metis-5.1.0 ------------------------------------------------------------------------ r13937 | karypis | 2013-03-29 23:08:21 -0500 (Fri, 29 Mar 2013) - Further extended the 2-hop coarsening scheme introduced in 5.0.2 for for graphs with highly variable degree distribution (e.g., power-law). This coarsening scheme is automatically used when the standard 1-hop-based scheme leaves a large fraction of the vertices of the graph unmatched. It leads to better quality partitionings, lower memory utilization, and faster execution time. In principle, this scheme will never be triggered for graphs/matrices appearing in scientific computations derived from FE meshes. However, if you notice that the quality of the solutions is significantly worse, this 2-hop matching can be turned off by using the '-no2hop' command line option and the associated options[] parameter (as described in the manual). - Fixed 0/1 numbering issue with mesh partitioning routines (flyspray issue #109) metis-5.0.3 ------------------------------------------------------------------------ r13822 | karypis | 2013-03-11 14:40:11 -0500 (Mon, 11 Mar 2013) - Fixed the bug that was introduced in 5.x for creating nodal graphs from meshes (flyspray issue #107). - Changed the license to Apache Version 2. metis-5.0.2 ------------------------------------------------------------------------ r10974 | karypis | 2011-10-29 18:24:32 -0500 (Sat, 29 Oct 2011) - Fixed issue with high-degree vertices and mask-based compression. - Fixed issue with wrong COARSENING_FRACTION. - Modified coarsening schemes to better support non FE graphs. metis-5.0.1 ------------------------------------------------------------------------ r10709 | karypis | 2011-08-31 16:07:57 -0500 (Wed, 31 Aug 2011) - Fixed critical bug in the mesh partitioning routines. metis-5.0 ------------------------------------------------------------------------ r10667 | karypis | 2011-08-04 00:35:30 -0500 (Thu, 04 Aug 2011) - Updated/corrected error messages. - Addressed some build issues. metis-5.0rc3 ------------------------------------------------------------------------ r10560 | karypis | 2011-07-13 08:19:10 -0500 (Wed, 13 Jul 2011) - Fixed various bugs that were identified by testers. - Some minor performance and quality improvements. - Addressed some build issues. metis-5.0rc2 ------------------------------------------------------------------------ r10496 | karypis | 2011-07-06 11:04:45 -0500 (Wed, 06 Jul 2011) - Various run-time and quality optimizations. - Option error-checking. - Signal-based heap cleanup on error. Metis API routines will not return nicely and cleanup all memory that may have allocated. - Reduced memory requirements. - Fixed various bugs identified in rc1. - Added back Fortran support in the form of alternate API names (see libmetis/frename.h). - Minor code changes to accommodate ParMetis 4.0. metis-5.0rc1 ------------------------------------------------------------------------ r10227 | karypis | 2011-06-13 23:35:05 -0500 (Mon, 13 Jun 2011) - A nearly complete re-write of Metis' code-based that changed expanded the functionality of the command-line programs and API routines. - Multi-constraint partitioning can be used in conjunction with minimization of the total communication volume. - All graph and mesh partitioning routines take as input the target sizes of the partitions, which among others, allow them to compute partitioning solutions that are well-suited for parallel architectures with heterogeneous computing capabilities. - When multi-constraint partitioning is used, the target sizes of the partitions are specified on a per partition-constraint pair. - The multilevel k-way partitioning algorithms can compute a partitioning solution in which each partition is contiguous. - All partitioning and ordering routines can compute multiple different solutions and select the best as the final solution. - The mesh partitioning and mesh-to-graph conversion routines can operate on mixed element meshes. - The command-line programs provide full access to the entire set of capabilities provided by Metis' API. - Re-written the memory management subsystem to reduce overall memory requirements. metis-5.0pre2 ------------------------------------------------------------------------ r1437 | karypis | 2007-04-07 23:16:16 -0500 (Sat, 07 Apr 2007) - Added installation instructions and change-logs. - Tested 32bit & 64bit on 64bit architectures and passed tests. - Tested 32bit on 32bit architectures and passed tests. - strtoidx() addition for portable input file parsing - Restructured the internal memory allocation schemes for graph and refinement data. This should enhance portability and make the code easier to maintain. - Fixed some bad memory allocation calls (i.e., sizeof(x)/sizeof(idxtype). However, there are tons of those and need to be corrected once and for all by eliminating workspace and the associated mallocs. - Added mprint/mscanf family of functions for portable formated I/O of the idxtype datatype. The specifier for this datatype is %D. All library routines use this function for printing. The implementation of these routines is not very efficient, but that should do for now (in principle these routines should not be used unless debugging). - Incorporated GKlib into METIS, which replaced many of its internal functions. GKlib's malloc interface will enable graceful and clean aborts (i.e., free all internally allocated memory) on fatal errors. This will probably be available in the next pre-release. - Fixed the problems associated with metis.h that were identified by David (flyspray Issue #9). METIS 4.0.2, 3/10/04 ------------------------------------------------------------------------------ - Fixed a problem with weighted graphs and ometis.c METIS 4.0.1, 11/29/98 ------------------------------------------------------------------------------ This is mostly a bug-fix release - Fixed some bugs in the multi-constraint partitioning routines - Fixed some bugs in the volume-minimization routines METIS 4.0.0, 9/20/98 ------------------------------------------------------------------------------ METIS 4.0 contains a number of changes over the previous major release (ver 3.0.x). Most of these changes are concentrated on the graph and mesh partitioning routines and they do not affect the sparse matrix re-ordering routines. Here is a list of the major changes: Multi-Constraint Partitioning ----------------------------- METIS now includes partitioning routines that can be used to a partition a graph in the presence of multiple balancing constraints. Minimizing the Total Communication Volume ----------------------------------------- METIS now includes partitioning routines whose objective is to minimize the total communication volume (as opposed to minimizing the edge-cut). Minimizing the Maximum Connectivity of the Subdomains ----------------------------------------------------- The k-way partitioning routines in METIS can now directly minimize the number of adjacent subdomains. For most graphs corresponding to finite element meshes, METIS is able to significantly reduce the maximum (and total) number of adjacent subdomains. METIS 3.0.6, 1/28/98 ------------------------------------------------------------------------------- - Fixed some problems when too many partitions were asked, and each partition end up having 0 vertices - Fixed some bugs in the I/O routines - Added support for the g77 compiler under Linux METIS 3.0.5, 12/22/97 ------------------------------------------------------------------------------- - Fixed problems on 64-bit architectures (eg., -64 option on SGIs). - Added some options in Makefile.in METIS 3.0.4, 12/1/97 ------------------------------------------------------------------------------- Fixed a memory leak in the ordering code. METIS 3.0.3, 11/5/97 ------------------------------------------------------------------------------- This is mostly a bug-fix release with just a few additions Added functionality - Added support for quadrilateral elements. - Added a routine METIS_EstimateMemory that estimates the amount of memory that will be allocated by METIS. This is useful in determining if a problem can run on your system. - Added hooks to allow PARMETIS to use the orderings produced by METIS. This is hidden from the user but it will be used in the next release of PARMETIS. Bug-fixes - Fixed a bug related to memory allocation. This should somewhat reduce the overall memory used by METIS. - Fixed some bugs in the 'graphchk' program in the case of weighted graphs. - Removed some code corresponding to unused options. - Fixed some minor bugs in the node-refinement code ------------------------------------------------------------------------------- METIS 3.0 contains a number of changes over METIS 2.0. The major changes are the following: General Changes --------------- 1. Added code to directly partition finite element meshes. 2. Added code to convert finite element meshes into graphs so they can be used by METIS. 1. The names, calling sequences, and options of the routines in METISlib have been changed. 2. Better support has been added for Fortran programs. 3. Eliminated the 'metis' program. The only way to tune METIS's behavior is to use METISlib. 4. Improved memory management. METIS should now only abort if truly there is no more memory left in the system. Graph Partitioning ------------------ 1. Added partitioning routines that can be used to compute a partition with prescribed partition weights. For example, they can be used to compute a 3-way partition such that partition 1 has 50% of the weight, partition 2 has 20% of the way, and partition 3 has 30% of the weight. 2. Improved the speed of the k-way partitioning algorithm (kmetis). The new code has better cache locality which dramatically improves the speed for large graphs. A factor of 4 speedup can be obtained for certain graphs. METIS can now partition a 4 million node graph in well under a minute on a MIPS R10000. 3. Eliminated some of the options that were seldom used. Fill-Reducing Orderings ---------------------- 1. Added a node based ordering code `onmetis' that greatly improves ordering quality. 2. Improved the quality of the orderings produced by the original edge-based ordering code (it is now called 'oemetis'). 3. METIS can now analyze the graph and try to compress together nodes with identical sparsity pattern. For some problems, this significantly reduces ordering time 4. METIS can now prune dense columns prior to ordering. This can be helpful for LP matrices. Mesh Partitioning ----------------- 1. METIS can now directly partition the element node array of finite element meshes. It produces two partitioning vectors. One for the elements and one for the nodes. METIS supports the following elements: triangles, tetrahedra, hexahedra Mesh-To-Graph Conversion Routines --------------------------------- 1. METIS now includes a number of mesh conversion functions that can be used to create the dual and nodal graphs directly from the element connectivity arrays. These are highly optimized routines.