[ESS] ESS Sweave plug into Auctex problem

[Andreas Kiermeier]

Hi Ottorino,
not that I can shed any light on it (I think), though I have removed
the various pieces of code that got things working a long time ago
(before this functionality was added to ESS).
Instead, I only use ess-swv-toggle-plug-into-AUCTeX-p via customize.
Maybe you want to give this a try and see what happens?
Cheers,
Andreas


On 15 July 2014 19:37, ottorino <ottorino-luca.pantani at unifi.it> wrote:
> Hi all, I'm also experiencing some problems,
> probably related to my obsolete .emacs file
>
> Il giorno mar, 01/07/2014 alle 14.21 +0930, Andreas Kiermeier ha
> scritto:
>
>>
>> I've just struck a little problem with plugging ESS Sweave into AUCTEX.
>>
>> I'm running ESS 14.05 in GNU Emacs 24.3.1 on Windows 8.1.
>
> Here, on
> debian wheezy
> GNU Emacs 23.4.1 (x86_64-pc-linux-gnu, GTK+ Version 2.24.10)
> ESS version 12.04-4
> R version 3.1.0 (2014-04-10) -- "Spring Dance"
>
>> I've set ess-swv-toggle-plug-into-AUCTeX-p to t using customize.
>>
>> When I load a .Rnw file the "AUCTeX Interface" (on the Noweb > Sweaving,
>> Tangling, ... menu) is ticked.  However, Sweave and LatexSweave are not on
>> AUCTeX's Command menu, irrespective of whether R is running or not.
>
> With "AUCTeX Interface" ticked, with  a .Rnw file loaded (not R)
> under "Command" I find, in the order and at the end of the drop-down
> menu,
>
> Sweave
> Stangle
> Sweave
> LatexSweave
> Sweave
> LatexSweave
>
>> Pressing C-c C-c defaults to View (even after making changes to the file).
> Here C-c C-c out of chunks defaults to latex compilation.
> Within chunks send the commands to R (and start it if not present)
>
> EDIT. Not always. The behaviour above is not consistent !!
> Sometimes the minibuffer propose the latex compilation
>
>
>> Typing "Swe [TAB]" results in a "(no match)" in the minibuffer. Typing
>> "Sweave [Enter]" also gives a "(no match)".
> The same beahviour here (ESC x Swe[TAB])
>
>> Activating and de-activating the "AUCTeX Interface" then shows the Sweave
>> and LatexSweave options on AUCTeX's Command menu,
> After doing this at the end of the dropdown menu "Command" I find
>
>
> Stangle
> LatexSweave
> LatexSweave
> Sweave
> Sweave
>
> Re-ticking "AUCTeX Interface", the end of the dropdown menu "Command"
> appears as follows
>
> Stangle
> LatexSweave
> LatexSweave
> Sweave
> Sweave
> Sweave
> Sweave
> LatexSweave
>
> De-ticking again, gets back to
> Stangle
> LatexSweave
> LatexSweave
> Sweave
> Sweave
>
> and then looping in re-ticking and de-ticking results in consistent
> lists.
> ESC x Swe[TAB] still results in "no match "
>
>> and C-c C-c behaves as
>> expected ... it allows me to Sweave.
> Now, Auctex Interface de-ticked, after pressing C-c C-c the minibuffer
> defaults to Sweave
>
>>
>> The behaviour of "M-n s" is unaffected and works / sweaves as expected.
> Also here.
>
> I nevertheless have problems with M-n-P, to produce and see the pdf
> document.
>
> My usual working sequence has always been
>
> M-n-s
> wait R to finish
> M-n-P
> an evince/atril windows appear with the pdf in it
> modify the .Rnw file somehow
> M-n-s
> wait R to finish
> M-n-P
> ...etc
>
> At this point I expected a refresh of the pdf in the evince/atril
> window.
>
> Lately I have the annoyance of a message in the minibuffer
>
> "A command is running.  Kill it? (yes or no) "
>
> The running command  is most probably something related to evince/atril,
> since the message do not appear if I close (each time) the
> evince/atril window.
>
> If I respond "yes" the evince/atril window closes and the pdf reappears
> in a new window.
>
> Here below some relevant lines of my .emacs (badly copied from your
> site, Andreas !!)
>
>
>> Is this working for others? Any thoughts or guidance on what I might be
>> doing wrong would be greatly appreciated.
> I also would appreciate any help.
> Thanks to you all
> Ottorino
>
>
>
> ;;; ==============================================================
> ;;; http://sites.google.com/site/andreaskiermeier/essmaterials
> ;;; added on 9 maggio 2011
> ;;; ==============================================================
> ;;; see also rows 24,38,40 in 3_init_latex.el
> (add-to-list 'auto-mode-alist '("\\.Rnw\\'" . Rnw-mode))
> (add-to-list 'auto-mode-alist '("\\.Snw\\'" . Snw-mode))
> (add-hook 'Rnw-mode-hook
>  (lambda ()
>   (add-to-list 'TeX-expand-list
>    '("%rnw" file "Rnw" t) t)
> ;
>   (add-to-list 'TeX-command-list
>    '("Stangle" "R CMD Stangle %rnw"
>      TeX-run-command nil (latex-mode) :help "Run Stangle") t)
> ;
>   (add-to-list 'TeX-command-list
>   '("Sweave" "R CMD Sweave %rnw"
>      TeX-run-command nil t :help "Run Sweave") t)
>                    ; nil (latex-mode) :help "Run Sweave") t)
> ;
>   (add-to-list 'TeX-command-list
>    '("LatexSweave" "%l \"%(mode)\\input{%s}\""
>      TeX-run-TeX nil t :help "Run Latex after Sweave") t)
>                ; nil (latex-mode) :help "Run Latex after Sweave") t)
> (setq TeX-command-default "Sweave")))
>
>
> ;;; rows 28-40 of 3_init_latex.el
> ;
> (defun my-latex-mode ()
>   (add-to-list 'TeX-command-list '("Sweave" "Sweave.sh -l %s"
> TeX-run-command t t :help "Sweave file and produce DVI") t)
>   (latex-math-mode)
>   (TeX-fold-mode t) ; can hide certain parts (like footnotes,
> references
>                     ; etc.) not often edited
>   (turn-on-reftex)  ; allows RefTeX to interact with AUCTeX
> ;;  (set-face-font 'font-latex-italic-face "lucidasans-italic-12")
> ;;  (set-face-font 'font-latex-bold-face "lucidasans-bold-12")
>   (setq ispell-extra-args '("-t"))
> ;  (define-key LaTeX-math-keymap [?` (?-)] 'LaTeX-math-bar)
> ;  (define-key LaTeX-math-keymap [?` (?e)] 'LaTeX-math-varepsilon)
> (turn-on-auto-fill) ; Breaks automatically lines at 80 columns
> while-u-write
> )
>
> (setq reftex-file-extensions
>       '(("Snw" "Rnw" "nw" "tex" ".tex" ".ltx") ("bib" ".bib")))
> (setq TeX-file-extensions
>       '("Snw" "Rnw" "nw" "tex" "sty" "cls" "ltx" "texi" "texinfo"))
>
> ______________________________________________
> ESS-help at r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/ess-help