This vignette showcases how the mlr3pipelines package
can be extended to include custom PipeOps. To run the
following examples, we will need a Task; we are using the
well-known “Iris” task:
library("mlr3")
task = tsk("iris")
task$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa 1.4 0.2 5.1 3.5
## 2: setosa 1.4 0.2 4.9 3.0
## 3: setosa 1.3 0.2 4.7 3.2
## 4: setosa 1.5 0.2 4.6 3.1
## 5: setosa 1.4 0.2 5.0 3.6
## ---
## 146: virginica 5.2 2.3 6.7 3.0
## 147: virginica 5.0 1.9 6.3 2.5
## 148: virginica 5.2 2.0 6.5 3.0
## 149: virginica 5.4 2.3 6.2 3.4
## 150: virginica 5.1 1.8 5.9 3.0mlr3pipelines is fundamentally built around R6. When planning to
create custom PipeOp objects, it can only help to familiarize yourself with
it.
In principle, all a PipeOp must do is inherit from the
PipeOp R6 class and implement the .train() and
.predict() functions. There are, however, several auxiliary
subclasses that can make the creation of certain operations
much easier.
PipeOpCopyA very simple yet useful PipeOp is
PipeOpCopy, which takes a single input and creates a
variable number of output channels, all of which receive a copy of the
input data. It is a simple example that showcases the important steps in
defining a custom PipeOp. We will show a simplified version
here, PipeOpCopyTwo, that creates exactly
two copies of its input data.
PipeOpThe first part of creating a custom PipeOp is inheriting
from PipeOp. We make a mental note that we need to
implement a .train() and a .predict()
function, and that we probably want to have an initialize()
as well:
PipeOpCopyTwo = R6::R6Class("PipeOpCopyTwo",
inherit = mlr3pipelines::PipeOp,
public = list(
initialize = function(id = "copy.two") {
....
},
),
private == list(
.train = function(inputs) {
....
},
.predict = function(inputs) {
....
}
)
)Note, that private methods, e.g. .train
and .predict etc are prefixed with a ..
We need to tell the PipeOp the layout of its channels:
How many there are, what their names are going to be, and what types are
acceptable. This is done on initialization of the PipeOp
(using a super$initialize call) by giving the
input and output data.table
objects. These must have three columns: a "name" column
giving the names of input and output channels, and a
"train" and "predict" column naming the class
of objects we expect during training and prediction as input / output. A
special value for these classes is "*", which indicates
that any class will be accepted; our simple copy operator accepts any
kind of input, so this will be useful. We have only one input, but two
output channels.
By convention, we name a single channel "input" or
"output", and a group of channels ["input1",
"input2", …], unless there is a reason to give specific
different names. Therefore, our input
data.table will have a single row
<"input", "*", "*">, and our output
table will have two rows, <"output1", "*", "*"> and
<"output2", "*", "*">.
All of this is given to the PipeOp creator. Our
initialize() will thus look as follows:
initialize = function(id = "copy.two") {
input = data.table::data.table(name = "input", train = "*", predict = "*")
# the following will create two rows and automatically fill the `train`
# and `predict` cols with "*"
output = data.table::data.table(
name = c("output1", "output2"),
train = "*", predict = "*"
)
super$initialize(id,
input = input,
output = output
)
}Both .train() and .predict() will receive a
list as input and must give a list in return.
According to our input and output definitions,
we will always get a list with a single element as input, and will need
to return a list with two elements. Because all we want to do is create
two copies, we will just create the copies using
c(inputs, inputs).
Two things to consider:
The .train() function must always modify the
self$state variable to something that is not
NULL or NO_OP. This is because the
$state slot is used as a signal that PipeOp
has been trained on data, even if the state itself is not important to
the PipeOp (as in our case). Therefore, our
.train() will set
self$state = list().
It is not necessary to “clone” our input or make deep copies,
because we don’t modify the data. However, if we were changing a
reference-passed object, for example by changing data in a
Task, we would have to make a deep copy first. This is
because a PipeOp may never modify its input object by
reference.
Our .train() and .predict() functions are
now:
.train = function(inputs) {
self$state = list()
c(inputs, inputs)
}.predict = function(inputs) {
c(inputs, inputs)
}The whole definition thus becomes
PipeOpCopyTwo = R6::R6Class("PipeOpCopyTwo",
inherit = mlr3pipelines::PipeOp,
public = list(
initialize = function(id = "copy.two") {
super$initialize(id,
input = data.table::data.table(name = "input", train = "*", predict = "*"),
output = data.table::data.table(name = c("output1", "output2"),
train = "*", predict = "*")
)
}
),
private = list(
.train = function(inputs) {
self$state = list()
c(inputs, inputs)
},
.predict = function(inputs) {
c(inputs, inputs)
}
)
)We can create an instance of our PipeOp, put it in a
graph, and see what happens when we train it on something:
library("mlr3pipelines")
poct = PipeOpCopyTwo$new()
gr = Graph$new()
gr$add_pipeop(poct)
print(gr)## Graph with 1 PipeOps:
## ID State sccssors prdcssors
## <char> <char> <char> <char>
## copy.two <<UNTRAINED>>result = gr$train(task)
str(result)## List of 2
## $ copy.two.output1:Classes 'TaskClassif', 'TaskSupervised', 'Task', 'R6' <TaskClassif:iris>
## $ copy.two.output2:Classes 'TaskClassif', 'TaskSupervised', 'Task', 'R6' <TaskClassif:iris>Many PipeOps perform an operation on exactly one
Task, and return exactly one Task. They may
even not care about the “Target” / “Outcome” variable of that task, and
only do some modification of some input data. However, it is usually
important to them that the Task on which they perform
prediction has the same data columns as the Task on which
they train. For these cases, the auxiliary base class
PipeOpTaskPreproc exists. It inherits from
PipeOp itself, and other PipeOps should use it
if they fall in the kind of use-case named above.
When inheriting from PipeOpTaskPreproc, one must either
implement the private methods .train_task() and
.predict_task(), or the methods .train_dt(),
.predict_dt(), depending on whether wants to operate on a
Task object or on its data as data.tables. In
the second case, one can optionally also overload the
.select_cols() method, which chooses which of the incoming
Task’s features are given to the .train_dt() /
.predict_dt() functions.
The following will show two examples: PipeOpDropNA,
which removes a Task’s rows with missing values during
training (and implements .train_task() and
.predict_task()), and PipeOpScale, which
scales a Task’s numeric columns (and implements
.train_dt(), .predict_dt(), and
.select_cols()).
PipeOpDropNADropping rows with missing values may be important when training a model that can not handle them.
Because mlr3
Tasks only contain a view to the underlying data, it is not
necessary to modify data to remove rows with missing values. Instead,
the rows can be removed using the Task’s
$filter method, which modifies the Task
in-place. This is done in the private method .train_task().
We take care that we also set the $state slot to signal
that the PipeOp was trained.
The private method .predict_task() does not need to do
anything; removing missing values during prediction is not as useful,
since learners that cannot handle them will just ignore the respective
rows. Furthermore, mlr3 expects a
Learner to always return just as many predictions as it was
given input rows, so a PipeOp that removes
Task rows during training can not be used inside a
GraphLearner.
When we inherit from PipeOpTaskPreproc, it sets the
input and output data.tables for
us to only accept a single Task. The only thing we do
during initialize() is therefore to set an id
(which can optionally be changed by the user).
The complete PipeOpDropNA can therefore be written as
follows. Note that it inherits from PipeOpTaskPreproc,
unlike the PipeOpCopyTwo example from above:
PipeOpDropNA = R6::R6Class("PipeOpDropNA",
inherit = mlr3pipelines::PipeOpTaskPreproc,
public = list(
initialize = function(id = "drop.na") {
super$initialize(id)
}
),
private = list(
.train_task = function(task) {
self$state = list()
featuredata = task$data(cols = task$feature_names)
exclude = apply(is.na(featuredata), 1, any)
task$filter(task$row_ids[!exclude])
},
.predict_task = function(task) {
# nothing to be done
task
}
)
)To test this PipeOp, we create a small task with missing
values:
smalliris = iris[(1:5) * 30, ]
smalliris[1, 1] = NA
smalliris[2, 2] = NA
sitask = as_task_classif(smalliris, target = "Species")
print(sitask$data())## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa 1.6 0.2 NA 3.2
## 2: versicolor 3.9 1.4 5.2 NA
## 3: versicolor 4.0 1.3 5.5 2.5
## 4: virginica 5.0 1.5 6.0 2.2
## 5: virginica 5.1 1.8 5.9 3.0We test this by feeding it to a new Graph that uses
PipeOpDropNA.
gr = Graph$new()
gr$add_pipeop(PipeOpDropNA$new())
filtered_task = gr$train(sitask)[[1]]
print(filtered_task$data())## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: versicolor 4.0 1.3 5.5 2.5
## 2: virginica 5.0 1.5 6.0 2.2
## 3: virginica 5.1 1.8 5.9 3.0PipeOpScaleAlwaysAn often-applied preprocessing step is to simply
center and/or scale the data to mean
\(0\) and standard deviation \(1\). This fits the
PipeOpTaskPreproc pattern quite well. Because it always
replaces all columns that it operates on, and does not require any
information about the task’s target, it only needs to overload the
.train_dt() and .predict_dt() functions. This
saves some boilerplate-code from getting the correct feature columns out
of the task, and replacing them after modification.
Because scaling only makes sense on numeric features, we want to
instruct PipeOpTaskPreproc to give us only these numeric
columns. We do this by overloading the .select_cols()
function: It is called by the class to determine which columns to pass
to .train_dt() and .predict_dt(). Its input is
the Task that is being transformed, and it should return a
character vector of all features to work with. When it is
not overloaded, it uses all columns; instead, we will set it to only
give us numeric columns. Because the levels() of the data
table given to .train_dt() and .predict_dt()
may be different from the Task’s levels, these functions
must also take a levels argument that is a named list of
column names indicating their levels. When working with numeric data,
this argument can be ignored, but it should be used instead of
levels(dt[[column]]) for factorial or character
columns.
This is the first PipeOp where we will be using the
$state slot for something useful: We save the centering
offset and scaling coefficient and use it in
$.predict()!
For simplicity, we are not using hyperparameters and will always
scale and center all data. Compare this PipeOpScaleAlways
operator to the one defined inside the mlr3pipelines
package, PipeOpScale.
PipeOpScaleAlways = R6::R6Class("PipeOpScaleAlways",
inherit = mlr3pipelines::PipeOpTaskPreproc,
public = list(
initialize = function(id = "scale.always") {
super$initialize(id = id)
}
),
private = list(
.select_cols = function(task) {
task$feature_types[type == "numeric", id]
},
.train_dt = function(dt, levels, target) {
sc = scale(as.matrix(dt))
self$state = list(
center = attr(sc, "scaled:center"),
scale = attr(sc, "scaled:scale")
)
sc
},
.predict_dt = function(dt, levels) {
t((t(dt) - self$state$center) / self$state$scale)
}
)
)(Note for the observant: If you check PipeOpScale.R
from the mlr3pipelines package, you will notice that is
uses “get("type")” and “get("id")” instead of
“type” and “id”, because the static code
checker on CRAN would otherwise complain about references to undefined
variables. This is a “problem” with data.table and not
exclusive to mlr3pipelines.)
We can, again, create a new Graph that uses this
PipeOp to test it. Compare the resulting data to the
original “iris” Task data printed at the beginning:
gr = Graph$new()
gr$add_pipeop(PipeOpScaleAlways$new())
result = gr$train(task)
result[[1]]$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa -1.3357516 -1.3110521 -0.89767388 1.01560199
## 2: setosa -1.3357516 -1.3110521 -1.13920048 -0.13153881
## 3: setosa -1.3923993 -1.3110521 -1.38072709 0.32731751
## 4: setosa -1.2791040 -1.3110521 -1.50149039 0.09788935
## 5: setosa -1.3357516 -1.3110521 -1.01843718 1.24503015
## ---
## 146: virginica 0.8168591 1.4439941 1.03453895 -0.13153881
## 147: virginica 0.7035638 0.9192234 0.55148575 -1.27867961
## 148: virginica 0.8168591 1.0504160 0.79301235 -0.13153881
## 149: virginica 0.9301544 1.4439941 0.43072244 0.78617383
## 150: virginica 0.7602115 0.7880307 0.06843254 -0.13153881It is possible to make even further simplifications for many
PipeOps that perform mostly the same operation during
training and prediction. The point of Task preprocessing is
often to modify the training data in mostly the same way as prediction
data (but in a way that may depend on training data).
Consider constant feature removal, for example: The goal is to remove features that have no variance, or only a single factor level. However, what features get removed must be decided during training, and may only depend on training data. Furthermore, the actual process of removing features is the same during training and prediction.
A simplification to make is therefore to have a private method
.get_state(task) which sets the $state slot
during training, and a private method .transform(task),
which gets called both during training and prediction. This is
done in the PipeOpTaskPreprocSimple class. Just like
PipeOpTaskPreproc, one can inherit from this and overload
these functions to get a PipeOp that performs preprocessing
with very little boilerplate code.
Just like PipeOpTaskPreproc,
PipeOpTaskPreprocSimple offers the possibility to instead
overload the .get_state_dt(dt, levels) and
.transform_dt(dt, levels) methods (and optionally, again,
the .select_cols(task) function) to operate on
data.table feature data instead of the whole
Task.
Even some methods that do not use
PipeOpTaskPreprocSimple could work in a similar
way: The PipeOpScaleAlways example from above will be shown
to also work with this paradigm.
PipeOpDropConstA typical example of a preprocessing operation that does almost the
same operation during training and prediction is an operation that drops
features depending on a criterion that is evaluated during training. One
simple example of this is dropping constant features. Because the mlr3
Task class offers a flexible view on underlying data, it is
most efficient to drop columns from the task directly using its
$select() function, so the
.get_state_dt(dt, levels) /
.transform_dt(dt, levels) functions will not get
used; instead we overload the .get_state(task) and
.transform(task) methods.
The .get_state() function’s result is saved to the
$state slot, so we want to return something that is useful
for dropping features. We choose to save the names of all the columns
that have nonzero variance. For brevity, we use
length(unique(column)) > 1 to check whether more than
one distinct value is present; a more sophisticated version could have a
tolerance parameter for numeric values that are very close to each
other.
The .transform() method is evaluated both during
training and prediction, and can rely on the
$state slot being present. All it does here is call the
Task$select function with the columns we chose to keep.
The full PipeOp could be written as follows:
PipeOpDropConst = R6::R6Class("PipeOpDropConst",
inherit = mlr3pipelines::PipeOpTaskPreprocSimple,
public = list(
initialize = function(id = "drop.const") {
super$initialize(id = id)
}
),
private = list(
.get_state = function(task) {
data = task$data(cols = task$feature_names)
nonconst = sapply(data, function(column) length(unique(column)) > 1)
list(cnames = colnames(data)[nonconst])
},
.transform = function(task) {
task$select(self$state$cnames)
}
)
)This can be tested using the first five rows of the “Iris”
Task, for which one feature ("Petal.Width") is
constant:
irishead = task$clone()$filter(1:5)
irishead$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa 1.4 0.2 5.1 3.5
## 2: setosa 1.4 0.2 4.9 3.0
## 3: setosa 1.3 0.2 4.7 3.2
## 4: setosa 1.5 0.2 4.6 3.1
## 5: setosa 1.4 0.2 5.0 3.6gr = Graph$new()$add_pipeop(PipeOpDropConst$new())
dropped_task = gr$train(irishead)[[1]]
dropped_task$data()## Species Petal.Length Sepal.Length Sepal.Width
## <fctr> <num> <num> <num>
## 1: setosa 1.4 5.1 3.5
## 2: setosa 1.4 4.9 3.0
## 3: setosa 1.3 4.7 3.2
## 4: setosa 1.5 4.6 3.1
## 5: setosa 1.4 5.0 3.6We can also see that the $state was correctly set.
Calling $.predict() with this graph, even with different
data (the whole Iris Task!) will still drop the
"Petal.Width" column, as it should.
gr$pipeops$drop.const$state## $cnames
## [1] "Petal.Length" "Sepal.Length" "Sepal.Width"
##
## $affected_cols
## [1] "Petal.Length" "Petal.Width" "Sepal.Length" "Sepal.Width"
##
## $intasklayout
## Key: <id>
## id type
## <char> <char>
## 1: Petal.Length numeric
## 2: Petal.Width numeric
## 3: Sepal.Length numeric
## 4: Sepal.Width numeric
##
## $outtasklayout
## Key: <id>
## id type
## <char> <char>
## 1: Petal.Length numeric
## 2: Sepal.Length numeric
## 3: Sepal.Width numeric
##
## $outtaskshell
## Empty data.table (0 rows and 4 cols): Species,Petal.Length,Sepal.Length,Sepal.Widthdropped_predict = gr$predict(task)[[1]]
dropped_predict$data()## Species Petal.Length Sepal.Length Sepal.Width
## <fctr> <num> <num> <num>
## 1: setosa 1.4 5.1 3.5
## 2: setosa 1.4 4.9 3.0
## 3: setosa 1.3 4.7 3.2
## 4: setosa 1.5 4.6 3.1
## 5: setosa 1.4 5.0 3.6
## ---
## 146: virginica 5.2 6.7 3.0
## 147: virginica 5.0 6.3 2.5
## 148: virginica 5.2 6.5 3.0
## 149: virginica 5.4 6.2 3.4
## 150: virginica 5.1 5.9 3.0PipeOpScaleAlwaysSimpleThis example will show how a PipeOpTaskPreprocSimple can
be used when only working on feature data in form of a
data.table. Instead of calling the scale()
function, the center and scale values are
calculated directly and saved to the $state slot. The
.transform_dt() function will then perform the same
operation during both training and prediction: subtract the
center and divide by the scale value. As in
the PipeOpScaleAlways
example above, we use .select_cols() so that we only
work on numeric columns.
PipeOpScaleAlwaysSimple = R6::R6Class("PipeOpScaleAlwaysSimple",
inherit = mlr3pipelines::PipeOpTaskPreprocSimple,
public = list(
initialize = function(id = "scale.always.simple") {
super$initialize(id = id)
}
),
private = list(
.select_cols = function(task) {
task$feature_types[type == "numeric", id]
},
.get_state_dt = function(dt, levels, target) {
list(
center = sapply(dt, mean),
scale = sapply(dt, sd)
)
},
.transform_dt = function(dt, levels) {
t((t(dt) - self$state$center) / self$state$scale)
}
)
)We can compare this PipeOp to the one above to show that
it behaves the same.
gr = Graph$new()$add_pipeop(PipeOpScaleAlways$new())
result_posa = gr$train(task)[[1]]
gr = Graph$new()$add_pipeop(PipeOpScaleAlwaysSimple$new())
result_posa_simple = gr$train(task)[[1]]result_posa$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa -1.3357516 -1.3110521 -0.89767388 1.01560199
## 2: setosa -1.3357516 -1.3110521 -1.13920048 -0.13153881
## 3: setosa -1.3923993 -1.3110521 -1.38072709 0.32731751
## 4: setosa -1.2791040 -1.3110521 -1.50149039 0.09788935
## 5: setosa -1.3357516 -1.3110521 -1.01843718 1.24503015
## ---
## 146: virginica 0.8168591 1.4439941 1.03453895 -0.13153881
## 147: virginica 0.7035638 0.9192234 0.55148575 -1.27867961
## 148: virginica 0.8168591 1.0504160 0.79301235 -0.13153881
## 149: virginica 0.9301544 1.4439941 0.43072244 0.78617383
## 150: virginica 0.7602115 0.7880307 0.06843254 -0.13153881result_posa_simple$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa -1.3357516 -1.3110521 -0.89767388 1.01560199
## 2: setosa -1.3357516 -1.3110521 -1.13920048 -0.13153881
## 3: setosa -1.3923993 -1.3110521 -1.38072709 0.32731751
## 4: setosa -1.2791040 -1.3110521 -1.50149039 0.09788935
## 5: setosa -1.3357516 -1.3110521 -1.01843718 1.24503015
## ---
## 146: virginica 0.8168591 1.4439941 1.03453895 -0.13153881
## 147: virginica 0.7035638 0.9192234 0.55148575 -1.27867961
## 148: virginica 0.8168591 1.0504160 0.79301235 -0.13153881
## 149: virginica 0.9301544 1.4439941 0.43072244 0.78617383
## 150: virginica 0.7602115 0.7880307 0.06843254 -0.13153881mlr3pipelines uses the paradox package to
define parameter spaces for PipeOps. Parameters for
PipeOps can modify their behavior in certain ways,
e.g. switch centering or scaling off in the PipeOpScale
operator. The unified interface makes it possible to have parameters for
whole Graphs that modify the individual
PipeOp’s behavior. The Graphs, when
encapsulated in GraphLearners, can even be tuned using the
tuning functionality in mlr3tuning.
Hyperparameters are declared during initialization, when calling the
PipeOp’s $initialize() function, by giving a
param_set argument. The param_set must be a
ParamSet from the paradox package; see
its documentation for more information on how to define parameter
spaces. After construction, the ParamSet can be accessed
through the $param_set slot. While it is possible
to modify this ParamSet, using e.g. the $add()
and $add_dep() functions, after adding it to the
PipeOp, it is strongly advised against.
Hyperparameters can be set and queried through the
$values slot. When setting hyperparameters, they are
automatically checked to satisfy all conditions set by the
$param_set, so it is not necessary to type check them. Be
aware that it is always possible to remove hyperparameter
values.
When a PipeOp is initialized, it usually does not have
any parameter values—$values takes the value
list(). It is possible to set initial parameter values in
the $initialize() constructor; this must be done
after the super$initialize() call where the
corresponding ParamSet must be supplied. This is because
setting $values checks against the current
$param_set, which would fail if the $param_set
was not set yet.
When using an underlying library function (the scale
function in PipeOpScale, say), then there is usually a
“default” behaviour of that function when a parameter is not given. It
is good practice to use this default behaviour whenever a parameter is
not set (or when it was removed). This can easily be done when using the
mlr3misc
library’s mlr3misc::invoke() function, which has
functionality similar to "do.call()".
PipeOpScaleHow to use hyperparameters can best be shown through the example of
PipeOpScale, which is very similar to the example above,
PipeOpScaleAlways. The difference is made by the presence
of hyperparameters. PipeOpScale constructs a
ParamSet in its $initialize function and
passes this on to the super$initialize function:
PipeOpScale$public_methods$initialize## function (id = "scale", param_vals = list())
## .__PipeOpScale__initialize(self = self, private = private, super = super,
## id = id, param_vals = param_vals)
## <environment: namespace:mlr3pipelines>The user has access to this and can set and get parameters. Types are automatically checked:
pss = po("scale")
print(pss$param_set)## <ParamSet:scale>
## id class lower upper nlevels
## <char> <char> <num> <num> <num>
## 1: center ParamLgl NA NA 2
## 2: scale ParamLgl NA NA 2
## 3: robust ParamLgl NA NA 2
## 4: affect_columns ParamUty NA NA Inf
## default
## <list>
## 1: TRUE
## 2: TRUE
## 3: <NoDefault>\n Public:\n clone: function (deep = FALSE) \n initialize: function ()
## 4: <Selector[1]>
## value
## <list>
## 1:
## 2:
## 3: FALSE
## 4:pss$param_set$values$center = FALSE
print(pss$param_set$values)## $robust
## [1] FALSE
##
## $center
## [1] FALSEpss$param_set$values$scale = "TRUE" # bad input is checked!## Error in self$assert(xs): Assertion on 'xs' failed: scale: Must be of type 'logical flag', not 'character'.How PipeOpScale handles its parameters can be seen in
its $.train_dt method: It gets the relevant parameters from
its $values slot and uses them in the
mlr3misc::invoke() call. This has the advantage over
calling scale() directly that if a parameter is not given,
its default value from the "scale()" function will be
used.
PipeOpScale$private_methods$.train_dt## function (dt, levels, target)
## .__PipeOpScale__.train_dt(self = self, private = private, super = super,
## dt = dt, levels = levels, target = target)
## <environment: namespace:mlr3pipelines>Another change that is necessary compared to
PipeOpScaleAlways is that the attributes
"scaled:scale" and "scaled:center" are not
always present, depending on parameters, and possibly need to be set to
default values \(1\) or \(0\), respectively.
It is now even possible (if a bit pointless) to call
PipeOpScale with both scale and
center set to FALSE, which returns the
original dataset, unchanged.
pss$param_set$values$scale = FALSE
pss$param_set$values$center = FALSE
gr = Graph$new()
gr$add_pipeop(pss)
result = gr$train(task)
result[[1]]$data()## Species Petal.Length Petal.Width Sepal.Length Sepal.Width
## <fctr> <num> <num> <num> <num>
## 1: setosa 1.4 0.2 5.1 3.5
## 2: setosa 1.4 0.2 4.9 3.0
## 3: setosa 1.3 0.2 4.7 3.2
## 4: setosa 1.5 0.2 4.6 3.1
## 5: setosa 1.4 0.2 5.0 3.6
## ---
## 146: virginica 5.2 2.3 6.7 3.0
## 147: virginica 5.0 1.9 6.3 2.5
## 148: virginica 5.2 2.0 6.5 3.0
## 149: virginica 5.4 2.3 6.2 3.4
## 150: virginica 5.1 1.8 5.9 3.0