Using the plantTracker trackSpp() function

17 February 2022

Introduction

This vignette gives detailed information about the trackSpp() function, the main “workhorse” function in the plantTracker R package. trackSpp() transforms a data set of annual maps of plant occurrence into a demographic data set. To accomplish this, the function compares maps across sampling years and assigns unique identifiers (“trackIDs”) to plants that overlap from year to year. Plants with the same trackID are assumed to be the same individual. These trackIDs are then used to assign survival, growth, recruit status, and age to each individual plant in each year.

This process is complex and requires certain assumptions, so the following pages will explain and illustrate the logic of each of these steps. We recommend you read through this vignette before using trackSpp() in order to fully understand the assumptions inherent to the function, and to make sure that you are adjusting the user-specified arguments correctly.

1 Input data

The required inputs to the trackSpp() function are explained in detail in Suggested plantTracker Workflow, Parts 1.1, 1.2, and 2, as well as the “help” file for this function (which you can access by typing ?trackSpp in the R console). However, I’ll include a short description of the arguments here:

trackSpp() argument ============== dat

description

====================================== An sf data frame in which each row has spatial data for an individual observation in one year.

required?

========= Yes

default?

======== N/A

inv A named list in which the name of each element of the list is a quadrat name in dat, and the contents of that list element is a numeric vector of all of the years in which that quadrat was actually sampled (not just the years that have data in dat!) Yes N/A
dorm A single value greater than or equal to 0 indicating the number of years these species are allowed to go dormant. OR a data frame with a row for each species in dat, species names in the “Species” column and a dormancy value in the “dorm” column. Yes N/A
buff A single value greater than or equal equal to zero, indicating how far a far a polygon can move from year i to year i+1 and still be considered the same individual. OR a data frame with a row for each species present in dat, species names in the “Species” column, and a buff value in the “buff” column. Yes N/A
clonal A logical value (TRUE or FALSE) indicating whether a species is allowed to be clonal or not. OR a data frame with a row for each species in dat, species names in the “Species” column, and a clonal value in the “clonal” column. Yes N/A
buffGenet A single value greater than or equal to zero indicating how close polygons must be to one another in the same year to be grouped as a genet. OR a data frame with a row for each species in dat, species names in the “Species” column, and a buffGenet value in the “buffGenet” column. only if clonal = TRUE N/A
species/ site/ quad/ year/ geometry Five separate arguments, each a character string that indicates the name of the column in dat that contains data for each of these required data types. No value is required if the column name is the same as the default. If only one column names is different than the default, then you only need to supply a value for that argument. No “Species”| /“Site”| /“Quad”| /“Year”| /“geometry” | | | | |
aggByGenet A logical argument (TRUE or FALSE) that determines whether the output will be aggregated by genet. No TRUE
printMessages A logical argument (TRUE or FALSE) that determines if the function returns informative messages. No TRUE
flagSuspects A logical argument (TRUE or FALSE) that indicates whether “suspect” individuals will be flagged. No FALSE
shrink A numeric value. When two consecutive| No | 0.10 | observations have the same trackID, | | | and the ratio of size_t+1 to size_t | | | is smaller than the value of | | | shrink, the observation in year_t | | | gets a TRUE in the “Suspect” column.| | |
dormSize A numeric value. An individual is flagged as “suspect” if it “goes dormant” and has a size that is less than or equal to the percentile of the size distribution for this species that is designated by dormSize No 0.05

Throughout this vignette, we’ll use a smaller subset of the grasslandData and grasslandInventory data sets that are included in plantTracker for examples. The subset of grasslandData will be referred to as dat, because it is the dat argument in trackSpp(). The subset of grasslandInventory will be referred to as inv, since it is used for the inv argument.

Here are the first few rows of the dat data set we’ll be using:

#> Simple feature collection with 6 features and 6 fields
#> Geometry type: POLYGON
#> Dimension:     XY
#> Bounding box:  xmin: -0.000160084 ymin: 0.4334812 xmax: 0.286985 ymax: 0.9419673
#> CRS:           NA
#>                 Species Type Site Quad Year sp_code_6
#> 1 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#> 2 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#> 3 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#> 4 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#> 5 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#> 6 Heteropogon contortus poly   AZ  SG2 1922    HETCON
#>                         geometry
#> 1 POLYGON ((0.237747 0.908835...
#> 2 POLYGON ((0.2833037 0.85959...
#> 3 POLYGON ((0.008583123 0.449...
#> 4 POLYGON ((0.1480142 0.46983...
#> 5 POLYGON ((0.03573306 0.5259...
#> 6 POLYGON ((0.2441894 0.52689...

Here are the maps for one quadrat in dat over the first several years of sampling:

**Figure 1.1**: *Spatial map of a subset of example `dat` data set*

Figure 1.1: Spatial map of a subset of example dat data set

2 Iterate through sites, quadrats, and species

The first step of trackSpp() is iterating through dat first by site, then by quadrat, then by species. inv is also filtered down to a single vector of sequential sampling years for the quadrat in question. Then trackSpp() gets the appropriate dorm, clonal, buff, and buffGenet arguments for that given species, either by using the globally-specified value in the trackSpp() function call, or by extracting the species-level value if the argument was given as a data frame of unique values for each species. Then, the data and arguments are passed to the assign() function. This function is not exported in plantTracker, but the code can be accessed by typing plantTracker:::assign() in the console. The remainder of this vignette describes the process of the assign() function.

3 Track individuals over time using the assign() function

Once the input data has been filtered down to one site, one quadrat, and one species, then the assign() function is used to track individuals through time. In this vignette, we will use data from a site “AZs”, quadrat “SG2”, and the species “Heteropogon contortus”. The inv vector for this quadrat is c(1922, 1923, 1924, 1925, 1926, 1927, 1928, 1929, 1930, 1931, 1932, 1933, 1934)

3.1 Get data for the first year of sampling

The data is subset yet again, this time for only the first year of observations for this species in this quadrat, and stored in a data frame called tempPreviousYear. In our example, data from 1922 will be stored in this data.frame.

3.2 Group genets together using groupByGenet, and assign “trackIDs” to each individual in the first year of sampling

Because this is the first year of sampling, no polygons have been grouped into genets (if clonal = TRUE), and none have been assigned trackIDs. Both of these tasks are accomplished by a function called ifClonal(), which is internal to assign(). If clonal = FALSE, then clonality is not allowed, and each polygon is assumed to represent a unique genet. In this case, each polygon/row in tempPreviousYear is assigned a unique “genetID” that acts as a temporary identifier that will be used later in the function.

If clonal = TRUE, then clonality is allowed, and it is possible for multiple polygons/rows in the raw data to represent one genetic individual. In this case, we use a function called groupByGenet() to group polygons together into one genet. This function uses the buffGenet argument that is supplied to trackSpp(). The distance (buffGenet x 2) is the maximum distance that two polygon edges can be from one another and still be considered ramets from the same genet. In other words, Any two polygons with edges that are less than (buffGenet x 2) from one another will get the same “genetID.” groupByGenet() creates a matrix of distances between every single polygon present in the input data.frame, and clusters them together based on proximities that are below the threshold indicated by buffGenet. Then, basal area is summed for all ramets and stored in the “basalArea_genet” column of tempPreviousYear. Also, once temporary genetIDs have been assigned, a permanent “trackID” is given to each genet. This is a combination of the six letter species code, year of first observation, and an arbitrary index differentiating individuals of the the same species and year of recruitment (e.g. HETCON_1922_3).

The following figure shows data for one year (1922) and one species (Heteropogon contortus).

**Figure 3.1**: *The value of 'buffGenet' used in the `trackSpp()` function can make a big difference in genetID assignments. These examples move from no genet grouping on the left, where every polygon has its own genetID, to grouping any ramets together that are less than 10 cm apart on the right. Colors and numbers indicate different genetIDs. Buffers are drawn around ramets that belong to the same genet.*

Figure 3.1: The value of ‘buffGenet’ used in the trackSpp() function can make a big difference in genetID assignments. These examples move from no genet grouping on the left, where every polygon has its own genetID, to grouping any ramets together that are less than 10 cm apart on the right. Colors and numbers indicate different genetIDs. Buffers are drawn around ramets that belong to the same genet.

3.3 Assign age and recruitment data to first year

We can also give all individuals in the first year data in the “age” and “recruit” columns. If the first year for which there is data in dat is actually the very first year the quadrat was sampled (e.g. there are Heteropogon contortus observations in 1922, and the quadrat SG2 was first sampled in 1922), then we put an “NA” in both the “age” and “recruitment” columns. Because there was no data collected in the previous year, we don’t know if any of these plants are new recruits, and don’t know their age.

If the first year of data in dat – now in tempPreviousYear– is after the first year the quadrat was sampled (e.g. the first Heteropogon contortus observations are in 1924, but the quadrat SG2 was first sampled in 1922), then we know that these individuals in tempPreviousYear really are new recruits and are in their first year, because they were not present in the previous year. They get a “1” in both the “recruit” and “age” columns.

If the first year of data in dat is also the last year that the quadrat is sampled (e.g. the first Heteropogon contortus observations are in 1934, which is the last year of sampling), then the observations in tempPreviousYear get a “1” in both the “recruit” and “age” columns, but also get an “NA” in the “size_tplus1” and “survives_tplus1” columns. If this is the case, the assign() function still uses ifClonal() to assign genetIDs to these observations and then assigns trackIDs. But there are no further steps needed to generate demographic data, so the function returns tempPreviousYear as the result after this point.

3.4 Compare sequential years of data to track individuals through time

Now comes the main work of the function, which compares quadrat maps for a species over time, and assigns the same trackID to polygons that overlap from year to year. This is accomplished using a for loop that compares the previous year of data to the current year of data. The loop iterates through year by the index i. The “previous” year is the year with the index i-1 in the inv vector, and the associated data is stored in the tempPreviousYear data.frame. The “current” year is the year with the index i in the inv vector, and the associated data is stored in tempCurrentYear data.frame. There are multiple if-else statements nested within this larger for loop, which I’ll explain using a dichotomous key below.

3.4.1 Is there a gap between year i-1 and year i?

Not every quadrat was sampled every year, and this is indicated in the inv vector. This is one case where the dorm argument input into trackSpp() and then passed to assign() comes in. The value of dorm indicates how many years it is “acceptable” for a plant to disappear from the quadrat maps and still be considered the same individual with the same trackID. The value of dorm must be determined by the user, and represents a point where it’s necessary to have some biological knowledge about the species present in the data set. For example, allowing dormancy makes sense for some species such as perennial forbs, but doesn’t for large organisms such as trees. trackSpp() allows you to specify the dorm argument globally with one value, or individually for each species. The dorm argument can also be a way to control how “forgiving” you want to be with the data set. For example, if you expect that plants were sometimes missed during the mapping or digitization process, then allowing a dormancy value of “1” will help account for this. It’s important to realize that using a dorm value of “1” or higher will likely slightly overestimate growth and survival, while using a value of “0” will likely slightly underestimate growth and survival.

If a gap between inv[i] and inv[i-1] is…

… greater than the dorm value + 1 (e.g. if dorm = 1, inv[i] = 1923, and inv[i-1] = 1920; 1923 - 1920 > (1+1)), then we don’t know if the observations in tempPreviousYear survived or grew. They get an “NA” in the “size_tplus1” and “survives_tplus1” columns ……….

     |

=========+ Go to | step | 3.4.11 | |

… less than or equal to the dorm value + 1 (e.g. if dorm = 1, inv[i] = 1923, and inv[i-1] = 1921; 1923 - 1921 = (1+1)), then we can compare the data from year inv[i-1] (tempPreviousYear) to data from year inv[i] (tempCurrentYear) ……………………………….
     |

Proceed | to step | 3.4.2| |

3.4.2 Get data for year i

We already have data for the “previous” year (inv[i-1]) stored in tempPreviousYear. Now that we know that the gap between years doesn’t exceed dorm, we can get data from the “current” year (inv[i]). We do this by subsetting dat for all observations in year inv[i]. Then, we use ifClonal() to group closely-grouped polygons into genets if applicable, and assign genetIDs. This data set is stored in the tempCurrentYear data.frame. Proceed to step 3.4.3.

3.4.3 Are there any observations in the “previous” year (inv[i-1])?

Even if a quadrat was sampled in inv[i-1], it is possible that there weren’t actually any plants there that year.

If there …

… is data in tempPreviousYear………….

      |

==========+ Proceed | to step | 3.4.4|

… is not data in tempPreviousYear…… Go to | step | 3.4.12

3.4.4 Add a buffer around the “previous” year data

Now a buffer is added around each polygon in tempPreviousYear. This data is stored in the tempPreviousBuff data.frame. This buffer is of the width specified in the buff argument of trackSpp() that is passed to assign(). Adding this buffer before comparing maps from the previous and current years allows for mapping error and slight movement of plants between years, which is especially likely for forbs that resprout every year. Proceed to step 3.4.5.

**Figure 3.2**: *With a 10 cm buffer, these polygons in 1922 and 1923 overlap and will be identified by trackSpp() as the **same** individual and receive the same trackID*.

Figure 3.2: With a 10 cm buffer, these polygons in 1922 and 1923 overlap and will be identified by trackSpp() as the same individual and receive the same trackID.

**Figure 3.3**: *With a 5 cm buffer, these polygons in 1922 and 1923 overlap and will be identified by trackSpp() as **different** individuals and receive different trackIDs.*

Figure 3.3: With a 5 cm buffer, these polygons in 1922 and 1923 overlap and will be identified by trackSpp() as different individuals and receive different trackIDs.

3.4.5 Are there actually any observations in the “current” year (inv[i])?

Even if a quadrat was sampled in inv[i], it is possible that there weren’t actually any plants there that year.

If there …
… is data in tempCurrentYear…………. Proceed to step 3.4.7.
… is not data in tempCurrentYear……. Take the entire tempPreviousYear data frame to step 3.4.6

3.4.6 Store observations as “ghosts” to compare to data from the next year (inv[i+1]) during the next iteration of the loop.

This step also involves the “dormancy” concept discussed in section [3.4.1]. If dormancy is not allowed for this species (i.e. dorm = 0), then the observations in question that were “sent” to this step must be given a “0” in the “survives_tplus1” column and an “NA” in the “size_tplus1” column. Because they are not allowed to be dormant, if they don’t have overlapping individuals in the current year (inv[i])–which they don’t if they’re sent to this step–then they’re dead. Take these observations to step 3.4.11.

However, if dormancy is allowed for this species, the individuals that were “sent” to this step because they didn’t overlap with anything in year inv[i] can be “stored” and compared to the next set of data from year i+1. We call these stored individuals “ghosts.” These ghosts will be compared to the polygons from year i+1, i+2, etc. all the way until the dormancy argument is exceeded. For example, if some Heteropogon contortus individuals were present in 1922, but did not overlap with any plants in 1923 and dorm = 1, then they are stored as “ghosts” and their locations together with those of individuals from 1923 are compared to the mapped individuals from 1924. If these “ghosts” have no matches in the 1924 data, then they get a “0” in the “survives_tplus1” column since they are only allowed to be dormant for one year. We then call these individuals “dead ghosts.” Any observations that are sent to this step, but that were observed in a year that is greater than 1 + dorm years ago, become “dead ghosts.” The “dead ghosts” are added to the output data.frame. The “ghosts” are saved for the next step, which is 3.4.12

**Figure 3.4**: *A visualization of the 'dormancy' scenario described above. The observation in 1922 has no overlap with any observation in 1923 (panels 1 and 2). However, if 'dorm' is greater than or equal to 1, we can save the 1922 observation as a 'ghost' (illustrated with a dotted border in panel 2). When compared to observations in 1924, there is an overlap! If 'dorm' = 1 (or more), then the observation in 1922 will get a '1' in the 'survives_tplus1' column. If 'dorm' = 0, then the observation in 1922 will get a '0' for survival, and the observation in 1924 will be a new recruit.*

Figure 3.4: A visualization of the ‘dormancy’ scenario described above. The observation in 1922 has no overlap with any observation in 1923 (panels 1 and 2). However, if ‘dorm’ is greater than or equal to 1, we can save the 1922 observation as a ‘ghost’ (illustrated with a dotted border in panel 2). When compared to observations in 1924, there is an overlap! If ‘dorm’ = 1 (or more), then the observation in 1922 will get a ‘1’ in the ‘survives_tplus1’ column. If ‘dorm’ = 0, then the observation in 1922 will get a ‘0’ for survival, and the observation in 1924 will be a new recruit.

3.4.7 Are there any overlaps between polygons in tempPreviousYear and tempCurrentYear?

Use the st_intersection function from the sf package to determine if there is any overlap between polygons in the the previous year (inv[i-1], stored intempPreviousYear) and the current year (inv[i], stored in tempCurrentYear).

If there …

… is overlap between tempPreviousYear and tempCurrentYear………………

====================== Proceed to step 3.4.8
… is not overlap between tempPreviousYear and tempCurrentYear Take the | tempPreviousYear | data frame to step | 3.4.6.Take the tempCurrentYear | data frame to step | 3.4.12, but| first assign them a | “1” in the “recruit” | column and a “1” in | the “age” column. |

3.4.8 Compare the overlap between tempPreviousYear and tempCurrentYear to assign trackIDs.

The st_intersection function used in step 3.4.7 returns a matrix that gives the total area of overlap between each genet in tempPreviousYear and each genet in tempCurrentYear (the “overlap matrix”). There are two options from here, depending if clonal = TRUE or FALSE.

If clonal = TRUE, each “parent” (those in tempPreviousYear) can be represented by more than one polygon. However, all polygons that are part of the same genet have the same trackID. “Child” polygons (those in tempCurrentYear) have not yet been grouped by genet, and do not have trackIDs assigned. The “overlap matrix” is aggregated by parent trackID so that each parent trackID has only one row in the matrix. The “overlap matrix” has a column for each potential child polygon. Each “child” polygon (those in tempCurrentYear) can have only one parent trackID (but can have multiple parent polygons). Each “parent” (those in tempPreviousYear) can have multiple child polygons. In other words, each row (parent) of the “overlap matrix” is allowed to have overlap values in more than one column, but each column (child) of the matrix can only have one overlap value.

If each column of the overlap matrix has only one overlap value, then the next step is straightforward. Each overlapping “child” polygon is given the trackID of it’s “parent” in the tempCurrentYear data frame. If there are multiple “children” that overlap with the same parent, those children are considered to be ramets of the same genet. If, however, a “child” overlaps with multiple parents (i.e. a column has values in more than one row), then we need to determine which potential “parent” is more likely the true parent. This “tie” is first broken by comparing the overlap area. The true “parent” is the parent with the highest degree of overlap with the “child”. In the rare case of a tie in
overlap area, the parent polygon with a centroid closest to the centroid of the child polygon is identified as the true “parent”. All other values in that child column are turned to “NA”s.

If clonal = FALSE, then each “child” can have only one “parent”, and each “parent” only one “child”. In this case, the assign() function uses a while loop to look through the matrix generated by step 3.4.7. The highest value in the matrix indicates the greatest degree of overlap between a given “parent” and “child.” The trackID from that parent is given to that child. Then, the overlap values in the entire “parent” row and “child” columns in the overlap matrix are changed to zero, since each parent can have only one child and each child can have only one parent. The while loop repeats this process of finding the highest value in the matrix to assign trackIDs until the entire matrix has no non-zero values left.

Take both the tempCurrentYear (child) and tempPreviousYear (parent) data frames to step 3.4.9.

**Figure 3.5**: *Here are the data for *Heteropogon contortus* in 1922 and 1923. A 5 cm buffer is shown around each genet in 1922. Data from both years have been grouped by genet using 'buffGenet' = .01*

Figure 3.5: Here are the data for Heteropogon contortus* in 1922 and 1923. A 5 cm buffer is shown around each genet in 1922. Data from both years have been grouped by genet using ‘buffGenet’ = .01*

**Figure 3.6**: *Here are the buffered data for Heteropogon contortus from 1922, overlapped with the data from 1923.*

Figure 3.6: Here are the buffered data for Heteropogon contortus from 1922, overlapped with the data from 1923.

**Figure 3.7**: *Here are the trackID assignments for these two years of data. Each trackID has a different color and a different number.*

Figure 3.7: Here are the trackID assignments for these two years of data. Each trackID has a different color and a different number.

3.4.9 Flag any suspect observations

If flagSuspects = FALSE, proceed directly to step 3.4.10. If flagSuspects = TRUE, the following checks take place. The first check identifies and flags any individuals in the previous year that became substantially smaller in the current year. For example, there are two overlapping observations in consecutive years that the function has given the same trackID. The observation in the previous year has a basal area of 20 cm2^2, and the observation in the current year has a basal area of 1.5 cm2^2. It is possible that these two are in fact the same individual, but it is also possible that the observation in the current year is a new recruit that happens to be in a similar location to the larger plant in the previous year. If flagSuspects = TRUE, any individual from the previous year (any “parent”) that has a basal area in the current year below a certain percentage of its size will be get a “TRUE” in the “Suspect” column. This threshold is defined by the shrink argument, which has a default value of 0.10 (10%). To use our previous example, if shrink = .10, the individual with a basal area of 20 cm2^2 in the previous year will be flagged as “suspect” because it has shrunk to below 10% of its size.

The second check flags very small individuals that go dormant. This check is only used if the dorm argument is set to “1” or higher, and if the observations were measured as polygons. This check can’t be used for observations that were measured as points and converted to small polygons of a fixed size, since we don’t know the plant’s true size. A plant with a very small basal area is unlikely to actually survive dormancy. It is possible that the tracking function has correctly given the same trackID to a very small individual that is present in year 1, absent in year 2, and present again in year 3. However, it is also very possible that this very small individual died, and the observation in year 3 is a new recruit. This check puts a TRUE in the “suspect” column of any “parent” individual that “survives” dormancy if it is below a certain percentile of the size distribution for that species (which is created using the size data for that species provided in dat). The percentile threshold is defined by the dormSize argument, which has a default value of 0.05 (5%).

Once these checks are complete, the tempCurrentYear (child) and tempPreviousYear (parent) data frames go to step 3.4.10.

It is important to note that, even though these checks flag individuals whose trackID assignment might be “suspect”, the trackSpp() function still proceeds as it would if flagSuspects was set to FALSE. It is up to the user whether they want to exclude “suspect” observations from subsequent analyses. If you do not exclude these observations, it is possible that you would slightly overestimate survival, and underestimate recruitment and growth.

3.4.10 Separate the “ghosts” and the new recruits from the “parent” and “child” data frames

At this point, the tempPreviousYear data frame gets broken into a parents data.frame, which contains data for all those genets that have a “child” in the current year, and a ghosts data.frame, which contains data for those genets that do not have a “child.” The tempCurrentYear data frame is broken into a children data.frame, containing the data for all those genets that have a “parent” in the previous year, and an orphans data.frame, which contains the data for genets that do not have a parent.
**Figure 3.8**: *Here is a visualization of how the observations are broken into 'parents', 'ghosts', 'children', and 'orphans'.*

Figure 3.8: Here is a visualization of how the observations are broken into ‘parents’, ‘ghosts’, ‘children’, and ‘orphans’.

The ghosts data frame is sent to step 3.4.6. All of the observations in the parents data frame get a “1” in the “survives_tplus1” column, and the total genet area of their “child” is put into the “size_tplus1” column. Then, the parents data frame is sent to step 3.4.11 All of the observations in the children data frame get a “0” in the “recruit” column, the age column is populated with 1 + the age of their parent. The observations in the orphans data frame get a “1” in the “recruit” column and a “1” in the “age” column. However if the orphans occur after a gap in sampling, they instead get an “NA” in the “recruit” and “age” columns, since we don’t know whether they were recruited in year i or during the gap. Then, both the children and orphans data.frames are sent to step 3.4.12.

3.4.11 Store the resulting demographic data

Now demographic data (or NAs, if appropriate) and trackIDs have been assigned to every individual in tempPreviousYear (if there are actually observations in inv[i-1]), we can save these results. They are added to a data frame that, when the for loop finishes, will be returned by the assign() function. If there are any “dead ghosts”, they are also added to the output data.frame. If inv[i] is not the last year of sampling, then proceed to step 3.4.12. If inv[i] is the last year of sampling, then the for loop is over!

3.4.12 Get ready for the next iteration of the loop

If there are still iterations of the loop left, that is if inv[i] is not the last year of inv, then the data from year[i] (stored either in tempCurrentYear or children and orphans) and any ‘ghosts’ from previous years are put into the tempPreviousYear data.frame. This happens even if tempCurrentYear is empty. If there are not already genetIDs assigned to the data from inv[i] in tempCurrentYear (which happens if this is the first year after a gap in sampling), then it is passed through ifClonal(). The loop proceeds to the next value of i (start again at section 3.4.1).

Once the loop has progressed through the ‘last’ year, then the output data set will be saved, and the next species in the data set will be sent to assign()!

4 Prepare the trackSpp() results to be returned!

There are just a few more steps in trackSpp() after the assign() function has been applied to every species present in the data set.

4.1 Aggregate the results by genet

The data.frames returned by the assign() function are the exact same length as the input data frames. This means that, even though trackIDs and demographic data are assigned on the genet level, each ‘observation’, or ramet, has its own row of data. If the trackSpp() argument aggByGenet = TRUE, the output data set is passed through the aggregateByGenet() function from plantTracker. This aggregates the data set so that each genet in each year is represented by only one row of data. The polygons for each ramet are combined into one spatial object using the st_union function from the sf package. The resulting data frame will be shorter and narrower than the input data.frame, since rows are combined. While the output of the assign() function contains a column for “basalArea_ramet”, this column is no longer present once the results are aggregated.

If there were any columns in the input data frame beyond those required (Species, Site, Quad, Year, geometry), these will be dropped also, since the function can’t predict whether it will be possible to aggregate those on the genet level. If your input data frame has data in additional columns that can be aggregated and that you want to keep with the demographic data, I recommend using aggByGenet = FALSE. If you want to ultimately aggregate the demographic data by genet, you can use the sf::aggregate function on your own, or modify the code for the aggregateByGenet() function to include your additional columns. If you have set clonal = FALSE for all species in your input data.frame, I also recommend using aggByGenet = FALSE, since your results will already be on the genet scale!

4.2 Informative messages

If the argument printMessages = TRUE, one or two messages will be printed as each species goes through the assign() function. These messages are not warnings or errors! Unless the function returns a message preceded by the word “warning” or “error”, the function is working! The messages I’m talking about here provide information about why there are “NA”s present in the demographic results, which may be concerning if you aren’t expecting them. The first message tells you which year is the last year of sampling for this quadrat. Observations in the last year of sampling will have an “NA” in both the “survives_tplus1” and “size_tplus” columns because we have no data to determine whether they survived. The second message only appears if there is a gap in sampling for that quadrat that exceeds the dorm argument. The message indicates that observations in the year(s) preceding that gap will have “NA”s in the “survives_tplus1” “size_tplus1” columns, since we don’t know when they died. If both printMessages = TRUE and aggByGenet = TRUE, an additional message will be printed. This message will warn that the output data frame is shorter and narrower than the input data.frame, and will explain why that is.

Lastly, if printMessages = TRUE, the trackSpp() function will print progress messages that indicate which site is being run the function, then which species, then which quadrat. This is helpful both to know how far the function has gotten in your data, and also is helpful if the function errors out. You can find roughly where the problem in the data is, since you know the species, quadrat, and site where the function crashed.

If printMessages = FALSE, then no messages will be returned.

5 Examples

Here are the trackID assignments for 4 years of observations of Heteropogon contortus from a subset of the SG2 quadrat near Tucson, Arizona. The trackSpp function here uses dorm = 1, clonal = TRUE, buff = 0.05 and buffGenet = 0.01.
**Figure 5.1**: *Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.*

Figure 5.1: Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.

Here is that same data subset, but run through trackSpp() using a buffGenet value of .05
**Figure 5.2**: *Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.*

Figure 5.2: Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.

Here it is again, but run through trackSpp() using clonal = FALSE
**Figure 5.3**: *Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.*

Figure 5.3: Here are the trackID assignments over 4 years of data. Each trackID is shown as a different color and has a different number.