *in <pkg>inst/doc*. All of them re-created (by default)
vignettes in a working directory. The difference is that 2.13.0
deletes that working directory if the test was successful, whereas
earlier versions left the results somewhere in <pkg>.Rcheck (the
'somewhere' has varied). However, earier versions of R CMD check
sometimes failed when R CMD build succeeded
Using Animal (a small CRAN package with one vignette).
R 2.12.2 gave
* checking package vignettes in ‘inst/doc’ ... WARNING
Package vignettes without corresponding PDF:
/tmp/Animal/inst/doc/Animal.Rnw
and the vignette was re-created in Animal.Rcheck/inst/doc.
R 2.13.0 gives
* checking package vignettes in ‘inst/doc’ ... WARNING
Package vignette(s) without corresponding PDF:
Animal.Rnw
Non-ASCII package vignette(s) without specified encoding:
Animal.Rnw
* checking running R code from vignettes ... OK
* checking re-building of vignettes ... OK
and the working directory was Animal.Rcheck/vign_test .
The main reason for cleaning up is that to mimic R CMD build the
test has to make a complete copy of the package sources, and that adds
up: checking CRAN already takes 17GB for each flavour.
>
> Duncan Murdoch
>
>
>>
>> Best regards
>> Christian
>>
>>
>> On 4/27/11 10:16 AM, Uwe Ligges wrote:
>>>
>>>
>>> On 26.04.2011 21:58, cstrato wrote:
>>>> Dear Duncan, dear Uwe,
>>>>
>>>> Just now I have re-run everything, and today xps.Rnw can be converted to
>>>> a vignette w/o any problems using:
>>>> a, buildVignettes("xps", dir="/Volumes/CoreData/CRAN/xps", quiet=F)
>>>> b, R CMD Sweave xps.Rnw
>>>>
>>>> In both cases the vignette xps.pdf is created (maybe my Mac did not like
>>>> to work during eastern holidays).
>>>>
>>>> However, one issue remains:
>>>> "R64 CMD check xps_1.13.1.tar.gz" no longer creates any pdf files for
>>>> the vignettes.
>>>
>>>
>>> Dioes it give an error or warning? It should check the code. R CMD build
>>> creates the pdf files.
>>>
>>> Uwe Ligges
>>>
>>>>
>>>> Best regards
>>>> Christian
>>>>
>>>>
>>>> On 4/25/11 9:31 PM, Duncan Murdoch wrote:
>>>>> On 25/04/2011 3:16 PM, cstrato wrote:
>>>>>> Thank you.
>>>>>>
>>>>>> My problem seems to be that at the moment the problem can be seen only
>>>>>> on my Mac, since e.g. the Bioconductor servers have no problems
>>>>>> creating
>>>>>> the vignettes.
>>>>>
>>>>> Then you are definitely the one in the best position to diagnose the
>>>>> problem. Use the usual approach: simplify it by cutting out everything
>>>>> that looks unrelated. Verify that the problem still exists, then cut
>>>>> some more. Eventually you'll have isolated the error to a particular
>>>>> small snippet of code, and then you can add print() statements, or use
>>>>> trace(), or do whatever is necessary to see what's so special about your
>>>>> system.
>>>>>
>>>>> I suspect it will turn out to be an assumption in the code that is not
>>>>> true on your system.
>>>>>
>>>>> If the assumption is being made by code you wrote, then fix it. If it's
>>>>> being made by R, let us know.
>>>>>
>>>>> Duncan Murdoch
>>>>>
>>>>>>
>>>>>> Best regards
>>>>>> Christian
>>>>>>
>>>>>> On 4/25/11 8:55 PM, Duncan Murdoch wrote:
>>>>>>> cstrato wrote:
>>>>>>>> Dear Duncan,
>>>>>>>>
>>>>>>>> Thank you for your example, however it is different since it does not
>>>>>>>> use x and y. What about print(x+y)?
>>>>>>>
>>>>>>> Try it.
>>>>>>>
>>>>>>>>
>>>>>>>> Sorry, I do not believe that there is a bug in my code, since:
>>>>>>>> 1, it worked in all versions from R starting with R-2.6.0 till
>>>>>>>> R-2.12.2.
>>>>>>>> 2, the identical code works in the examples
>>>>>>>> 3, this code (or a similar code) is the starting code which all users
>>>>>>>> of xps have to use, and there was never a problem.
>>>>>>>
>>>>>>> This might be a problem in R, or might be a problem in your code. As
>>>>>>> far
>>>>>>> as I know, it has only shown up in your code, so I'd guess that's
>>>>>>> where
>>>>>>> the problem is. In any case, you're the one in the best position to
>>>>>>> isolate it and debug it.
>>>>>>>
>>>>>>> If it turns out to be a problem in R, put together an example
>>>>>>> illustrating the problem that doesn't involve your code, and I'll
>>>>>>> take a
>>>>>>> look.
>>>>>>>
>>>>>>> Duncan Murdoch
>>>>>>>
>>>>>>>>
>>>>>>>> Maybe the reason could be that my code has to import
>>>>>>>> - the CEL-files from the package dir
>>>>>>>> - the file SchemeTest3.root from the package dir
>>>>>>>> ??
>>>>>>>>
>>>>>>>> Best regards
>>>>>>>> Christian
>>>>>>>>
>>>>>>>> On 4/25/11 8:00 PM, Duncan Murdoch wrote:
>>>>>>>>> cstrato wrote:
>>>>>>>>>> Dear Uwe,
>>>>>>>>>>
>>>>>>>>>> Your suggestion to look at the Sweave manual helped me to solve the
>>>>>>>>>> problem. It seems that in R-2.13.0 every chunk can use the code
>>>>>>>>>> from
>>>>>>>>>> the chunk before but not from an earlier chunk.
>>>>>>>>> I'm either misreading what you wrote, or it's wrong. If I have this
>>>>>>>>> in a
>>>>>>>>> Sweave file:
>>>>>>>>>
>>>>>>>>> <<>>=
>>>>>>>>> x<- 1
>>>>>>>>> @
>>>>>>>>>
>>>>>>>>> <<>>=
>>>>>>>>> y<- 2
>>>>>>>>> @
>>>>>>>>>
>>>>>>>>> <<>>=
>>>>>>>>> print(x)
>>>>>>>>> @
>>>>>>>>>
>>>>>>>>> I will see the value of x getting printed, even though it came from
>>>>>>>>> two
>>>>>>>>> chunks earlier.
>>>>>>>>>
>>>>>>>>> I think Uwe is right: there is some bug in the code you're running.
>>>>>>>>> Sweave isn't the problem.
>>>>>>>>>
>>>>>>>>> Duncan Murdoch
>>>>>>>>>
>>>>>>>>>> Concretely, the following does not work since chunk 5 needs the
>>>>>>>>>> code
>>>>>>>>>> from chunk 3 and 4:
>>>>>>>>>>
>>>>>>>>>> ###################################################
>>>>>>>>>> ### chunk number 3:
>>>>>>>>>> ###################################################
>>>>>>>>>> #line 126 "xps.Rnw"
>>>>>>>>>> celdir<- file.path(.path.package("xps"), "raw")
>>>>>>>>>>
>>>>>>>>>> ###################################################
>>>>>>>>>> ### chunk number 4:
>>>>>>>>>> ###################################################
>>>>>>>>>> #line 132 "xps.Rnw"
>>>>>>>>>> scheme.test3<- root.scheme(file.path(.path.package("xps"),
>>>>>>>>>> "schemes",
>>>>>>>>>> "SchemeTest3.root"))
>>>>>>>>>>
>>>>>>>>>> ###################################################
>>>>>>>>>> ### chunk number 5:
>>>>>>>>>> ###################################################
>>>>>>>>>> #line 137 "xps.Rnw"
>>>>>>>>>> celfiles<- c("TestA1.CEL","TestA2.CEL")
>>>>>>>>>> data.test3<- import.data(scheme.test3, "tmpdt_DataTest3",
>>>>>>>>>> celdir=celdir, celfiles=celfiles, verbose=FALSE)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> However, when I add "celdir" to chunk 5 then everything works since
>>>>>>>>>> now chunk 5 needs only the code from chunk 4 but not from chunk 3:
>>>>>>>>>>
>>>>>>>>>> ###################################################
>>>>>>>>>> ### chunk number 5:
>>>>>>>>>> ###################################################
>>>>>>>>>> #line 137 "xps.Rnw"
>>>>>>>>>> celdir<- file.path(.path.package("xps"), "raw")
>>>>>>>>>> celfiles<- c("TestA1.CEL","TestA2.CEL")
>>>>>>>>>> data.test3<- import.data(scheme.test3, "tmpdt_DataTest3",
>>>>>>>>>> celdir=celdir, celfiles=celfiles, verbose=FALSE)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Now buildVignettes() is able to create the vignettes, however R CMD
>>>>>>>>>> check still does not build the vignettes.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Yes, I get a Warning in both cases:
>>>>>>>>>> * checking package vignettes in 'inst/doc' ... WARNING
>>>>>>>>>> Package vignettes without corresponding PDF: ........
>>>>>>>>>>
>>>>>>>>>> However, with R-2.12.2 the following lines are added:
>>>>>>>>>>
>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/APTvsXPS.Rnw
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xps.Rnw
>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xpsClasses.Rnw
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xpsPreprocess.Rnw
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> and in xps.Rcheck the subdirectory "inst/doc" will be created which
>>>>>>>>>> contains the vignette data such as xps.Rnw, but also xps.tex and
>>>>>>>>>> xps.pdf.
>>>>>>>>>>
>>>>>>>>>> In contrast, R-2.13.0 does not create the subdirectory "inst/doc"
>>>>>>>>>> and
>>>>>>>>>> no vignettes are built.
>>>>>>>>>>
>>>>>>>>>> One more issue:
>>>>>>>>>> In contrast to my former believe R CMD INSTALL does not build the
>>>>>>>>>> vignettes, neither in R-2.12.2 nor in R-2.13.0. I have to run
>>>>>>>>>> buildVignettes() after installation. Is this the usual case?
>>>>>>>>>>
>>>>>>>>>> Best regards
>>>>>>>>>> Christian
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 4/25/11 4:00 PM, Uwe Ligges wrote:
>>>>>>>>>>> On 24.04.2011 23:10, cstrato wrote:
>>>>>>>>>>>> Dear Uwe,
>>>>>>>>>>>>
>>>>>>>>>>>> On 4/24/11 10:37 PM, Uwe Ligges wrote:
>>>>>>>>>>>>> On 24.04.2011 20:59, cstrato wrote:
>>>>>>>>>>>>>> Dear Uwe,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you for your reply.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ad 2, Yes, i know that "xps-manual.pdf" is the collection of
>>>>>>>>>>>>>> help
>>>>>>>>>>>>>> pages,
>>>>>>>>>>>>>> I have mentioned it only to show that creating pdf-files does
>>>>>>>>>>>>>> work
>>>>>>>>>>>>>> for
>>>>>>>>>>>>>> R-2.13.0.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ad 1, Could it be that this is a Mac-specific problem since I
>>>>>>>>>>>>>> see
>>>>>>>>>>>>>> it on
>>>>>>>>>>>>>> both my old MacBook Pro and my new Mac Mini.
>>>>>>>>>>>>> Have you tried on any other OS? I did not since installing
>>>>>>>>>>>>> root is
>>>>>>>>>>>>> a bit
>>>>>>>>>>>>> too much effort.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> No, until now I did not try another OS, but I will, since xps
>>>>>>>>>>>> has to
>>>>>>>>>>>> work on all three OSes.
>>>>>>>>>>>>
>>>>>>>>>>>>>> Using R CMD check with R-2.12.2 I get:
>>>>>>>>>>>>> I thought we are talking about R-2.13.0?
>>>>>>>>>>>>>
>>>>>>>>>>>> I showed you the output of R-2.12.2 first and then the output of
>>>>>>>>>>>> R-2.13.0, so that you can see that on the same machine with the
>>>>>>>>>>>> same
>>>>>>>>>>>> file it works with one version but not the other.
>>>>>>>>>>> But you got a Warning in both cases:
>>>>>>>>>>> * checking package vignettes in 'inst/doc' ... WARNING
>>>>>>>>>>> Package vignettes without corresponding PDF: ........
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>> Where is the R CMD build output (since R CMD build is
>>>>>>>>>>>>> supposed to
>>>>>>>>>>>>> prepare the vignette).
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ R64 CMD check xps_1.13.1.tar.gz
>>>>>>>>>>>>>> * using log directory '/Volumes/CoreData/CRAN/xps.Rcheck'
>>>>>>>>>>>>>> * using R version 2.12.2 (2011-02-25)
>>>>>>>>>>>>>> * using platform: x86_64-apple-darwin9.8.0 (64-bit)
>>>>>>>>>>>>>> * using session charset: ASCII
>>>>>>>>>>>>>> * checking for file 'xps/DESCRIPTION' ... OK
>>>>>>>>>>>>>> * this is package 'xps' version '1.13.1'
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>> * checking package vignettes in 'inst/doc' ... WARNING
>>>>>>>>>>>>>> Package vignettes without corresponding PDF:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/APTvsXPS.Rnw
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xps.Rnw
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xpsClasses.Rnw
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /Volumes/CoreData/CRAN/xps.Rcheck/00_pkg_src/xps/inst/doc/xpsPreprocess.Rnw
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> * checking PDF version of manual ... OK
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Using "RSwitch.app" I switch to R-2.13.0, but now I get:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ R64 CMD check xps_1.13.1.tar.gz
>>>>>>>>>>>>>> * using log directory '/Volumes/CoreData/CRAN/xps.Rcheck'
>>>>>>>>>>>>>> * using R version 2.13.0 (2011-04-13)
>>>>>>>>>>>>>> * using platform: x86_64-apple-darwin9.8.0 (64-bit)
>>>>>>>>>>>>>> * using session charset: ASCII
>>>>>>>>>>>>>> * checking for file 'xps/DESCRIPTION' ... OK
>>>>>>>>>>>>>> * this is package 'xps' version '1.13.1'
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>> * checking package vignettes in 'inst/doc' ... WARNING
>>>>>>>>>>>>>> Package vignette(s) without corresponding PDF:
>>>>>>>>>>>>>> APTvsXPS.Rnw
>>>>>>>>>>>>>> xps.Rnw
>>>>>>>>>>>>>> xpsClasses.Rnw
>>>>>>>>>>>>>> xpsPreprocess.Rnw
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> * checking running R code from vignettes ... OK
>>>>>>>>>>>>>> * checking re-building of vignettes ... OK
>>>>>>>>>>>>>> * checking PDF version of manual ... OK
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I must admit that I have never built the vignettes manually,
>>>>>>>>>>>>>> and I
>>>>>>>>>>>>>> cannot find a hint how I can do it from the command line. Is
>>>>>>>>>>>>>> this
>>>>>>>>>>>>>> possible?
>>>>>>>>>>>> Is it possible to build the vignettes from the command line?
>>>>>>>>>>> R --help suggests there is
>>>>>>>>>>> R CMD Sweave .....
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>> However, building the vignettes within R-2.13.0 I get:
>>>>>>>>>>>>>>> library(tools)
>>>>>>>>>>>>>>> buildVignettes("xps", dir="/Volumes/CoreData/CRAN/xps",
>>>>>>>>>>>>>>> quiet=F)
>>>>>>>>>>>>>> Overfull \vbox (21.68121pt too high) has occurred while
>>>>>>>>>>>>>> \output is
>>>>>>>>>>>>>> Writing to file xps.tex
>>>>>>>>>>>>>> Processing code chunks with options ...
>>>>>>>>>>>>>> 1 : term verbatim
>>>>>>>>>>>>>> 2 : echo term hide
>>>>>>>>>>>>>> 3 : echo term verbatim
>>>>>>>>>>>>>> 4 : echo term verbatim
>>>>>>>>>>>>>> 5 : echo term verbatim
>>>>>>>>>>>>>> SysError in<TFile::TFile>: file
>>>>>>>>>>>>>> /tmpdt_DataTest3_cel.root/tmpdt_DataTest3_cel_20110424_201301.root
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> can
>>>>>>>>>>>>>> not be opened (No such file or directory)
>>>>>>>>>>>>>> Error: Could not create file</tmpdt_DataTest3_cel.root>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Here are the two important chunks 4 and 5, which work fine with
>>>>>>>>>>>>>> R-2.12.2
>>>>>>>>>>>>>> and earlier versions:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> ### chunk number 4:
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> #line 132 "xps.Rnw"
>>>>>>>>>>>>>> scheme.test3<- root.scheme(file.path(.path.package("xps"),
>>>>>>>>>>>>>> "schemes",
>>>>>>>>>>>>>> "SchemeTest3.root"))
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> ### chunk number 5:
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> #line 137 "xps.Rnw"
>>>>>>>>>>>>>> celfiles<- c("TestA1.CEL","TestA2.CEL")
>>>>>>>>>>>>>> data.test3<- import.data(scheme.test3, "tmpdt_DataTest3",
>>>>>>>>>>>>>> celdir=celdir, celfiles=celfiles, verbose=FALSE)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> However, in R-2.13.0 chunk 5 crashes!!!
>>>>>>>>>>>>>> It works only when replacing chunk 5 with:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> ### chunk number 5:
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> #line 137 "xps.Rnw"
>>>>>>>>>>>>>> celfiles<- c("TestA1.CEL","TestA2.CEL")
>>>>>>>>>>>>>> scheme.test3<- root.scheme(file.path(.path.package("xps"),
>>>>>>>>>>>>>> "schemes",
>>>>>>>>>>>>>> "SchemeTest3.root"))
>>>>>>>>>>>>>> data.test3<- import.data(scheme.test3, "tmpdt_DataTest3",
>>>>>>>>>>>>>> celdir=celdir, celfiles=celfiles, verbose=FALSE)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> As you see R-2.13.0 does no longer remember the result of
>>>>>>>>>>>>>> chunk 4,
>>>>>>>>>>>>>> i.e.
>>>>>>>>>>>>>> "scheme.test3". Now I have to include the line defining
>>>>>>>>>>>>>> "scheme.test3"
>>>>>>>>>>>>>> also in chunk 5.
>>>>>>>>>>>>> How objects generated in one chunk can be reused later on is
>>>>>>>>>>>>> explained
>>>>>>>>>>>>> in the Sweave manual.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Do you have any idea for this behavior?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> An example, which does work in R-2.13.0 are the following two
>>>>>>>>>>>>>> chunks:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #################################################
>>>>>>>>>>>>>> ### chunk number 20:
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> #line 300 "xps.Rnw"
>>>>>>>>>>>>>> library(xps)
>>>>>>>>>>>>>> scheme.test3<- root.scheme(file.path(.path.package("xps"),
>>>>>>>>>>>>>> "schemes",
>>>>>>>>>>>>>> "SchemeTest3.root"))
>>>>>>>>>>>>>> data.test3<- root.data(scheme.test3,
>>>>>>>>>>>>>> file.path(.path.package("xps"),"rootdata",
>>>>>>>>>>>>>> "DataTest3_cel.root"))
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> ### chunk number 21:
>>>>>>>>>>>>>> ###################################################
>>>>>>>>>>>>>> #line 318 "xps.Rnw"
>>>>>>>>>>>>>> data.rma<- rma(data.test3, "tmpdt_Test3RMA", verbose=FALSE)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> In summary it is not quite clear to me what has changed in
>>>>>>>>>>>>>> R-2.13.0 so
>>>>>>>>>>>>>> that chunk 5 no longer works.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> BTW, the error:
>>>>>>>>>>>>>> SysError in<TFile::TFile>: file
>>>>>>>>>>>>>> /tmpdt_DataTest3_cel.root/tmpdt_DataTest3_cel_20110424_201301.root
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> can
>>>>>>>>>>>>>> not be opened
>>>>>>>>>>>>>> is not clear to me since "/tmpdt_DataTest3_cel.root/" is
>>>>>>>>>>>>>> definitively
>>>>>>>>>>>>>> NOT a directory.
>>>>>>>>>>>>> Time to debug what root.scheme is doing with the supplied path.
>>>>>>>>>>>>>
>>>>>>>>>>>> Sorry, I do not understand what you mean. root.scheme does not
>>>>>>>>>>>> change
>>>>>>>>>>>> the path, otherwise it would not work on all older versions of R.
>>>>>>>>>>> Right, but since something changed obviously, and you tell us the
>>>>>>>>>>> path
>>>>>>>>>>> is not a path, it might be a function used by root.scheme ....
>>>>>>>>>>> That's
>>>>>>>>>>> why I said time to debug the code in your vignette!
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>> Do you have any ideas?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Please note that the vignette "xps.Rnw" did work for the last
>>>>>>>>>>>>>> two
>>>>>>>>>>>>>> years
>>>>>>>>>>>>>> w/o problem. Furthermore, the Bioconductor servers are able to
>>>>>>>>>>>>>> build
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> vignette, see:
>>>>>>>>>>>>>> http://www.bioconductor.org/packages/release/bioc/html/xps.html
>>>>>>>>>>>>> See
>>>>>>>>>>>>> http://bioconductor.org/checkResults/2.8/bioc-20110225/xps/liverpool-checksrc.html
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> and find that their Mac Servers are also fine with it. So maybe
>>>>>>>>>>>>> it is
>>>>>>>>>>>>> your setup that is corrupted?
>>>>>>>>>>>> Maybe, you are right that my setup is corrupted, but on two
>>>>>>>>>>>> independent
>>>>>>>>>>>> machines?
>>>>>>>>>>>>
>>>>>>>>>>>> Maybe the download of "R-2.13.0.pkg" is corrupted, but then
>>>>>>>>>>>> nothing
>>>>>>>>>>>> should work, or am I wrong?
>>>>>>>>>>>>
>>>>>>>>>>>> How can I check if my setup is corrupted?
>>>>>>>>>>> By debugging the code in your package's vignette.
>>>>>>>>>>>
>>>>>>>>>>> Uwe Ligges
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Best regards
>>>>>>>>>>>> Christian
>>>>>>>>>>>>
>>>>>>>>>>>>> Best wishes,
>>>>>>>>>>>>> Uwe
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Best regards
>>>>>>>>>>>>>> Christian
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 4/24/11 4:12 PM, Uwe Ligges wrote:
>>>>>>>>>>>>>>> On 23.04.2011 21:50, cstrato wrote:
>>>>>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> While R CMD check and R CMD INSTALL have always created the
>>>>>>>>>>>>>>>> vignettes on
>>>>>>>>>>>>>>>> R-2.12.1 or any earlier versions of R, I am no longer able to
>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> vignettes on R-2.13.0.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Instead R CMD check gives me the following output:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> * checking for unstated dependencies in vignettes ... OK
>>>>>>>>>>>>>>>> * checking package vignettes in 'inst/doc' ... WARNING
>>>>>>>>>>>>>>>> Package vignette(s) without corresponding PDF:
>>>>>>>>>>>>>>>> APTvsXPS.Rnw
>>>>>>>>>>>>>>>> xps.Rnw
>>>>>>>>>>>>>>>> xpsClasses.Rnw
>>>>>>>>>>>>>>>> xpsPreprocess.Rnw
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> * checking running R code from vignettes ... OK
>>>>>>>>>>>>>>>> * checking re-building of vignettes ... OK
>>>>>>>>>>>>>>>> * checking PDF version of manual ... OK
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Does someone know what the reason might be?
>>>>>>>>>>>>>>> No, it does for me for other packages.
>>>>>>>>>>>>>>> Perhaps an error when processing the vignettes? Have you
>>>>>>>>>>>>>>> tried to
>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>> them manually?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> (R64 CMD check --help says that be default
>>>>>>>>>>>>>>>> rebuild-vignettes is
>>>>>>>>>>>>>>>> turned
>>>>>>>>>>>>>>>> on.)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Interestingly, R CMD check still creates the file
>>>>>>>>>>>>>>>> "xps-manual.pdf".
>>>>>>>>>>>>>>> That is the collection of help pages, unrelated to the
>>>>>>>>>>>>>>> vignette.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Uwe Ligges
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Here is my sessionInfo:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> sessionInfo()
>>>>>>>>>>>>>>>> R version 2.13.0 (2011-04-13)
>>>>>>>>>>>>>>>> Platform: x86_64-apple-darwin9.8.0/x86_64 (64-bit)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> locale:
>>>>>>>>>>>>>>>> [1] C
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> attached base packages:
>>>>>>>>>>>>>>>> [1] stats graphics grDevices utils datasets methods base
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> other attached packages:
>>>>>>>>>>>>>>>> [1] xps_1.13.1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> loaded via a namespace (and not attached):
>>>>>>>>>>>>>>>> [1] Biobase_2.12.1 Biostrings_2.20.0 IRanges_1.10.0
>>>>>>>>>>>>>>>> [4] affy_1.30.0 affyPLM_1.28.5 affyio_1.20.0
>>>>>>>>>>>>>>>> [7] preprocessCore_1.14.0
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thank you in advance.
>>>>>>>>>>>>>>>> Best regards
>>>>>>>>>>>>>>>> Christian
>>>>>>>>>>>>>>>> _._._._._._._._._._._._._._._._._._
>>>>>>>>>>>>>>>> C.h.r.i.s.t.i.a.n S.t.r.a.t.o.w.a
>>>>>>>>>>>>>>>> V.i.e.n.n.a A.u.s.t.r.i.a
>>>>>>>>>>>>>>>> e.m.a.i.l: cstrato at aon.at
>>>>>>>>>>>>>>>> _._._._._._._._._._._._._._._._._._
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ______________________________________________
>>>>>>>>>>>>>>>> R-devel at r-project.org mailing list
>>>>>>>>>>>>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>>>>>>>>> ______________________________________________
>>>>>>>>>>>>>> R-devel at r-project.org mailing list
>>>>>>>>>>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>>>>> ______________________________________________
>>>>>>>>>> R-devel at r-project.org mailing list
>>>>>>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>
>
> ______________________________________________
> R-devel at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-devel
>
--
Brian D. Ripley, ripley at stats.ox.ac.uk
Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
University of Oxford, Tel: +44 1865 272861 (self)
1 South Parks Road, +44 1865 272866 (PA)
Oxford OX1 3TG, UK Fax: +44 1865 272595
More information about the R-devel
mailing list