Package overview: multigraphr

CRAN status CRAN Downloads

Installation

You can install the released version of multigraphr from CRAN with:

install.packages("multigraphr")

The development version from GitHub with:

# install.packages("devtools")
devtools::install_github("termehs/multigraphr")

Multigraphs and applicability

Multigraphs are network representations in which multiple edges and edge loops (self edges) are permitted. These data structures can be either directly observed or aggregated by classifying or cross-classifying node attributes into meta nodes. For the latter case, within group edges correspond to self-edges. See example below where the original graph with 15 nodes and 12 edges (left) is aggregated based on node categories into a small multigraph with 4 nodes (right).

Edge aggregation can also be used to obtain multigraphs. Assume that we study a graph with three different types of relations over three periods of time:

If we aggregate over time periods, we obtain for each edge category a multigraph for the total time period of three days:

For more details on these kinds of aggregations, see Shafie (2015;2016).

Multigraph representation of network data

Multigraphs are represented by their edge multiplicity sequence M with elements M(i,j), denoting the number of edges at vertex pair sites (i,j) ordered according to (1,1) < (1,2) <···< (1,n) < (2,2) < (2,3) <···< (n,n), where n is number of nodes. The number of vertex pair sites is given by r = n(n+1)/2.

Random multigraph models

Two probability models for generating undirected random multigraphs are implemented in the package together with several statistics under these two models. Moreover, functions for goodness of fit tests are available for the presented models.

Note that some of the functions are only practical for small scale multigraphs.

The first model is obtained by random stub matching (RSM) given observed degree sequence of a multigraphs, so that edge assignments to vertex pair sites are dependent. The second is obtained by independent edge assignments (IEA) according to a common probability distribution. There are two ways in which an approximate IEA model can be obtained from an RSM model, thus facilitating the structural analysis. These two ways are - independent stub assignment (ISA)

Example

library('multigraphr')

Consider a small graph on 3 nodes and the following adjacency matrix:

A <-  matrix(c(1, 1, 0, 
               1, 2, 2, 
               0, 2, 0), 
             nrow = 3, ncol = 3)
A
#>      [,1] [,2] [,3]
#> [1,]    1    1    0
#> [2,]    1    2    2
#> [3,]    0    2    0

The degree sequence of the multigraph has double counted diagonals (edge stubs for loops) and is given by

D <- get_degree_seq(adj = A, type = 'graph')
D
#> [1] 3 7 2

so that number of edges in the multigraph is half the sum of the degree sequence which is equal to 6.

The RSM model given observed degree sequence shows the sample space consists of 7 possible multigraphs, as represented by their multiplicity sequence m.seq (each row correspond to the edge multiplicity sequence of a unique multigraph):

rsm_1 <- rsm_model(deg.seq = D)
rsm_1$m.seq
#>   M11 M12 M22 M13 M23 M33
#> 1   1   1   0   3   0   1
#> 2   1   1   0   2   2   0
#> 3   1   0   1   3   1   0
#> 4   0   3   0   2   0   1
#> 5   0   3   0   1   2   0
#> 6   0   2   1   2   1   0
#> 7   0   1   2   3   0   0

with probabilities associated with each multigraph, together with statistics ‘number of loops’, ‘number of multiple edges’ and ‘simple graphs or not’:

rsm_1$prob.dists
#>     prob.rsm loops multiedges simple
#> 1 0.03030303     5          1      0
#> 2 0.18181818     3          3      0
#> 3 0.06060606     4          2      0
#> 4 0.06060606     3          3      0
#> 5 0.24242424     1          5      0
#> 6 0.36363636     2          4      0
#> 7 0.06060606     3          3      0

Consider using the IEA model to approximate the RSM model so that edge assignment probabilities are functions of observed degree sequence. Note that the sample space for multigraphs is much bigger than for the RSM model so the multiplicity sequences are not printed (they can be found using the function get_edgemultip_seq for very small multigraphs and their probabilities can be found using the multinomial distribution). The following shows the number of multigraphs under either of the IEA models:

ieas_1 <-   iea_model(adj = A , type = 'graph',  model = 'IEAS', K = 0, apx = TRUE)
ieas_1$nr.multigraphs
#> [1] 462

Statistics to analyze structural properties

These statistics include number of loops (indicator of e.g. homophily) and number of multiple edges (indicator of e.g. multiplexity/interlocking), which are implemented in the package together with their probability distributions, moments and interval estimates under the different multigraph models.

Example (cont’d)

Under the RSM model, the first two moments and interval estimates of the statistics M1 = ‘number of loops’ and M2 = ‘number of multiple edges’ are given by

rsm_1$M
#>              M1    M2
#> Expected  2.273 3.727
#> Variance  0.986 0.986
#> Upper 95% 4.259 5.713
#> Lower 95% 0.287 1.741

which are calculated using the numerically found probability distributions under RSM (no analytical solutions exist for these moments).

Under the IEA models (IEAS or ISA), moments of these statistics, together with the complexity statistic \(R_k\) representing the sequence of frequencies of edge sites with multiplicities 0,1,…,k, are found using derived formulas. Thus, there is no limit on multigraph size to use these. When the IEAS model is used to approximate the RSM model as shown above:

ieas_1$M
#>               M1    M2
#> Observed   3.000 3.000
#> Expected   2.273 3.727
#> Variance   1.412 1.412
#> Upper 95%  4.649 6.104
#> Lower 95% -0.104 1.351
ieas_1$R
#>              R0     R1     R2
#> Observed  2.000  2.000  2.000
#> Expected  2.674  1.588  1.030
#> Variance  0.575  1.129  0.760
#> Upper 95% 4.191  3.713  2.773
#> Lower 95% 1.156 -0.537 -0.713

When the ISA model is used to approximate the RSM model (see above):

isa_1 <-   iea_model(adj = A , type = 'graph',  
                     model = 'ISA', K = 0, apx = TRUE)
isa_1$M
#>              M1    M2
#> Observed  3.000 3.000
#> Expected  2.583 3.417
#> Variance  1.471 1.471
#> Upper 95% 5.009 5.842
#> Lower 95% 0.158 0.991
isa_1$R
#>              R0     R1     R2
#> Observed  2.000  2.000  2.000
#> Expected  2.599  1.703  1.018
#> Variance  0.622  1.223  0.748
#> Upper 95% 4.176  3.915  2.748
#> Lower 95% 1.021 -0.509 -0.711

The IEA models can also be used independent of the RSM model. For example, the IEAS model can be used where edge assignment probabilities are estimated using the observed edge multiplicities (maximum likelihood estimates):

ieas_2 <-   iea_model(adj = A , type = 'graph',  
                      model = 'IEAS', K = 0, apx = FALSE)
ieas_2$M
#>              M1    M2
#> Observed  3.000 3.000
#> Expected  3.000 3.000
#> Variance  1.500 1.500
#> Upper 95% 5.449 5.449
#> Lower 95% 0.551 0.551
ieas_2$R
#>              R0     R1     R2
#> Observed  2.000  2.000  2.000
#> Expected  2.845  1.331  1.060
#> Variance  0.434  0.805  0.800
#> Upper 95% 4.163  3.125  2.849
#> Lower 95% 1.528 -0.464 -0.729

The ISA model can also be used independent of the RSM model. Then, a sequence containing the stub assignment probabilities (for example based on prior belief) should be given as argument:

isa_2 <-   iea_model(adj = A , type = 'graph',  
                     model = 'ISA', K = 0, apx = FALSE, p.seq = c(1/3, 1/3, 1/3))
isa_2$M
#>               M1    M2
#> Observed   3.000 3.000
#> Expected   2.000 4.000
#> Variance   1.333 1.333
#> Upper 95%  4.309 6.309
#> Lower 95% -0.309 1.691
isa_2$R
#>              R0     R1     R2
#> Observed  2.000  2.000  2.000
#> Expected  2.144  2.248  1.160
#> Variance  0.632  1.487  0.710
#> Upper 95% 3.734  4.687  2.845
#> Lower 95% 0.554 -0.190 -0.525

The interval estimates can then be visualized to detect discrepancies between observed and expected values thus indicating social mechanisms at play in the generation of edges, and to detect interval overlap and potential interdependence between different types of edges (see Shafie 2015,2016; Shafie & Schoch 2021).

Goodness of fit tests

Goodness of fits tests of multigraph models using Pearson (S) and information divergence (A) test statistics under the random stub matching (RSM) and by independent edge assignments (IEA) model, where the latter is either independent edge assignments of stubs (IEAS) or independent stub assignment (ISA). The tests are performed using goodness-of-fit measures between the edge multiplicity sequence of a specified model or an observed multigraph, and the expected multiplicity sequence according to a simple or composite hypothesis.

Simulated goodness of fit tests

Probability distributions of test statistics, summary of tests, moments of tests statistics, adjusted test statistics, critical values, significance level according to asymptotic distribution, and power of tests can be examined using gof_sim given a specified model from which we simulate observed values from, and a null or non-null hypothesis from which we calculate expected values from. This in order to investigate the behavior of the null and non-null distributions of the test statistics and their fit to to asymptotic chi-square distributions.

Example

Simulated goodness of fit tests for multigraphs with n=4 nodes and m=10 edges.

(1) Testing a simple IEAS hypothesis with degree sequence (6,6,6,2) against a RSM model with degrees (8,8,2,2):

gof1 <- gof_sim(m = 10, model = 'IEAS', deg.mod = c(8,8,2,2), 
                hyp = 'IEAS', deg.hyp = c(6,6,6,2))

(2) Testing a correctly specified simple IEAS hypothesis with degree sequence (14,2,2,2):

gof2 <- gof_sim(m = 10, model = 'IEAS', deg.mod = c(14,2,2,2), 
                hyp = 'IEAS', deg.hyp = c(14,2,2,2))

The non-null (gof1) and null (gof2) distributions of the test statistics together with their asymptotic chi2-distribution can be visualised using ggplot2:

(3) Testing a composite IEAS hypothesis against a RSM model with degree sequence (14,2,2,2):

gof3 <- gof_sim(m = 10, model = 'RSM', deg.mod = c(14,2,2,2), 
                hyp = 'IEAS', deg.hyp = 0)

(4) Testing a composite ISA hypothesis against a ISA model with degree sequence (14,2,2,2):

gof4 <- gof_sim(m = 10, model = 'ISA', deg.mod = c(14,2,2,2), 
                hyp = 'ISA', deg.hyp = 0)

The non-null (gof3) and null (gof4) distributions of the test statistics can then be visualized as shown above to check their fit to the asymptotic χ²-distribution.

Performing the goodness of fit test on your data

Use function gof_test to test whether the observed data follows IEA approximations of the RSM model. The null hypotheses can be simple or composite, although the latter is not recommended for small multigraphs as it is difficult to detect a false composite hypothesis under an RSM model and under IEA models (this can be checked and verified using gof_sim to simulate these cases).

Non-rejection of the null implies that the approximations fit the data, thus implying that above statistics under the IEA models can be used to further analyze the observed network. Consider the following multigraph from the well known Florentine family network with marital. This multigraphs is aggregated based on the three actor attributes wealth (W), number of priorates (P) and total number of ties (T) which are all dichotomised to reflect high or low economic, political and social influence (details on the aggregation can be found in Shafie, 2015):

The multiplicity sequence represented as an upper triangular matrix for this mutigrpah is given by

flor_m <- t(matrix(c (0, 0, 1, 0, 0, 0, 0, 0,
                      0, 0, 0, 0, 0, 0, 0, 0,
                      0, 0, 0, 2, 0, 0, 1, 5,
                      0, 0, 0, 0, 0, 0, 1, 1,
                      0, 0, 0, 0, 0, 0, 1, 2,
                      0, 0, 0, 0, 0, 0, 2, 1,
                      0, 0, 0, 0, 0, 0, 0, 2,
                      0, 0, 0, 0, 0, 0, 0, 1), nrow= 8, ncol=8))

The equivalence of adjacency matrix for the multigraph is given by

flor_adj <- flor_m+t(flor_m)
flor_adj 
#>      [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8]
#> [1,]    0    0    1    0    0    0    0    0
#> [2,]    0    0    0    0    0    0    0    0
#> [3,]    1    0    0    2    0    0    1    5
#> [4,]    0    0    2    0    0    0    1    1
#> [5,]    0    0    0    0    0    0    1    2
#> [6,]    0    0    0    0    0    0    2    1
#> [7,]    0    0    1    1    1    2    0    2
#> [8,]    0    0    5    1    2    1    2    2

with the diagonal representing the loops double counted (Shafie, 2016). The function get_degree_seq can now be used to find the degree sequence for this multigraph:

flor_d <- get_degree_seq(adj = flor_adj, type = 'multigraph')
flor_d
#> [1]  1  0  9  4  3  3  7 13

Now we test whether the observed network fits the IEAS or the ISA model. The \(p\)-values for testing whether there is a significant difference between observed and expected edge multiplicity values according to the two approximate IEA models are given in the output tables below. Note that the asymptotic χ²-distribution has \(r-1 = (n(n+1)/2) - 1 =35\) degrees of freedom.

flor_ieas_test <- gof_test(flor_adj, 'multigraph', 'IEAS', flor_d, 35)
flor_ieas_test
#>   Stat dof Stat(obs) p-value
#> 1    S  35    15.762   0.998
#> 2    A  35    18.905   0.988
flor_isa_test <- gof_test(flor_adj, 'multigraph', 'ISA', flor_d, 35)
flor_isa_test 
#>   Stat dof Stat(obs) p-value
#> 1    S  35    16.572   0.997
#> 2    A  35    19.648   0.983

The results show that we have strong evidence for the null such that we fail to reject it. Thus, there is not a significant difference between the observed and the expected edge multiplicity sequence according on the two IEA models. Statistics derived under these models presented above can thus be used to analyze the structure of these multigraphs.

Theoretical Background

For more details regarding the theoretical background of the package, consult the following literature which the package is based on:

Shafie, T. (2015). A multigraph approach to social network analysis. Journal of Social Structure, 16. Link

Shafie, T. (2016). Analyzing local and global properties of multigraphs. The Journal of Mathematical Sociology, 40(4), 239-264. Link

Shafie, T., Schoch, D. (2021) Multiplexity analysis of networks using multigraph representations. Statistical Methods & Applications 30, 1425–1444. Link

Shafie, T. (2023). Goodness of fit tests for random multigraph models, Journal of Applied Statistics, 50:15, 3062-3087. Link