[Rd] R-2.12.0 hangs while loading RGtk2 on FreeBSD
Rainer Hurling
rhurlin at gwdg.de
Wed Oct 27 21:09:07 CEST 2010
On 27.10.2010 15:07 (UTC+1), Michael Lawrence wrote:
> On Sat, Oct 23, 2010 at 2:49 AM, Rainer Hurling <rhurlin at gwdg.de
> <mailto:rhurlin at gwdg.de>> wrote:
> On 22.10.2010 22:10 (UTC+1), Rainer Hurling wrote:
> On 22.10.2010 16:18 (UTC+2), Rainer Hurling wrote:
> On 22.10.2010 14:57 (UTC+1), Michael Lawrence wrote:
>
> On Thu, Oct 21, 2010 at 9:42 AM, Rainer Hurling
> <rhurlin at gwdg.de <mailto:rhurlin at gwdg.de>
> <mailto:rhurlin at gwdg.de <mailto:rhurlin at gwdg.de>>> wrote:
>
> [moved from R-help]
>
> On 21.10.2010 18:09 (UTC+1), Prof Brian Ripley wrote:
>
> If you do R CMD INSTALL --no-test-load this will skip
> the part
> that is
> hanging and you can try loading in stages (e.g. dyn.load
> on the
> RGtk2.so).
>
> With '--no-test-load' it installs and ends normal.
> Loading per
> dyn.load("RGtk2.so") works, just as
> dyn.load("RGtk2.so",F) and
> dyn.load("RGtk2.so",,F). Unloading works, too.
>
> Normal loading over library(RGtk2) within R does not
> work. R than is
> hanging.
>
> It seems the problem is not with the library itself?
>
> It looks like something is happening when initializing
> GTK+ and the
> event loop. This happens in the function R_gtkInit in
> Rgtk.c. If you
> could run R -d gdb and break on that function, perhaps
> you could step
> through until it hangs.
>
> Michael, thank you for answering. As I wrote earlier (on
> R-help@),
> unfortunately I have no experience with debugging (I am not a
> programmer). So I would need some more assistence.
>
> Is there a difference between 'library(RGtk2)' and
> 'dyn.load(RGtk2)' in
> initializing GTK+? I am able to dyn.load, but library does
> not work.
>
> After starting with 'R -d gdb' is the following right?
>
> (gdb) break R_gtkInit
> Function "R_gtkInit" not defined.
> Make breakpoint pending on future shared library load? (y or
> [n]) y
> Breakpoint 1 (R_gtkInit) pending.
>
> When I try to proceed, it gives me the following message
>
> (gdb) run
> Starting program: /usr/local/lib/R/bin/exec/R
> /libexec/ld-elf.so.1: Shared object "libRblas.so" not found,
> required by "R"
> Program exited with code 01.
>
> Ok, I am one step further now:
>
> (gdb) run
> Starting program: /usr/local/lib/R/bin/exec/R
> [..SNIP..]
> > library(RGtk2)
> [New LWP 100174]
> Breakpoint 2 at 0x318bd490: file Rgtk.c, line 104.
> Pending breakpoint "R_gtkInit" resolved
> [New Thread 2f408b00 (LWP 100174)]
> [Switching to Thread 2f408b00 (LWP 100174)]
>
> Breakpoint 2, R_gtkInit (rargc=0x30b11d10, rargv=0x30a98458,
> success=0x30afbad0) at Rgtk.c:104
> 104 Rgtk.c: No such file or directory.
> in Rgtk.c
> (gdb)
>
> What do you suggest I should do next?
>
> Rgtk.c was not found from gdb because RGtk2 was not build with
> DEBUG=T and R_KEEP_PKG_SOURCE=yes.
>
> So this is the next try. I can trace the code until it hangs:
>
> library(RGtk2)
> [New LWP 100250]
> Breakpoint 2 at 0x458bd490: file Rgtk.c, line 104.
>
> Pending breakpoint "R_gtkInit" resolved
> [New Thread 4322ef00 (LWP 100250)]
> [Switching to Thread 4322ef00 (LWP 100250)]
>
> Breakpoint 2, R_gtkInit (rargc=0x446d0980, rargv=0x44698618,
> success=0x446d09e0) at Rgtk.c:104
> 104 {
> (gdb) n
> 107 argc = (int) *rargc;
> (gdb) n
> 104 {
> (gdb) n
> 107 argc = (int) *rargc;
> (gdb) n
> 109 if (!gdk_display_get_default()) {
> (gdb) n
> 110 gtk_disable_setlocale();
> (gdb) n
> 111 if (!gtk_init_check(&argc, &rargv)) {
> (gdb) n
> 121 if (!GDK_DISPLAY()) {
> (gdb) n
> 127 addInputHandler(R_InputHandlers,
> ConnectionNumber(GDK_DISPLAY()),
> (gdb) n
> 132 if (!pipe(fds)) {
> (gdb) n
> 133 ifd = fds[0];
> (gdb) n
> 134 ofd = fds[1];
> (gdb) n
> 135 addInputHandler(R_InputHandlers, ifd,
> R_gtk_timerInputHandler, 32);
> (gdb) n
> 133 ifd = fds[0];
> (gdb) n
> 134 ofd = fds[1];
> (gdb) n
> 135 addInputHandler(R_InputHandlers, ifd,
> R_gtk_timerInputHandler, 32);
> (gdb) n
> 136 if (!g_thread_supported ()) g_thread_init (NULL);
> (gdb) n
> 137 g_thread_create(R_gtk_timerThreadFunc, NULL, FALSE, NULL);
> (gdb) n
>
> Line 138 (R_CStackLimit = -1;) is hanging. It seems there is
> something wrong with piping the file descriptor?
>
> Thanks for looking into this. It looks like the g_thread_create line is
> hanging. I wonder if your version of GTK+/GLib is not built with
> threading support? But if that were the case, g_thread_init() should
> have aborted. You could try breaking on the R_gtk_timerThreadFunc just
> to see if the thread is executed at all or where it is hanging.
Michael, I have to thank you :-) I set a break at
'R_gtk_timerThreadFunc'. It seems this function does not return:
[..see above..]
library(RGtk2)
[New LWP 100172]
Breakpoint 2 at 0x458bd5c0: file Rgtk.c, line 78.
Pending breakpoint "R_gtk_timerThreadFunc" resolved
[New Thread 4322ef00 (LWP 100172)]
[..hanging from here on..]
Next I tried a new run with break at 'g_main_context_new' (line 79),
which steps into glib-2.0.so.0, before it hangs:
library(RGtk2)
[New LWP 100195]
Breakpoint 2 at 0x47c7c660
Pending breakpoint "g_main_context_new" resolved
[New Thread 4322ef00 (LWP 100195)]
[Switching to Thread 4322ef00 (LWP 100195)]
Breakpoint 2, 0x0000000047c7c660 in g_main_context_new () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_main_context_new,
which has no line number information.
0x0000000047c7aed0 in g_source_set_priority () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_set_priority,
which has no line number information.
0x0000000047c7ac70 in g_main_loop_quit () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_main_loop_quit,
which has no line number information.
0x0000000047c7a280 in g_source_get_context () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_get_context,
which has no line number information.
0x0000000047c7c6f3 in g_main_context_new () from
/usr/local/lib/libglib-2.0.so.0
(gdb) p ctx
No symbol "ctx" in current context.
(gdb) p data
No symbol "data" in current context.
(gdb) n
Single stepping until exit from function g_main_context_new,
which has no line number information.
0x0000000047c7c8b2 in g_main_context_default () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_main_context_default,
which has no line number information.
0x0000000047c7dea5 in g_source_attach () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_attach,
which has no line number information.
0x0000000047c79c50 in g_list_remove_link () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_list_remove_link,
which has no line number information.
0x0000000047c7dde6 in g_source_attach () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_attach,
which has no line number information.
0x0000000047c7ac70 in g_main_loop_quit () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_main_loop_quit,
which has no line number information.
0x0000000047c7a280 in g_source_get_context () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_get_context,
which has no line number information.
0x0000000047c7de00 in g_source_attach () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_attach,
which has no line number information.
0x0000000047c7a280 in g_source_get_context () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_get_context,
which has no line number information.
0x0000000047c7de11 in g_source_attach () from
/usr/local/lib/libglib-2.0.so.0
(gdb) n
Single stepping until exit from function g_source_attach,
which has no line number information.
0x000000004608eec8 in gdk_add_client_message_filter () from
/usr/local/lib/libgdk-x11-2.0.so.0
(gdb) n
Single stepping until exit from function gdk_add_client_message_filter,
which has no line number information.
[..hanging from here on..]
Is there an easy way to find out if GTK+/GLib is built with threading
support?
Thanks, Rainer
> Thanks again for taking the time to work on this. Sorry I have been
> non-responsive.
>
> Michael
[..mail deleted from here on..]
More information about the R-devel
mailing list