The **brms** package provides an interface to fit Bayesian generalized (non-)linear multivariate multilevel models using Stan, which is a C++ package for performing full Bayesian inference (see http://mc-stan.org/). The formula syntax is very similar to that of the package lme4 to provide a familiar and simple interface for performing regression analyses. A wide range of response distributions are supported, allowing users to fit – among others – linear, robust linear, count data, survival, response times, ordinal, zero-inflated, and even self-defined mixture models all in a multilevel context. Further modeling options include non-linear and smooth terms, auto-correlation structures, censored data, missing value imputation, and quite a few more. In addition, all parameters of the response distribution can be predicted in order to perform distributional regression. Multivariate models (i.e., models with multiple response variables) can be fit, as well. Prior specifications are flexible and explicitly encourage users to apply prior distributions that actually reflect their beliefs. Model fit can easily be assessed and compared with posterior predictive checks, cross-validation, and Bayes factors.

- Introduction to brms (Journal of Statistical Software)
- Advanced multilevel modeling with brms (The R Journal)
- Website (Website of brms with documentation and vignettes)
- Blog posts (List of blog posts about brms)
- Ask a question (Stan Forums on Discourse)
- Open an issue (GitHub issues for bug reports and feature requests)

As a simple example, we use poisson regression to model the seizure counts in epileptic patients to investigate whether the treatment (represented by variable `Trt`

) can reduce the seizure counts and whether the effect of the treatment varies with the (standardized) baseline number of seizures a person had before treatment (variable `zBase`

). As we have multiple observations per person, a group-level intercept is incorporated to account for the resulting dependency in the data.

The results (i.e., posterior samples) can be investigated using

```
summary(fit1)
#> Family: poisson
#> Links: mu = log
#> Formula: count ~ zAge + zBase * Trt + (1 | patient)
#> Data: epilepsy (Number of observations: 236)
#> Samples: 4 chains, each with iter = 2000; warmup = 1000; thin = 1;
#> total post-warmup samples = 4000
#>
#> Group-Level Effects:
#> ~patient (Number of levels: 59)
#> Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
#> sd(Intercept) 0.58 0.07 0.46 0.73 1.01 757 1812
#>
#> Population-Level Effects:
#> Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
#> Intercept 1.77 0.12 1.54 2.01 1.01 719 946
#> zAge 0.10 0.08 -0.07 0.27 1.00 778 1318
#> zBase 0.71 0.12 0.47 0.95 1.01 593 1323
#> Trt1 -0.27 0.17 -0.61 0.05 1.01 756 1270
#> zBase:Trt1 0.05 0.16 -0.26 0.37 1.01 764 1131
#>
#> Samples were drawn using sampling(NUTS). For each parameter, Eff.Sample
#> is a crude measure of effective sample size, and Rhat is the potential
#> scale reduction factor on split chains (at convergence, Rhat = 1).
```

On the top of the output, some general information on the model is given, such as family, formula, number of iterations and chains. Next, group-level effects are displayed seperately for each grouping factor in terms of standard deviations and (in case of more than one group-level effect per grouping factor; not displayed here) correlations between group-level effects. On the bottom of the output, population-level effects (i.e. regression coefficients) are displayed. If incorporated, autocorrelation effects and family specific parameters (e.g. the residual standard deviation ‘sigma’ in normal models) are also given.

In general, every parameter is summarized using the mean (‘Estimate’) and the standard deviation (‘Est.Error’) of the posterior distribution as well as two-sided 95% credible intervals (‘l-95% CI’ and ‘u-95% CI’) based on quantiles. We see that the coefficient of `Trt`

is negative with a zero overlapping 95%-CI. This indicates that, on average, the treatment may reduce seizure counts by some amount but the evidence based on the data and applied model is not very strong and still insufficient by standard decision rules. Further, we find little evidence that the treatment effect varies with the baseline number of seizures.

The last two values (‘Eff.Sample’ and ‘Rhat’) provide information on how well the algorithm could estimate the posterior distribution of this parameter. If ‘Rhat’ is considerably greater than 1, the algorithm has not yet converged and it is necessary to run more iterations and / or set stronger priors.

To visually investigate the chains as well as the posterior distributions, we can use the `plot`

method. If we just want to see results of the regression coefficients of `Trt`

and `zBase`

, we go for

A more detailed investigation can be performed by running `launch_shinystan(fit1)`

. To better understand the relationship of the predictors with the response, I recommend the `conditional_effects`

method:

This method uses some prediction functionality behind the scenes, which can also be called directly. Suppose that we want to predict responses (i.e. seizure counts) of a person in the treatment group (`Trt = 1`

) and in the control group (`Trt = 0`

) with average age and average number of previous seizures. Than we can use

```
newdata <- data.frame(Trt = c(0, 1), zAge = 0, zBase = 0)
predict(fit1, newdata = newdata, re_formula = NA)
#> Estimate Est.Error Q2.5 Q97.5
#> [1,] 5.92175 2.487403 2 11
#> [2,] 4.57475 2.168084 1 9
```

We need to set `re_formula = NA`

in order not to condition of the group-level effects. While the `predict`

method returns predictions of the responses, the `fitted`

method returns predictions of the regression line.

```
fitted(fit1, newdata = newdata, re_formula = NA)
#> Estimate Est.Error Q2.5 Q97.5
#> [1,] 5.932893 0.6985409 4.663774 7.447649
#> [2,] 4.545819 0.5293890 3.574081 5.647261
```

Both methods return the same estimate (up to random error), while the latter has smaller variance, because the uncertainty in the regression line is smaller than the uncertainty in each response. If we want to predict values of the original data, we can just leave the `newdata`

argument empty.

Suppose, we want to investigate whether there is overdispersion in the model, that is residual variation not accounted for by the response distribution. For this purpose, we include a second group-level intercept that captures possible overdispersion.

```
fit2 <- brm(count ~ zAge + zBase * Trt + (1|patient) + (1|obs),
data = epilepsy, family = poisson())
```

We can then go ahead and compare both models via approximate leave-one-out (LOO) cross-validation.

```
loo(fit1, fit2)
#> Output of model 'fit1':
#>
#> Computed from 4000 by 236 log-likelihood matrix
#>
#> Estimate SE
#> elpd_loo -672.1 36.5
#> p_loo 94.5 14.2
#> looic 1344.2 73.1
#> ------
#> Monte Carlo SE of elpd_loo is NA.
#>
#> Pareto k diagnostic values:
#> Count Pct. Min. n_eff
#> (-Inf, 0.5] (good) 209 88.6% 368
#> (0.5, 0.7] (ok) 19 8.1% 128
#> (0.7, 1] (bad) 6 2.5% 35
#> (1, Inf) (very bad) 2 0.8% 5
#> See help('pareto-k-diagnostic') for details.
#>
#> Output of model 'fit2':
#>
#> Computed from 4000 by 236 log-likelihood matrix
#>
#> Estimate SE
#> elpd_loo -594.9 13.8
#> p_loo 107.5 6.9
#> looic 1189.8 27.5
#> ------
#> Monte Carlo SE of elpd_loo is NA.
#>
#> Pareto k diagnostic values:
#> Count Pct. Min. n_eff
#> (-Inf, 0.5] (good) 84 35.6% 675
#> (0.5, 0.7] (ok) 100 42.4% 209
#> (0.7, 1] (bad) 45 19.1% 42
#> (1, Inf) (very bad) 7 3.0% 11
#> See help('pareto-k-diagnostic') for details.
#>
#> Model comparisons:
#> elpd_diff se_diff
#> fit2 0.0 0.0
#> fit1 -77.2 27.1
```

The `loo`

output when comparing models is a little verbose. We first see the individual LOO summaries of the two models and then the comparison between them. Since higher `elpd`

(i.e., expected log posterior density) values indicate better fit, we see that the model accounting for overdispersion (i.e., `fit2`

) fits substantially better. However, we also see in the individual LOO outputs that there are several problematic observations for which the approximations may have not have been very accurate. To deal with this appropriately, we need to fall back to other methods such as `reloo`

or `kfold`

but this requires the model to be refit several times which takes too long for the purpose of a quick example. The post-processing methods we have shown above are just the tip of the iceberg. For a full list of methods to apply on fitted model objects, type `methods(class = "brmsfit")`

.

Developing and maintaining open source software is an important yet often underappreciated contribution to scientific progress. Thus, whenever you are using open source software (or software in general), please make sure to cite it appropriately so that developers get credit for their work.

When using brms, please cite one or more of the following publications:

- Bürkner P. C. (2017). brms: An R Package for Bayesian Multilevel Models using Stan.
*Journal of Statistical Software*. 80(1), 1-28. doi.org/10.18637/jss.v080.i01 - Bürkner P. C. (2018). Advanced Bayesian Multilevel Modeling with the R Package brms.
*The R Journal*. 10(1), 395-411. doi.org/10.32614/RJ-2018-017

As brms is a high-level interface to Stan, please additionally cite Stan:

- Carpenter B., Gelman A., Hoffman M. D., Lee D., Goodrich B., Betancourt M., Brubaker M., Guo J., Li P., and Riddell A. (2017). Stan: A probabilistic programming language.
*Journal of Statistical Software*. 76(1). 10.18637/jss.v076.i01

Further, brms relies on several other R packages and, of course, on R itself. To find out how to cite R and its packages, use the `citation`

function. There are some features of brms which specifically rely on certain packages. The **rstan** package together with **Rcpp** makes Stan conveniently accessible in R. Visualizations and posterior-predictive checks are based on **bayesplot** and **ggplot2**. Approximate leave-one-out cross-validation using `loo`

and related methods is done via the **loo** package. Marginal likelihood based methods such as `bayes_factor`

are realized by means of the **bridgesampling** package. Splines specified via the `s`

and `t2`

functions rely on **mgcv**. If you use some of these features, please also consider citing the related packages.

To install the latest release version from CRAN use

The current developmental version can be downloaded from github via

```
if (!requireNamespace("remotes")) {
install.packages("remotes")
}
remotes::install_github("paul-buerkner/brms")
```

Because brms is based on Stan, a C++ compiler is required. The program Rtools (available on https://cran.r-project.org/bin/windows/Rtools/) comes with a C++ compiler for Windows. On Mac, you should install Xcode. For further instructions on how to get the compilers running, see the prerequisites section on https://github.com/stan-dev/rstan/wiki/RStan-Getting-Started.

Detailed instructions and case studies are given in the package’s extensive vignettes. See `vignette(package = "brms")`

for an overview. For documentation on formula syntax, families, and prior distributions see `help("brm")`

.

Questions can be asked on the Stan forums on Discourse. To propose a new feature or report a bug, please open an issue on GitHub.

If you have already fitted a model, just apply the `stancode`

method on the fitted model object. If you just want to generate the Stan code without any model fitting, use the `make_stancode`

function.

When you fit your model for the first time with brms, there is currently no way to avoid compilation. However, if you have already fitted your model and want to run it again, for instance with more samples, you can do this without recompilation by using the `update`

method. For more details see `help("update.brmsfit")`

.

The rstanarm package is similar to brms in that it also allows to fit regression models using Stan for the backend estimation. Contrary to brms, rstanarm comes with precompiled code to save the compilation time (and the need for a C++ compiler) when fitting a model. However, as brms generates its Stan code on the fly, it offers much more flexibility in model specification than rstanarm. Also, multilevel models are currently fitted a bit more efficiently in brms. For detailed comparisons of brms with other common R packages implementing multilevel models, see `vignette("brms_multilevel")`

and `vignette("brms_overview")`

.