[Rd] os x crash using rpanel and tcltk (PR#10495)

Fri Dec 7 15:35:11 CET 2007

Here's the back trace i get after it crashes:

Program received signal SIGTRAP, Trace/breakpoint trap.
0x90a61b09 in _objc_error ()
(gdb) bt
#0  0x90a61b09 in _objc_error ()
#1  0x90a61b40 in __objc_error ()
#2  0x90a601a0 in _freedHandler ()
#3  0x93442c64 in -[NSDocument close] ()
#4  0x00015f0b in -[RQuartz close] ()
#5  0x00016c93 in RQuartz_Close ()
#6  0x0039b6dc in removeDevice ()
#7  0x00015f3f in -[RQuartz windowShouldClose:] ()
#8  0x934429b2 in -[NSWindow _document:shouldClose:contextInfo:] ()
#9  0x93442437 in -[NSWindow __close] ()
#10 0x93382dbc in -[NSApplication sendAction:to:from:] ()
#11 0x93382d15 in -[NSControl sendAction:to:] ()
#12 0x93384ec1 in -[NSCell _sendActionFrom:] ()
#13 0x933976a1 in -[NSCell trackMouse:inRect:ofView:untilMouseUp:] ()
#14 0x933b5289 in -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] ()
#15 0x933b4b39 in -[NSControl mouseDown:] ()
#16 0x934422f8 in -[_NSThemeWidget mouseDown:] ()
#17 0x933723e3 in -[NSWindow sendEvent:] ()
#18 0x93364384 in -[NSApplication sendEvent:] ()
#19 0x00005151 in -[RController handleReadConsole:] ()
#20 0x0000c641 in Re_ReadConsole ()
#21 0x00015c76 in run_REngineRmainloop ()
#22 0x0000ec4a in -[REngine runREPL] ()
#23 0x0000226d in main ()

Is this what is wanted?

Thanks for the gdb advice btw. I'm not sure if it's important, but
before it crashed I got lots of warnings similar to the following in
gdb when I attached the tcltk package:

warning: Could not find object file
"/Builds/Rdev-web/QA/Simon/R-build/tiger-ppc/R-2.6-branch/src/extra/blas/bl=
as00.o"
- no debug information available for
"../../../../../R-2.6-branch/src/extra/blas/blas00.c".

Is there an issue with a previous version of R on my machine causing proble=
ms?

Thanks for the help.

Aaron

On 07/12/2007, Aaron Robotham <a.robotham at bristol.ac.uk> wrote:
> The machine in question is a black MacBook, a pretty standard setup
> with the rest of the details as listed in my first post (R 2.6.1 OSX
> 10.4.11). I'll give the back trace a try and let you know the result.
>
> On 06/12/2007, Simon Urbanek <simon.urbanek at r-project.org> wrote:
> >
> > On Dec 6, 2007, at 9:26 AM, Aaron Robotham wrote:
> >
> > > I know of gdb but I'm not certain how to use it with Mac OS X's
> > > R.app, do you just do something like "gdb open R.app" in the
> > > terminal?.
> > >
> >
> > You can attach it once it's running - just type "attach R" in gdb
> > while R is runningm then "c", then let it crash and then "bt".
> >
> > FWIW: I cannot reproduce the problem and I have tried 3 different
> > machines... (you didn't even tell us what machine type this is ...).
> >
> > Cheers,
> > Simon
> >
> >
> > > Interestingly I don't get this crash when I launch the X11 version of
> > > R through the terminal, so this would suggest the bug in question is
> > > to do with the actual Rgui in R.app. Hopefully this information might
> > > help to narrow down the problem. Any advice for using gdb on R.app
> > > would be appreciated, I couldn't find much in the way of guidance whe=
n
> > > searching online.
> > >
> > > thanks
> > >
> > > Aaron
> > >
> > > On 05/12/2007, Peter Dalgaard <p.dalgaard at biostat.ku.dk> wrote:
> > >> a.robotham at bris.ac.uk wrote:
> > >>> Hello,
> > >>> I've recently discovered a persistent issue with rpanel when runnin=
g
> > >>> R.app (2.6.1) on Mac OS X 10.4.11. tcltk and rpanel load without an=
y
> > >>> apparent error, and the interactive panels appear to work as
> > >>> expected,
> > >>> however upon closing the panels rpanel has created I get
> > >>> catastrophic
> > >>> errors and R crashes completely. For the most part R manages to
> > >>> crash
> > >>> with dignity and work can be saved, but sometimes it will crash
> > >>> straight out. Below is an example of an entire work session (only
> > >>> base
> > >>> packages loaded) with the crash at the end typical of those
> > >>> encountered:
> > >>>
> > >>>
> > >>>> library(tcltk)
> > >>>>
> > >>> Loading Tcl/Tk interface ... done
> > >>>
> > >>>> library(rpanel)
> > >>>>
> > >>> Package `rpanel', version 1.0-4
> > >>> type help(rpanel) for summary information
> > >>>
> > >>>> density.draw <- function(panel) {
> > >>>>
> > >>> +   plot(density(panel$x, bw =3D panel$h))
> > >>> +   panel
> > >>> + }
> > >>>
> > >>>> panel <- rp.control(x =3D rnorm(50))
> > >>>> rp.slider(panel, h, 0.5, 5, log =3D TRUE, action =3D density.draw)
> > >>>>
> > >>>
> > >>> *** caught bus error ***
> > >>> address 0x0, cause 'non-existent physical address'
> > >>>
> > >>> Possible actions:
> > >>> 1: abort (with core dump, if enabled)
> > >>> 2: normal R exit
> > >>> 3: exit R without saving workspace
> > >>> 4: exit R saving workspace
> > >>>
> > >>> All packages that are required are up to date, and I can find no
> > >>> evidence of similar issues from searching the mailing lists. Any
> > >>> suggestions would be appreciated.
> > >>>
> > >>>
> > >> Can you run this under gdb? A breakpoint in the error handler and a
> > >> backtrace could be valuable.
> > >>
> > >>> Aaron
> > >>>
> > >>> ______________________________________________
> > >>> R-devel at r-project.org mailing list
> > >>> https://stat.ethz.ch/mailman/listinfo/r-devel
> > >>>
> > >>
> > >>
> > >> --
> > >>   O__  ---- Peter Dalgaard             =D8ster Farimagsgade 5, Entr.=
B
> > >>  c/ /'_ --- Dept. of Biostatistics     PO Box 2099, 1014 Cph. K
> > >> (*) \(*) -- University of Copenhagen   Denmark          Ph:  (+45)
> > >> 35327918
> > >> ~~~~~~~~~~ - (p.dalgaard at biostat.ku.dk)                  FAX: (+45)
> > >> 35327907
> > >>
> > >>
> > >>
> > >>
> > >
> > > ______________________________________________
> > > R-devel at r-project.org mailing list
> > > https://stat.ethz.ch/mailman/listinfo/r-devel
> > >
> > >
> >
> >
> >
>