# Introduction

As indicated by the name, `assess()`

is used to assess a model estimated using the `csem()`

function.

In **cSEM** model assessement is considered to be any task that in some way or another seeks to assess the quality of the estimated model *without conducting* *a statistical test* (tests are covered by the `test_*`

family of functions). Quality in this case is taken to be a catch-all term for all common aspects of model assessment. This mainly comprises fit indices, reliability estimates, common validity assessment criteria, effect sizes, and other related quality measures/indices that do not rely on a formal test procedure. Hereinafter, we will refer to a generic (fit) index, quality or assessment measure as a **quality criterion**.

Currently the following quality criteria are implemented:

- Convergent and discriminant validity assessment:
- The
**average variance extracted**(AVE) - The
**Fornell-Larcker**criterion - The
**heterotrait-monotrait ratio of correlations**(HTMT)

- The
**Congeneric reliability**(\(\rho_C\)), also known as e.g.: composite reliability, construct reliability, (unidimensional) omega, Jöreskog’s \(\rho\), \(\rho_A\), or \(\rho_B\).**Tau-equivalent reliability**(\(\rho_T\)), also known as e.g.: Cronbach alpha, alpha, \(\alpha\), coefficient alpha, Guttman’s \(\lambda_3\), KR-20.- Distance measures
- The
**standardized root mean square residual**(SRMR) - The
**geodesic distance**(DG) - The
**squared Euclidian distance**(DL) - The
**maximum-likelihood distance**(DML)

- The
- Fit indices
- The \(\chi^2\)-
**statistic** - The \(\chi^2/df\)-
**statistic** - The
**comparative fit index**(CFI) - The
**goodness-of-fit index**(GFI) - The
**standardized root mean square residual**(SRMR) - The
**root mean square error of approximation**(RMSEA) - The
**normed fit index**(NFI) - The
**non-normed fit index**(NNFI) - The
**comparative fit index**(CFI) - The
**incremental fit index**(IFI) - The
**root mean square outer residual covariance**(\(\text{RMS}_{\theta}\)) in two alternative versions

- The \(\chi^2\)-
- The
**Goodness-of-Fit**(GoF) proposed by Tenenhaus, Amanto, and Vinzi (2004). - The
**variance inflation factors**(VIF) for the structural equations as well as for Mode B regression equations (if`.approach_weights = "PLS-PM"`

). - The coefficient of determination and the adjusted coefficient of determination (\(R^2\) and \(R^2_{adj}\))
- A measure of the
**effect size**(Cohen’s \(f^2\)). - Direct, indirect and total effect assessment.

For implementation details see the Methods & Formulae section.

# Syntax & Options

```
assess(
.object = NULL,
.only_common_factors = TRUE,
.quality_criterion = c("all", "ave", "rho_C", "rho_C_mm", "rho_C_weighted",
"rho_C_weighted_mm", "cronbachs_alpha",
"cronbachs_alpha_weighted", "dg", "dl", "dml", "df",
"f2", "chi_square", "chi_square_df",
"cfi", "gfi", "ifi", "nfi", "nnfi",
"reliability",
"rmsea", "rms_theta", "srmr",
"gof", "htmt", "r2", "r2_adj",
"rho_T", "rho_T_weighted", "vif",
"vifmodeB", "fl_criterion"),
...
)
```

`.object`

An object of class

`cSEMResults`

resulting from a call to`csem()`

.`.quality_criterion`

A character string or a vector of character strings naming the quality criterion to compute. By default all quality criteria are computed (

`"all"`

). See`assess()`

for a list of possible candidates.`.only_common_factors`

Logical. Should only concepts modeled as common factors be included when calculating one of the following quality criteria: AVE, the Fornell-Larcker criterion, HTMT, and all reliability estimates. Defaults to

`TRUE`

.`...`

Further arguments passed to functions called by

`assess()`

. See args_assess_dotdotdot for a complete list of available arguments.

Like all postestimation functions `assess()`

can be called on any object of class `cSEMResults`

. The output is a named list of the quality criteria given to `.quality_criterion`

. By default all possible quality criteria a calculated (`.quality_criterion = "all"`

).

## Details

In line with all of **cSEM**’s postestimation functions, `assess()`

is a generic function with methods for objects of class `cSEMResults_default`

, `cSEMResults_multi`

, `cSEMResults_2ndorder`

. In **cSEM** every `cSEMResults_*`

object must also have class `cSEMResults`

for internal reasons. When using one of the major postestimation functions, method dispatch is therefore technically done on one of the `cSEMResults_*`

class attributes, ignoring the `cSEMResults`

class attribute. As long as `assess()`

is used directly method dispatch is not of any practical concern to the end-users. The difference, however, becomes important if a user seeks to directly invoke an internal function which is called by `assess()`

(e.g., `cSEM:::calculateAVE()`

or `cSEM:::calculateHTMT()`

). In this case only objects of class `cSEMResults_default`

are accepted as this ensures a specific structure. Therefore, it is important to remember that *internal functions in cSEM are generally not generic*!

Update (24.02.2020): from version 0.2.0 onwards all functions that assess() calls internally will be exported. This mean users can directly invoke functions such as e.g.,

`calculateHTMT()`

or`calculateRhoT()`

. These functions will also be generic accepting all types of cSEMResults classes.

### Composite models vs. common factor models

Some assessment measures are inherently tied to the common factor model. It is therefore unclear how to interpret their results in the context of a composite model. Consequently, their computation is suppressed by default for constructs modeled as composites. Currently, this applies to the following quality criteria:

- AVE and validity assessment based theron (i.e., the Fornell-Larcker criterion)
- HTMT and validity assessment based theron
- All reliability measures

It is possible to force computation of all quality criteria for constructs modeled as composites using `.only_common_factors = FALSE`

, however, we explicitly warn to interpret results, as they may not even have a conceptual meaning.

All quality criteria assume that the estimated loadings, construct correlations and path coefficients involved in the computation of a specific qualitiy measure are consistent estimates for their theoretical population counterpart. If the user deliberately chooses an approach that yields inconsistent estimates (by setting `.disattenuate = FALSE`

in `csem()`

when the estimated model contains constructs modeled as common factors) `assess()`

will still estimate all quantities, however, quantities such as the AVE or the congeneric reliability \(\rho_C\) inherit inconsistency.

# Methods & Formulae

This section provides technical details and relevant formulae. For the relevant notation and terminology used in this section, see the Notation and the Termionology help files.

## Average Variance Extracted (AVE)

### Definition

The average variance extracted (AVE) was first proposed by Fornell and Larcker (1981). Several definitions exist. For ease of comparison to extant literature the most common definitions are given below:

- The AVE for a generic construct/latent variable \(\eta\) is an estimate of how much of the variation of its indicators is due to the assumed latent variable. Consequently, the share of unexplained, i.e. error variation is 1 - AVE.
- The AVE for a generic construct/latent variable \(\eta\) is the share of the total indicator variance (i.e., the sum of the indicator variances of all indicators connected to the construct), that is captured by the (indicator) true scores.
- The AVE for a generic construct/latent variable \(\eta\) is the ratio of the sum of the (indicator) true score variances (explained variation) relative to the sum of the total indicator variances (total variation, i.e., the sum of the indicator variances of all indicators connected to the construct).
- Since for the regression of \(x_k\) on \(\eta_k\), the R squared (\(R^2_k)\) is equal to the share of variation of \(x_k\) explained by \(\eta_k\) relative to the total variation of \(x_k\), the AVE for a generic construct/latent variable \(\eta\) is equal to the average over all \(R^2_k\).
- The AVE for a generic construct/latent variable \(\eta\) is the sum of the squared correlation between indicator \(x_k\) and the (indicator) true score \(\eta_k\) relative to the sum of the indicator variances of all indicators connected to the construct in question.

It is important to stress that, although different in wording, all definitions are synonymous!

The AVE is inherently tied to the common factor model. It is therefore unclear how to interpret the AVE for constructs modeled as composites. Consequently, the computation is suppressed by default for constructs modeled as common factors. It is possible to force computation of the AVE for constructs modeled as composites using `.only_common_factors = FALSE`

, however, we explicitly warn to interpret results, as they may not even have a conceptual meaning.

### Formulae

Using the results and notation derived and defined in the Notation help file, the AVE for a generic construct is: \[ AVE = \frac{\text{Sum indicator true score variances}}{\text{Sum indicator variances}} = \frac{\sum Var(\eta_k)}{\sum Var(x_k)} = \frac{\sum\lambda^2_k}{\sum(\lambda^2_k + Var(\varepsilon_k))}\] If \(x_k\) is standardized (i.e., \(Var(x_k) = 1\)) the denominator reduces to \(K\) and the AVE for a generic construct is: \[ AVE = \frac{1}{K}\sum \lambda^2_k = \frac{1}{K}\sum \rho_{x_k, \eta}^2\] As an important consequence, the AVE is closely tied to the communality. **Communality** (\(COM_k\)) is definied as the proportion of variation in an indicator that is explained by its common factor. Empirically, it is the square of the standardized loading of the \(k\)’th indicator (\(\lambda^2_k\)). Since indicators, scores/proxies and subsequently loadings are always standardized in **cSEM**, the squared loading is simply the squared correlation between the indicator and its related construct/common factor. The AVE is also directly related to the **indicator reliability**, defined as the squared correlation between an indicator \(k\) and its related proxy true score (see section Reliability below), which is again simply \(\lambda^2_k\). Therefore in **cSEM** we always have:

\[ AVE = \frac{1}{K}\sum COM_k = \frac{1}{K}\sum \text{Indicator reliability}_k = \frac{1}{K}\sum\lambda^2_k = \frac{1}{K}\sum R^2_k \]

### Implementation

The function is implemented as: `calculateAVE()`

. It may be called directly using R’s `:::`

mechanism.

### See also

The AVE is the basis for the Fornell-Larcker criterion.

## Degrees of freedom

### Definition

Degrees of freedom are calculated as the difference between the number of non-redundant free elements of the empirical indicator correlation matrix \(\boldsymbol{\mathbf{S}}\) and the model parameters.

Although, composite-based estimators retrieve parameters of the postulated models by forming composites, which involves the estimation of weights the computation of the degrees of freedom eventually depends on the postulated model and the parameters implied by the model. Most notably, a common factor model estimated by a composite-based approach such as PLS has the same degrees of freedom compared to e.g., classical maximum likelihood estimation of the same model.

### Formulae

\[ \begin{align} df &= \text{# non-redundant off-diagonal elements of the empirical indicator correlation matrix $\boldsymbol{\mathbf{S}}$} \\ &- \text{# model parameters} \end{align} \]

If the model contains only linear terms the model parameters are:

- # free correlations between exogenous constructs
- # specified correlations between endogenous constructs
- # structural parameters

In addition, for each construct \(\eta_j\):

- # of loadings if \(\eta_j\) is modeled as a common factor
- # of specified measurement error correlations between items of constructs \(\eta_j\) if \(\eta_j\) is modeled as a common factor
- # of weights of \(\eta_j\)
**minus 1**if \(\eta_j\) is modeled as a composite. One weight per block is fixed and hence not counted as a model parameter since the variance of the composite is scaled to be unity. - # of non-redundant off-diagonal elements of \(\boldsymbol{\mathbf{\Sigma}}_j\) if \(\eta_j\) is modeled as a composite.

If the model contains second-order terms the model parameters are similar:

- # free correlations between exogenous constructs
- # specified correlations between endogenous constructs
- # structural parameters. Note: relations between constructs measuring/forming the second-order construct are not path!

In addition, for each construct \(\eta_j\) (including the second-order constructs):

- # of loadings if \(\eta_j\) is modeled as a common factor
- # of specified measurement error correlations between items of constructs \(\eta_j\) if \(\eta_j\) is modeled as a common factor
- # of weights of \(\eta_j\)
**minus 1**if \(\eta_j\) is modeled as a composite. One weight per block is fixed and hence not counted as a model parameter since the variance of the composite is scaled to be unity. - # of non-redundant off-diagonal elements of \(\boldsymbol{\mathbf{\Sigma}}_j\) if \(\eta_j\) is modeled as a composite.

#### Notes

- If all constructs are allowed to freely covary, i.e., there is no structural model and no structural parameters, all constructs are considered exogenous.
- If the strucutral model contains nonlinear terms (e.g., \(\eta^2_1\) or \(\eta_1\eta_2\)), degrees of freedom computation is currently unclear (at least to us). A warning is printed to inform the user that the calculation is may not be correct.

### Implementation

The function is implemented as `calculateDf()`

.

### See also:

Degrees of freedom are required for several fit measures.

## Fit Indices

### Definition

Fit indices for confirmatory factor analysis (CFA) were first introduced by Bentler and Bonett (1980). Since then a large number of indices has been defined. Contrary to exact tests of model fit, the purpose of fit indices is to measure the fit of a structural equation model on a continuous scale. For normed fit indices this scale is between 0 and 1. Fit indices can be divided into two classes:

- ‘badness of fit’ (resp. ‘lack of fit’) indices; a smaller value indicates a better fit.
- ‘goodness of fit’ indices; a higher value represents a better fit.

Several studies have analyzed the empirical and theoretical properties of fit indices in the context of CFA where concepts are expressed by latent variables. only little is known about the properties and the performance of fit indices in composite models and for models estimated using a composite-based approach. **cSEM** offers a number of fit indices that are known from factor-based SEM. However, applied users should be aware that only little is known about their applicability, intuition, and interpretability in the context of models containing constructs modeled as composites or for models estimated using a composite-based approach.

Independent of the approach and model used, a particularily controversial issue are cutoff values for fit indices (e.g., Marsh, Hau, and Wen 2004). In factor-based SEM cutoff values are rather popular. The basis for these are numerous simulation studies, most notably Hu and Bentler (1999). In contrast for composite models - for better or worse - no cutoff values have been suggested.^{1} Using `assess()`

to calculate fit indices, the user should always keep in mind that the value of a fit index is just *some* indication of good or bad fit. Other aspects related to model fit must be considered as well. It is unreasonable to make a binary decision about rejection or non-rejection of a model by soley comparing the value of a fit index with a (more or less) arbitrary cutoff value.

The definitions of fit indices calculated by `assess()`

are given in the following:

- The \(\chi^2\)-
**statistic**is the value of the fitting function times the sample size minus 1. - The \(\chi^2/df\)-ratio is the \(\chi^2\)-statistic divided by its degrees of freedom.
- The
**goodness-of-fit index**(GFI) measures the relative increase in fit of the specified model compared to no model at all. - The
**standardized root mean square residual**(SRMR) is the square root of the mean of squared residual correlations. - The
**root mean square error of approximation**(RMSEA) is the square root of the discrepancy due to approximation per degree of freedom. - The
**normed fit index**(NFI) measures the increase in fit when specifying the model under consideration relative to the fit of a certain baseline model called the “null model”. - The
**non-normed fit index**(NNFI) accounts for the degrees of freedom of the involved models. It is the ratio of the distance between the fit of the baseline model and the fit of the specified model (each per degree of freedom) and the distance beetween the fit of the baseline model and the expected fit of the specified model (each per degree of freedom). - The
**comparative fit index**(CFI) estimates the relative decrease in non-centrality when specifying the model under consideration instead of the baseline model. - The
**incremental fit index**(IFI) is the ratio of the distance between the fit of the baseline model and the fit of the specified model and the distance between the fit of the baseline model and the expected fit of the specified model. Its definition differs only marginally from the definition of the NNFI. - The
**root mean square outer residual covariance**(\(\text{RMS}_{\theta}\)) is defined as the square root of the mean squared covariances of the residuals of the outer model. The calculation of the indicator’s residual covariance matrix involves the calculation of the construct’s covariance matrix. In Lohmöller (1989), this is not stated more precisely. That is why, two alternatives are possible:- the restrictions of the structural model are taken into account basing the calculation on the model-implied construct covariance matrix.
- the restrictions of the structural are not taken into account basing

the calculation on the empirical construct covariance matrix, i.e., the model-implied construct covariance matrix is assumed to be saturated.

It should be stressed again that except for the \(\text{RMS}_{\theta}\), none of the above mentioned fit indices were originally designed for composite models. The indices RMSEA and CFI are non-centrality based and require specific assumptions on model and data typically made in CFA. The same applies for IFI and NNFI since their calculation relies on the properties (primarily the expectation) of the test statistic when data follow a normal distribution. In general, those assumptions are not made in composite models and composite-based estimators, respectively. For this reason, the intuition behind these indices does not hold for composite-based SEM. Nevertheless, calculation of these indices is also possible in this case. Whether the values of these indices are still meaningful in a sense that they can be used for assessment of model fit is an open question. Furthermore, values of fit indices for composite-based estimators and factor-based estimators may not be compared. Users should always keep this aspect and the general limitations of fit indices in mind.

### Formulae

The exact formulae of the fit indices as implemented in **cSEM** are given in the following. The term \(F = F(S, \Sigma(\hat{\theta})) = F(S, \hat{\Sigma})\) stands for the value of a fitting function evaluated at \(S\) (the empirical covariance matrix of the indicators) and \(\hat{\Sigma}\) (the estimated model-implied covariance matrix of the indicators). In the context of composite-based estimators, the distance measures \(d_{G}\) (geodesic distance), \(d_{L}\) (squared Euclidian distance) and \(d_{ML}\) (maximum likelihood distance) serve as fitting functions.

#### The \(\chi^2\)-statistic

The \(\chi^2\)-**statistic** is defined as: \[ \chi^2 = (N-1)\cdot F(S, \hat{\Sigma})\] where \(F(S, \hat{\Sigma})\) is the maximum likelihood distance function \(d_{ML}\) and \(N\) the sample size.

Main reference: Jöreskog (1969)

#### The \(\chi^2/df\)-ratio

The \(\chi^2\)-**statistic** is defined as: \[ \chi^2 = (N-1)\cdot F(S, \hat{\Sigma})/df_M\] where \(F(S, \hat{\Sigma})\) is the maximum likelihood distance function \(d_{ML}\), \(N\) the sample size and \(df_M\) the degrees of the estimated model.

Main reference: Jöreskog (1969)

#### The goodness-of-fit index (GFI)

The GFI is defined as: \[ \text{GFI} = 1 - \frac{\text{trace}\lbrack (S-\hat{\Sigma})^{2} \rbrack }{\text{trace}(S^{2})} = 1 - \frac{\sum_{i,j} (s_{ij} - \hat\sigma_{ij})^2}{\sum_{ij} s_{ij}^2}\] The numerator of the GFI (in the version used in **cSEM**) is the sum of squared differences betwenn each element of \(S\) and its corresponding element in \(\hat\Sigma\) after fitting the specified model. The denominator is the sum of the squared entries of \(S\) and can be interpreted as the total amount of covariances to be explained. Thus, the GFI is a measure of the amount of variance of S explained by the postulated model relative to the total amount of variance to be explained. Other fitting functions could be deployed in the numerator of the GFI. However, in this case, the intuition behind the formula of GFI will not hold any longer.

Main reference: Jöreskog and Sörbom (1982)

#### The standardized root mean square residual (SRMR)

The SRMR is defined as \[ \text{SRMR} = \sqrt{2 \sum_{j=1}^{K} \sum_{i=1}^{j} \frac{ \lbrack (s_{ij} - \hat{\sigma}_{ij})/(s_{ii} s_{jj})^{1/2} \rbrack^{2}}{K (K+1)}} \] where \(K\) stands for the number of indicators, \(s_{ij}\) for the empirical covariance between indicators \(i\) and \(j\), and \(\hat{\sigma}_{ij}\) for the estimated model-implied counterpart. The SRMR describes with which distance the observed correlations are reproduced on average by the model. Therefore, smaller values are associated with a better fit. If data is standardized, \(s_{ii} = s_{jj} = 1\) holds, and the formula reduces to: \[ \text{SRMR} = \sqrt{2 \sum_{j=1}^{K} \sum_{i=1}^{j} \frac{(s_{ij} - \hat{\sigma}_{ij})^2}{K(K+1)}} \]

Main reference: Bentler (2006)

#### The root mean square error of approximation (RMSEA)

The RMSEA is defined as \[ \hat{\epsilon} = \sqrt{\frac{\hat{F}_0}{df_{M}}} \quad \text{where} \quad \hat{F}_{0} = \max \Bigl( 0, F(S, \hat{\Sigma}) - \frac{df_{M}}{N-1} \Bigr) \] In this formula, \(df_{M}\) stands for the degrees of freedom of the specified model (see the Degrees of Freedom section for details on how the degrees of freedom are calculated). The term \(\hat{F}_{0}\) is an estimator for the discrepancy due to approximation. Thus, the RMSEA measures the discrepancy due to approximation per degree of freedom. The intuition of the RMSEA does not apply to composite-based estimators.

Main reference: Browne and Cudeck (1992)

#### The normed and non-normed fit index (NFI and NNFI)

The fit indices NFI and NNFI were among the first fit indices to be introduced (Bentler and Bonett 1980). They are defined as: \[ \text{NFI} = \frac{F_{B} - F_{M}}{F_{B}} \quad \text{and} \quad \text{NNFI} = \frac{F_{B}/df_{B} - F_{M}/df_{M}}{F_{B}/df_{B} - 1/(N-1)} \] The term \(F_{B}\) refers to the value of the fitting function in the null model, \(F_{M}\) to the value of the fitting function in the model under consideration. Thus, the NFI measures the increase in fit relative to the fit of the null model when specifying the model. The intuition of NNFI is that (in factor-based methods) the expectation of \(F_{M}/df_{M}\) is equal to \(1/N-1\). This does not hold for composite-based estimators. It measures the relative departure of the numerator’s term from it’s expectation (in the denominator). That is why, the NNFI is not normed and can take values larger than \(1\).

Main reference: Bentler and Bonett (1980)

#### The comparative fit index (CFI)

The CFI is defined as: \[ \text{CFI} = 1 - \frac{\max(0, (N-1) F_{M}-df_{M})}{\max(0, (N-1) F_{M}-df_{M}, (N-1)F_{B}-df_{B})} \] Like the RMSEA, the CFI is a non-centrality based index. It measures the increase in fit (that is to say the reduction in non-centrality) when specifying the model under consideration relative to the fit of the null model. The CFI is a normed index with a value of \(1\) indicating the best fit. Since it makes use of the assumptions in factor-based methods, its intuition does not apply to composite-based estimators.

Main reference: Bentler (1990).

#### The incremental fit index (IFI)

The IFI is defined as: \[ \text{IFI} = \frac{F_{B} - F_{M}}{F_{B} - df_{M}/(N-1)} \] The rationale underlying the IFI is that the term \(F_{B} - F_{M}\) (in the numerator) is compared with its expectation \(F_{B} - df_{M}/(N-1)\) (in the denominator). This intuition only holds for factor-based estimators.

Main reference: Bollen (1989)

#### The root mean square outer residual covariance

The \(\text{RMS}_{\theta}\) is defined as the square root of the average squared covariances of the measurement model residuals. Since indicators of the same block are allowed to correlate freely in composite models, only the covariances of residuals of different blocks are included in this case. The calculation of \(\text{RMS}_{\theta}\) necessitates the calculation of the correlation matrix of the residuals which is usually labeled \(\Theta\): \[ \Theta = V(X - \hat{X}) = E((X - \hat{X}) \, (X - \hat{X})')\] Since in composite based SEM we always have: \(\hat{X} = \hat\Lambda' \hat W X\), it follows that: \[\hat\Theta = S - S \, \hat W' \, \hat\Lambda - (S \, \hat W' \, \hat\Lambda)' + \hat\Lambda' \, V(\hat W X) \, \hat\Lambda\] The covariance matrix of the constructs (resp. their proxies) \(V(W X)\) can be calculated in two ways. On the one hand, the restrictions of the structural can be incorporated. This is done by setting the argument `.model_implied`

of `assess()`

to `TRUE`

(the default). In this case, the matrix \(V(W X)\) is the model-implied construct covariance matrix. On the other hand (`.model_implied = FALSE`

), the structural restrictions can be neglected. In this case \(V(W X)\) is just the empirical covariance matrix of the constructs, i.e., a saturated structural model is considered. The literature does not comment on how to calculate \(V(W X)\) (see Lohmöller (1989)). Having set all entries of \(\Theta\) that belong to indicators of the same block to `NA`

, the \(\text{RMS}_{\theta}\) is calculated as: \[ RMS_{\theta} = \sqrt{\frac{1}{n} \sum_{j=1}^{K} \sum_{i=1}^{j-1} \theta_{ji}^{2}} \] where \(K\) is the number of indicators, \(\theta_{ji}\) stands for the entry at position \((j,i)\) of the (NA-modified) matrix \(\Theta\) and \(n\) is the number of non-NA entries below the diagonal of \(\Theta\).

### Implementation

The functions are implemented as: `calculateChiSquare()`

, `calculateChiSquareDf()`

, `calculateCFI()`

, `calculateNFI()`

, `calculateNNFI()`

, `calculateIFI()`

, `calculateGFI()`

, `calculateRMSEA()`

, `calculateRMSTheta()`

, `calculateSRMR()`

. They may be called directly using R’s `:::`

mechanism.

### See also

Several fit indices require a fitting function, that is to say a distance measure like the geodesic distance, the squared Euclidian distance or the maximum-likelihood distance. These are implemented as: `calculateDG()`

, `calculateDL()`

, and `calculateDML()`

. They may be called directly using R’s `:::`

mechanism.

## Reliability

### Definition

Reliability is the **consistency of measurement**, i.e., the degree to which a hypothetical repetition of the same measure would yield the same results. As such, reliability is the closeness of a measure to an error free measure. It is not to be confused with validity as a perfectly reliable measure may be invalid.

Practically, reliability must be empirically assessed based on a theoretical framework. The dominant theoretical framework against which to compare empirical reliability results to is the well-known true score framework which provides the foundation for the measurement model described in the Notation help file. Based on the true score framework and using the terminology and notation of the Notation and Termniology help files, reliability of a generic measurement is defined as:

- The amount of proxy true score variance, \(Var(\bar\eta)\), relative to the the proxy or test score variance, \(Var(\hat\eta)\).
- This is identical to the squared correlation between the common factor and its proxy/composite or test score: \(\rho_{\eta, \hat\eta}^2 = Cor(\eta, \hat\eta)^2\).

This “kind” of reliability is commonly referred to as **internal consistency reliability**.

Based on the true score theory three major types of measurement models are distinguished. Each type implies different assumptions which give rise to the formulae written below. The well-established names for the different types of measurement model provide natural naming candidates for their corresponding (internal consistency) reliabilities measure:

**Parallel**– Assumption: \(\eta_{kj} = \eta_j \longrightarrow \lambda_{kj} = \lambda_j\) and \(Var(\varepsilon_{kj}) = Var(\varepsilon_j)\).**Tau-equivalent**– Assumption: \(\eta_{kj} = \eta_j \longrightarrow \lambda_{kj} = \lambda_j\) and \(Var(\varepsilon_{kj}) \neq Var(\varepsilon_{lj})\).**Congeneric**– Assumption: \(\eta_{kj} = \lambda_{kj}\eta_j\) and \(Var(\varepsilon_{kj}) \neq Var(\varepsilon_{lj})\).

In principal the test score \(\hat\eta\) is a weighted linear combinations of the indicators, i.e., a proxy or stand-in for the true score/common factor. Historically, however, the test score is generally assumed to be a simple sum score, i.e., a weighted sum of indicators with all weights assumed to be equal to one. Hence, well-known reliability measures such as Jöreskog’s \(\rho\) or Cronbach’s \(\alpha\) are defined with respect to a test score that indeed represents a simple sum score. Yet, all reliability measures originally developed assuming a sum score may equally well be computed with respect to a composite, i.e., a weighted score with weights not necessarily equal to one.

Apart form the distinction between congeneric (i.e., Jöreskog’s \(\rho\)) and tau-equivalent reliability (i.e., Cronbach’s \(\alpha\)) we therefore distinguish between reliability estimates based on a test score (composite) that uses the weights of the weight approach used to obtain `.object`

and a test score (proxy) based on unit weights. The former is indicated by adding “**weighted**” to the original name.

### Formulae

The most general formula for reliability is the **(weighted) congeneric reliability**:

\[ \rho_{C; \text{weighted}} = \frac{Var(\bar\eta)}{Var(\hat\eta_k)} = \frac{(\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\lambda}})^2}{\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\Sigma}}\boldsymbol{\mathbf{w}}}\] Assuming \(\boldsymbol{\mathbf{w}} = \boldsymbol{\mathbf{\iota}}\), i.e., unit weights, the “classical” formula for congeneric reliability (i.e., Jöreskog’s \(\rho\)), follows: \[ \rho_C = \frac{Var(\bar\eta)}{Var(\hat\eta_k)} = \frac{\left(\sum\lambda_k\right)^2}{\left(\sum\lambda_k\right)^2 + Var(\bar\varepsilon)}\] Using the assumptions imposed by the tau-equivalent measurement model we obtain the **(weighted) tau-equivalent reliability, i.e., (weighted) Cronbach’s alpha)**:

\[ \rho_{T; \text{weighted}} = \frac{\lambda^2(\sum w_k)^2}{\lambda^2(\sum w_k)^2 + \sum w_k^2Var(\varepsilon_k)}
= \frac{\bar\sigma_x(\sum w_k)^2}{\bar\sigma_x[(\sum w_k)^2 - \sum w_k^2] + \sum w_k^2Var(x_k)}\] where we used the fact that if \(\lambda_k = \lambda\) (tau-equivalence), \(\lambda^2\) equals the average covariance between indicators: \[\bar\sigma_x = \frac{1}{K(K-1)}\sum^K_{k=1}\sum^K_{l=1} \sigma_{kl}\] Again, assuming \(w_k = 1\), i.e., unit weights, the “classical” formula for tau-equivalent reliability (Cronbach’s \(\alpha\)) follows: \[ \rho_T = \frac{\lambda^2K^2}{\lambda^2K^2 + \sum Var(\bar\varepsilon_k)}
= \frac{\bar\sigma_xK^2}{\bar\sigma_x[K^2 - K] + K Var(x_k)}\] Using the assumptions imposed by the parallel measurement model we obtain the **parallel reliability**:

\[ \rho_P = \frac{\lambda^2(\sum w_k)^2}{\lambda^2(\sum w_k)^2 + Var(\varepsilon)\sum w_k^2} = \frac{\bar\sigma_x(\sum w_k)^2}{\bar\sigma_x[(\sum w_k)^2 - \sum w_k^2] + Var(x)\sum w_k^2} \]

In **cSEM** indicators are always standardized and weights are chosen such that \(Var(\hat\eta_k) = 1\). This is done by scaling the weight vector \(\boldsymbol{\mathbf{w}}\) by \((\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\Sigma}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\). This simplifies the formulae: \[
\begin{align}
\rho_{C; \text{weighted}} &= (\sum w_k\lambda_k)^2 = (\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\lambda}})^2 \\
\rho_{T; \text{weighted}} = \rho_{P; \text{weighted}} &= \bar\rho_x(\sum w_k)^2 \\
\end{align}
\] where \(\bar\rho_x = \bar\sigma_x\) is the average correlation between indicators. Consequently, parallel and tau-equivalent reliability are always identical in **cSEM**.

So far formulae have been motivated theoretically. Since \(\boldsymbol{\mathbf{\Sigma}}\) is unknown it can be replaced by \(\boldsymbol{\mathbf{S}}\) (the empirical indicator correlation matrix) or \(\hat{\boldsymbol{\mathbf{\Sigma}}}\) (the model-implied indicator correlation matrix), however, \(\boldsymbol{\mathbf{S}}\) and \(\hat{\boldsymbol{\mathbf{\Sigma}}}\) are generally not equal. The practical implication is that if \(\rho_{C}\) is computed as \((\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\lambda}})^2\) using unit weights the weights can in fact be scaled by both \((\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{S}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\) or \((\boldsymbol{\mathbf{w}}'\hat{\boldsymbol{\mathbf{\Sigma}}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\)! Similarly, \(\rho_{C; \text{weighted}}\) can be computed using weights scaled using either \(\boldsymbol{\mathbf{S}}\) or \(\hat{\boldsymbol{\mathbf{\Sigma}}}\). Consequently there are in fact four types of congeneric reliability depending the type of weight and the type of scaling for the weights. Hence, the calculation is of “the” congeneric reliability is always: \[(\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{\lambda}})^2\] where \(\boldsymbol{\mathbf{w}}\) can be:

- a vector of unit weights scaled by \((\boldsymbol{\mathbf{w}}'\hat{\boldsymbol{\mathbf{\Sigma}}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\). This is typically what people refer to as
*the*congeneric reliability (Jöreskog’s \(\rho\)). We label this type of reliability estimate \(\rho_C\). - a vector of unit weights scaled by \((\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{S}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\). This has no known name. Its usefulness is an open question. We label this type of reliability estimate \(\rho_{C;mm}\).
- a vector of weights obtained using a composite-based estimator (e.g. PLS-PM) scaled by \((\boldsymbol{\mathbf{w}}'\boldsymbol{\mathbf{S}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\). This is Dijkstra Henseler’s \(\rho_A\). We label this type of reliability estimate \(\rho_{C;\text{weighted}}\).
- a vector of weights obtained using a composite-based estimator (e.g. PLS-PM) scaled by \((\boldsymbol{\mathbf{w}}'\hat{\boldsymbol{\mathbf{\Sigma}}}\boldsymbol{\mathbf{w}})^{-\frac{1}{2}}\). This has no known name. Its usefulness is an open question. We label this type of reliability estimate \(\rho_{C;\text{weighted};mm}\)

#### A note on the terminology

A vast bulk of literature dating back to seminal work by Spearman (e.g., Spearman (1904)) has been written on the subject of reliability. Inevitably, definitions, formulae, notation and terminology conventions are unsystematic and confusing. This is particularly true for newcomers to structural equation modeling or applied users whose primary concern is to apply the appropriate method to the appropriate case without poring over books and research papers to understand each intricate detail.

In **cSEM** we seek to make working with reliabilities as consistent as possible by relying on a paper by Cho (2016) who proposed uniform formula-generating methods and a systematic naming conventions for all common reliability measures. Naturally, some of the conventional terminonolgy is deeply entrenched within the nomenclatura of a particular filed (e.g., coefficient alpha alias Cronbach’s alpha in pychonometrics) such that a new, albeit consistent, naming scheme seems superfluous at best. However, we belief the merit of a “standardized” naming pattern will eventually be helpful to all users as it helps clarify potential missconceptions thus preventing potential missue, such as the (ab)use of Cronbach alpha as a reliability measure for congernic measurement models.

Apart from these considerations, this package takes a pragmatic stance in a sense that we use consistent naming because it naturally provides a consistent naming scheme for the functions and the systematic formula generating methods because they make code maintenance easier. Eventually, what matters is the formula and more so its correct application. To facilitate the translation between different naming systems and conventions we provide a “translation table” below:

Systematic names | Mathematical | Synonymous terms |
---|---|---|

Parallel reliability | \(\rho_P\) | Spearman-Brown formula, Spearman-Brown prophecy, Standardized alpha, Split-half reliability |

Tau-equivalent reliability | \(\rho_T\) | Cronbach’s alpha, \(\alpha\), Coefficient alpha Guttmans \(\lambda_3\), KR-20 |

Tau-equivalent reliability weighted | \(\rho_{T;\text{weighted}}\) | – |

Congeneric reliability | \(\rho_C\) | Composite reliability, Jöreskog’s \(\rho\), Construct reliability, \(\omega\), reliability coefficient, Dillon-Goldsteins’s \(\rho\) |

Congeneric reliability weighted | \(\rho_{C;\text{weighted}}\) | Dijkstra-Henseler’s \(\rho_A\) |

#### Closed-form confidence interval

Trinchera, Marie, and Marcoulides (2018) proposed a closed-form confidence interval (CI) for the tau-equivalent reliability (Cronbach’s alpha). To compute the CI, set `.closed_form_ci = TRUE`

when calling `assess()`

or invoke `calculateRhoT(..., .closed_form_ci = TRUE)`

directly. The level of the CI can be changed by supplying a single value or a vector of values to `.alpha`

.

### Implementation

The functions are implemented as: `calculateRhoC()`

and `calculateRhoT()`

. They may be called directly using R’s `:::`

mechanism.

## The Goodness of Fit (GoF)

### Definition

Calculate the Goodness of Fit (GoF) proposed by Tenenhaus, Amanto, and Vinzi (2004). Note that, contrary to what the name suggests, the GoF is **not** a measure of (overall) model fit in a \(\chi^2\)-fit test sense. See e.g. Henseler and Sarstedt (2012) for a discussion.

### Formulae

The GoF is defined as:

\[\text{GoF} = \sqrt{\varnothing \text{COM}_k \times \varnothing R^2_{structural}} = \sqrt{\frac{1}{k}\sum^K_{k=1} \lambda^2_k + \frac{1}{M} \sum^M_{m = 1} R^2_{m;structural}} \] where \(COM_k\) is the communality of indicator \(k\), i.e. the variance in the indicator that is explained by its connected latent variable and \(R^2_{m; structural}\) the R squared of the \(m\)’th equation of the structural model.

### Implementation

The function is implemented as: `calculateGoF()`

. It may be called directly using R’s `:::`

mechanism.

## The Heterotrait-Monotrait-Ratio of Correlations (HTMT)

### Definition

The heterotrait-monotrait ratio of correlations (HTMT) was first proposed by

Henseler, Ringle, and Sarstedt (2015) to assess convergent and discriminant validity.

### Formulae

See: Henseler, Ringle, and Sarstedt (2015) on page 121 (equation (6))

### Implementation

The function is implemented as: `calculateHTMT()`

.

# Literature

Bentler, Peter M. 1990. “Comparative Fit Indexes in Structural Models.” *Psychological Bulletin* 107 (2): 238–46.

———. 2006. *EQS 6 Structural Equations Program Manual* (version 6). Encino, CA: Multivariate Software, Inc.

Bentler, Peter M., and Douglas G. Bonett. 1980. “Significance Tests and Goodness of Fit in the Analysis of Covariance Structures.” *Psychological Bulletin* 88 (3): 588–606.

Bollen, Kenneth A. 1989. *Structural Equations with Latent Variables*. Wiley-Interscience.

Browne, Michael W., and Robert Cudeck. 1992. “Alternative Ways of Assessing Model Fit.” *Sociological Methods & Research* 21 (2): 230–58.

Cho, Eunseong. 2016. “Making Reliability Reliable.” *Organizational Research Methods* 19 (4): 651–82. https://doi.org/10.1177/1094428116656239.

Fornell, C., and D. F. Larcker. 1981. “Evaluating Structural Equation Models with Unobservable Variables and Measurement Error.” *Journal of Marketing Research* XVIII: 39–50.

Henseler, Jörg, Christian M. Ringle, and Marko Sarstedt. 2015. “A New Criterion for Assessing Discriminant Validity in Variance-Based Structural Equation Modeling.” *Journal of the Academy of Marketing Science* 43 (1): 115–35. https://doi.org/10.1007/s11747-014-0403-8.

Henseler, Jörg, and Marko Sarstedt. 2012. “Goodness-of-Fit Indices for Partial Least Squares Path Modeling.” *Computational Statistics* 28 (2): 565–80. https://doi.org/10.1007/s00180-012-0317-1.

Hu, Li-tze, and Peter M. Bentler. 1999. “Cutoff Criteria for Fit Indexes in Covariance Structure Analysis: Conventional Criteria Versus New Alternatives.” *Structural Equation Modeling* 6 (1): 1–55.

Jöreskog, Karl G., and Dag Sörbom. 1982. “Recent Developments in Structural Equation Modeling.” *Journal of Marketing Research* 19 (4): 404–16.

Jöreskog, K. G. 1969. “A General Approach to Confirmatory Maximum Likelihood Factor Analysis.” *Psychometrika* 34 (2): 183–202. https://doi.org/10.1007/bf02289343.

Lohmöller, Jan-Bernd. 1989. *Latent Variable Path Modeling with Partial Least Squares*. Physica, Heidelberg.

Marsh, Herbert W., Kit-Tai Hau, and Zhonglin Wen. 2004. “In Search of Golden Rules: Comment on Hypothesis-Testing Approaches to Setting Cutoff Values for Fit Indexes and Dangers in Overgeneralizing Hu and Bentler’s (1999) Findings.” *Structural Equation Modeling: A Multidisciplinary Journal* 11 (3): 320–41. https://doi.org/10.1207/s15328007sem1103_2.

Tenenhaus, Michel, Silvano Amanto, and Vincenzo Esposito Vinzi. 2004. “A Global Goodness-of-Fit Index for PLS Structural Equation Modelling.” In *Proceedings of the XLII SIS Scientific Meeting*, 739–42.

Trinchera, Laura, Nicolas Marie, and George A. Marcoulides. 2018. “A Distribution Free Interval Estimate for Coefficient Alpha.” *Structural Equation Modeling: A Multidisciplinary Journal* 25 (6): 876–87. https://doi.org/10.1080/10705511.2018.1431544.

There are some cutoffs such as e.g., the SRMR should be less than 0.08 or 0.1, however, these values are essentially arbitrary as they have never been formally motivated. Reference is usually done to Hu and Bentler (1999) which based the cut-off on a simulation using factor-based SEM.↩︎