LWF-BROOK90 (Hammel and Kennel 2001) is a soil vegetation atmosphere transport (SVAT) model to calculate daily evaporation (transpiration, interception, and soil evaporation) and soil water fluxes, along with soil water contents and soil water tension of a soil profile covered with vegetation. It is an upgraded version of the original BROOK90 model (Federer, Vörösmarty, and Fekete 2003; Federer 2002), featuring additional parameterizations of the soil water retention and conductivity functions (Mualem 1976; Genuchten 1980), and the option to take interannual variation of aboveground vegetation characteristics into account.

The package core function `run_LWFB90()`

runs the LWF-Brook90 by:

- creating model input objects from climate driving data, model control options and parameters,
- executing the model code,
- returning the model output.

The model control options thereby let you select different functions for defining aboveground stand dynamics, phenology, and root length density depth distributions. Additionally, a set of pedotransfer functions is provided to derive hydraulic parameters from soil physical properties.

In this vignette, we will use meteorological and soil data from the longterm monitoring beech forest site SLB1 in the Solling mountains, Germany, which are available after loading the package.

To reproduce the examples, load ‘LWFBrook90R’ and the ‘data.table’ package:

```
library(LWFBrook90R)
library(data.table)
```

As a first step, we need to set up the input objects for the central function `runLWFB90()`

. Aside from meteorological and soil data, we need to define the model control options and model parameter objects. The model options contain basic information about the simulation and which sub-models to use (e.g. the start and end dates of the simulation, the precipitation interval, the phenology model, root length density depth distribution function, etc). The model parameter object contains about 100 parameters, of which most are required to run the model, but some only take effect if certain model control options are selected (see section Model control options). Two functions are available that can be used to generate default lists of model options and parameters:

```
<- set_optionsLWFB90()
options_b90 <- set_paramLWFB90() param_b90
```

The created objects can be easily manipulated by reference, or simply by assigning values to the option and parameter names directly in the function calls. To look up the meanings of the various options and parameters see `?set_optionsLWFB90`

and `?set_paramLWFB90`

. The meaning and context of most input parameters (and output variables) can also be looked up in the documentation of the original BROOK90 model version on Tony Federer’s webpages, which is always a recommended source of information when working with any BROOK90 version.

To run LWF-BROOK90 for the Solling beech site, we need to prepare the soil data for the model. The data.frame `slb1_soil`

contains soil physical data of the soil horizons, but not yet the hydraulic parameters that LWF-BROOK90 requires. Fortunately, ‘LWFBrook90R’ comes with a set of pedotransfer functions to derive the Mualem/van Genuchten (MvG) parameters of the soil water retention and hydraulic conductivity functions. Here we use texture tabulated values from Wessolek, Renger & Kaupenjohann (2009) and create a data.frame containing the required MvG-parameters along with the soil physical data:

`<- cbind(slb1_soil, hydpar_wessolek_tab(texture = slb1_soil$texture)) soil `

The next step is to select output variables and their temporal resolution. Sets of output variables in different temporal resolution can be selected in a `[7,5]`

-matrix, and passed as `output`

argument to `run_LWFB90()`

. To create a default selection matrix, use the function `set_outputLWFB90()`

. You can modify the default output selection by flagging groups of variables with `0`

and `1`

. The default selection comprises annual, monthly and daily evapotranspiration (‘Evap’) datasets, and layer by layer daily soil moisture state variables (‘Swat’):

```
<- set_outputLWFB90()
output
output#> Ann Mon Day Pre ITR
#> Budg 0 0 0 0 0
#> Flow 0 0 0 0 0
#> Evap 1 1 1 0 0
#> Abov 0 0 0 0 0
#> Belo 0 0 0 0 0
#> Swat 0 0 1 0 0
#> Misc 0 0 0 0 0
```

Now we are ready to perform a single-run simulation using the function `run_LWFB90()`

:

```
<- run_LWFB90(options_b90 = options_b90,
b90res param_b90 = param_b90,
climate = slb1_meteo,
soil = soil,
output = output)
```

`run_LWFB90()`

thereby derives the daily stand properties (`lai`

, `sai`

, `height`

, `densef`

, `age`

) and root distribution from parameters, and passes climate, vegetation properties and parameters to the Fortran dynamic library. After the simulation has finished, a list containing the selected model output (as specified by the `output`

-argument) is returned, along with the model input (`options_b90`

, `param_b90`

and derived daily vegetation properties `standprop_daily`

):

```
str(b90res, max.level = 1)
#> List of 7
#> $ simulation_duration: 'difftime' num 4.05810403823853
#> ..- attr(*, "units")= chr "secs"
#> $ finishing_time : POSIXct[1:1], format: "2021-10-20 07:45:00"
#> $ model_input :List of 3
#> $ EVAPDAY.ASC :Classes 'data.table' and 'data.frame': 730 obs. of 14 variables:
#> ..- attr(*, ".internal.selfref")=<externalptr>
#> $ EVAPMON.ASC :Classes 'data.table' and 'data.frame': 24 obs. of 12 variables:
#> ..- attr(*, ".internal.selfref")=<externalptr>
#> $ EVAPANN.ASC :Classes 'data.table' and 'data.frame': 2 obs. of 11 variables:
#> ..- attr(*, ".internal.selfref")=<externalptr>
#> $ SWATDAY.ASC :Classes 'data.table' and 'data.frame': 15330 obs. of 10 variables:
#> ..- attr(*, ".internal.selfref")=<externalptr>
```

The list entry `EVAPDAY.ASC`

contains date variables (‘yr’, ‘mo’, ‘da’, ‘doy’), daily actual evaporation fluxes (‘evap’, ‘tran’, ‘irvp’, ‘isvp’, ‘slvp’, ‘snvp’), potential evaporation fluxes (‘pint’, ‘ptran’, ‘pslvp’) and total runoff (‘flow’). For a detailed description of all output variables refer to the help pages (`?run_LWFB90`

).

To plot the data, it is convenient to derive a `Date`

object from the date variables. We use data.table syntax here:

`$EVAPDAY.ASC[, dates := as.Date(paste(yr, mo, da, sep = "-"))] b90res`

Another result set that is returned by default are daily soil moisture state variables. The respective output object in the result list is named ‘SWATDAY.ASC’ and contains the values of the individual layers organized in rows. We want to plot absolute soil water storage (‘swati’) down to a soil depth of 100 cm, so we need to integrate `b90res$SWATDAY.ASC$swati`

over the 15 uppermost soil layers. Again, we use data.table syntax for convenient aggregation:

```
$SWATDAY.ASC[, dates := as.Date(paste(yr, mo, da, sep = "-"))]
b90res<- b90res$SWATDAY.ASC[which(nl <= 15), list(swat100cm = sum(swati)),
swat100cm = dates] by
```

Now we can plot soil water storage along with transpiration:

Aside from the basic technical information of the simulation (`startdate`

, `enddate`

, `fornetrad`

, `prec_interval`

and `correct_prec`

), the model control options control the annual course of leaf area index (`lai_method`

), the phenology models to use (`budburst_method`

, `leaffall_method`

), the input and interpolations of annual stand properties (`standprop_input`

, `standprop_interp`

, `use_growthperiod`

) and which root density depth distribution function to use (`root_method`

). The interplay of options and parameters is shown briefly in the following paragraphs, by describing how options and parameters are passed from the `options_b90`

and `param_b90`

arguments to the individual functions that are called from within `run_LWFB90()`

.

In the simulation above, we used the default parameter set (created with `set_paramLWFB90()`

) representing a deciduous forest stand, without leafs in winter and maximum leaf area index in summer. The maximum leaf area index is defined by the parameter `param_b90$maxlai`

, the minimum value in winter is internally calculated as a fraction (`param_b90$winlaifrac`

) of `param_b90$maxlai`

. The basic shape of the intra-annual leaf area index dynamics can be selected by the option `options_b90$lai_method`

. The default setting `'b90'`

makes use of the parameters `budburstdoy`

, `leaffalldoy`

, `emergedur`

and `leaffalldur`

, that define the dates of budburst and leaffall, and the durations of leaf unfolding and leaf shedding until `maxlai`

, and respectively `winlaifrac`

in winter are reached. Within `run_LWFB90()`

, the parameters are passed to `make_seasLAI()`

that constructs the daily timeseries of leaf area index development for a single year:

```
<- make_seasLAI(method = options_b90$lai_method,
LAI_b90 year = 2003,
maxlai = param_b90$maxlai,
winlaifrac = param_b90$winlaifrac,
budburst_doy = param_b90$budburstdoy,
leaffall_doy = param_b90$leaffalldoy,
emerge_dur = param_b90$emergedur,
leaffall_dur = param_b90$leaffalldur)
```

`make_seasLAI()`

also provides other shape functions that require additional parameters. For example, the option `lai_method = 'linear'`

uses value pairs of day-of-year and leaf area index as fraction of `maxlai`

passed from parameters `param_b90$lai_doy`

and `param_b90$lai_frac`

. The doy/value-pairs are then used to interpolate the intra-annual course of leaf area index to a daily time series.

```
$lai_method <- "linear"
options_b90$lai_doy <- c(1,110,117,135,175,220,250,290,365)
param_b90$lai_frac <- c(0.1,0.1,0.5,0.7,1.2,1.2,1.0,0.1,0.1)
param_b90<- make_seasLAI(method = options_b90$lai_method,
LAI_linear year = 2003,
maxlai = param_b90$maxlai,
lai_doy = param_b90$lai_doy ,
lai_frac = param_b90$lai_frac)
```

A third shape-option for the intra-annual variation of leaf area index is called ‘Coupmodel’ and uses the interpolation method as implemented in the ‘Coupmodel’ (Jansson and Karlberg 2004). With `lai_method ='Coupmodel`

, form parameters for leaf unfolding and leaf fall (`shp_budburst`

, `shp_leaffall`

), and the date when leaf area is at its maximum (`shp_optdoy`

) come into action.

```
$lai_method <- "Coupmodel"
options_b90$shp_budburst <- 0.5
param_b90$shp_leaffall <- 5
param_b90$shp_optdoy <- 180
param_b90<- make_seasLAI(method = options_b90$lai_method,
LAI_coupmodel year = 2003,
maxlai = param_b90$maxlai,
budburst_doy = param_b90$budburstdoy,
leaffall_doy = param_b90$leaffalldoy,
shp_budburst = param_b90$shp_budburst,
shp_leaffall = param_b90$shp_leaffall,
shp_optdoy = param_b90$shp_optdoy)
```

A plot of all three methods shows the roles of the different parameters:

By passing a single value via `param_b90$maxlai`

we used the same maximum leaf area index for each year of the simulation period. In order to incorporate between-year variation of the leaf area index, we can simply assign vectors of values for each year of the simulation period to any of the parameters used by function `make_seasLAI()`

. In the following example, we pass three values for `maxlai`

and `shp_optdoy`

, to get different seasonal courses of leaf area index for the three years of the simulation period. Additionally, we add variation to the dates of budburst, by assigning a vector of values to the parameter `budburstdoy`

.

```
<- 2001:2003
years $maxlai <- c(4,6,5)
param_b90$shp_optdoy <- c(210,180,240)
param_b90$shp_budburst <- c(3,1,0.3)
param_b90$budburstdoy <- c(100,135,121)
param_b90<- make_seasLAI(method = options_b90$lai_method,
lai_variation year = years,
maxlai = param_b90$maxlai,
budburst_doy = param_b90$budburstdoy,
leaffall_doy = param_b90$leaffalldoy,
shp_budburst = param_b90$shp_budburst,
shp_leaffall = param_b90$shp_leaffall,
shp_optdoy = param_b90$shp_optdoy)
```

Beside the obvious between-year variation of maximum leaf area index, we can also see the effect of the shape parameter for the leaf unfolding phase `shp_budburst`

. Values greater 1 result in concave, values below 1 in convex functions, while values of 1 give linear progressions. The budburst day-of-year is varying as specified in the parameters, but can also be estimated using temperature based phenology models. By selecting other settings than the default `options_b90$budburst_method = 'fixed'`

and `options_b90$leaffall_method = 'fixed'`

, the `vegperiod()`

function of the ‘vegperiod’-Package is called from within `run_LWFB90`

. `budburstdoy`

and/or `leaffalldoy`

are then calculated for each year from the climate data using the desired methods. See `vegperiod`

for a list of available models. The estimated values for `budburstdoy`

and/or `leaffalldoy`

can be found in the `param_b90`

list element of the results object after the simulation.

`height`

, `sai`

, `densef`

)Like the leaf area index parameters and budburst/leaffall-dates, it is also possible to provide vectors of values for stand height, stem area index, and stand density to generate between-year variation of stand characteristics. From the yearly values, daily values are interpolated using the function `approx_standprop()`

. The `approx.method`

- argument of the function defines how to interpolate the yearly values passed by `y`

. Within `run_LWFB90()`

, the option `options_b90$standprop_interp`

is passed to the `approx.method`

- argument of `approx_standprop`

. The default interpolation method `standprop_interp = 'constant'`

results in a yearly changing step function, while `standprop_interp = 'linear'`

interpolates the values:

```
# constant 'interpolation'
$standprop_interp <- 'constant'
options_b90$height <- c(20.2,20.8,21.3)
param_b90<- 2002:2003
simyears <- approx_standprop(x_yrs=years,
height_c y = param_b90$height,
approx.method = options_b90$standprop_interp)
# linear interpolation
$standprop_interp <- 'linear'
options_b90$height_ini <- 19.1
param_b90<- approx_standprop(x_yrs=years,
height_l y = param_b90$height,
y_ini = param_b90$height_ini,
approx.method = options_b90$standprop_interp)
```

For linear interpolation, additional parameters `height_ini`

, `sai_ini`

, `densef_ini`

have to be provided to `run_LWFB90()`

via the `param_b90`

-argument. These parameters define the values at the beginning of the simulation, to which the value of the first year is interpolated to. By default, the yearly values are interpreted to be valid at December 31st of the respective years, so that the interpolated timeseries are linearly increasing or decreasing during the whole year. In order to constrain the interpolation to the growth period only, the option `options_b90$use_growthperiod`

was introduced, which requires the arguments `startdoy`

and `enddoy`

, when set to `TRUE`

. Then, values decrease or increase between budburst and leaffall only, and remain constant during winter.

```
$use_growthperiod <- TRUE
options_b90<- approx_standprop(x_yrs = years,
height_l_gp y = param_b90$height,
y_ini = param_b90$height_ini,
use_growthperiod = options_b90$use_growthperiod,
startdoy = param_b90$budburstdoy,
enddoy = param_b90$leaffalldoy,
approx.method = options_b90$standprop_interp)
```

The following plot explains the differences between the interpolated timeseries of stand height using the different options and parameters:

Another option for incorporating between-year variation of plant properties is to provide a data.frame with yearly values of `height`

, `maxlai`

, `sai`

, `densef`

and `age`

as parameter `standprop_table`

in `param_b90`

. To take effect, the option `options_b90$standprop_input`

has to be set to `'table'`

. In this case, the values passed via parameters `height`

, `sai`

, `densef`

and `age_ini`

are ignored. As `maxlai`

is also provided via the table, the `maxlai`

value from parameters is ignored as well, while the other parameters that affect intra-annual leaf area development (e.g., `shp_budburst`

) are still active.

For demonstration purposes we use the table `slb1_standprop`

, that contains observed stand data of the Solling Beech Experimental site from 1966 to 2014, along with estimated leaf and stem area index derived using allometric functions. For creating the daily timeseries of stand properties, we use `run_LWFB90()`

, and make use of the option to not run the model (`run = FALSE`

), but only return the model input.

```
#Extend simulation period
$startdate <- as.Date("1980-01-01")
options_b90$enddate <- as.Date("1999-12-31")
options_b90
#set up options for table input
$standprop_input <- 'table'
options_b90$standprop_table <- slb1_standprop
param_b90
# Set up dynamic budburst and leaf fall
$budburst_method <- "Menzel"
options_b90$leaffall_method <- "vonWilpert"
options_b90$budburst_species <- "Fagus sylvatica"
param_b90
#run LWF-Brook90 without simulation
<- run_LWFB90(options_b90 = options_b90,
standprop_daily param_b90 = param_b90,
climate = slb1_meteo,
soil = soil,
output = output,
run = FALSE)$standprop_daily
```

The root depth density depth distribution can either be provided in the column `rootden`

of the `soil`

- argument of `run_LWFB90()`

, or can be derived from parameters using the function `make_rootden()`

. In order to use root density as specified in the soil data, the `root_method`

element of the `options_b90`

-list has to be set to `'soilvar'`

. Other method names are passed to `make_rootden()`

. Currently, the function provides four methods to assign values of relative root density to a vector of soil depths. The default method `'betamodel'`

uses the model of Gale & Grigal (-Gale and Grigal (1987)), which is of the form \(y = 1- \beta^d\), where \(y\) is the cumulative root fraction down to soil depth \(d\) and \(\beta\) is the depth coefficient. Larger values of \(\beta\) correspond to a greater proportion of roots in deeper soil layers:

For larger values of \(\beta\), the root density will reach zero only in very deep soil layers. In order to set the root density to zero at any desired soil depth, the parameter `maxrootdepth`

was defined. With this parameter, the root density is set to zero in all soil layers that lie deeper than `maxrootdepth`

. Within `run_LWFB90()`

, the function is called in the following way:

```
$maxrootdepth <- -1.4
param_b90$root_method <- "betamodel"
options_b90<- make_rootden(soilnodes = c(max(slb1_soil$upper), slb1_soil$lower),
roots_beta maxrootdepth = param_b90$maxrootdepth,
beta = param_b90$betaroot,
method = options_b90$root_method)
```

A second option to define the root distribution for the soil layers is to provide value pairs of soil depth and root density in a data.frame and assign it to the `rootden_table`

-entry in `param_b90`

. As an example, we set up a hypothetical root density depth distribution:

```
$root_method <- 'table'
options_b90$rootden_table <- data.frame(
param_b90upper = c(0.03,0,-0.02, -0.15, -0.35, -0.5, -0.65,-0.9,-1.1,-1.3),
lower = c(0,-0.02, -0.15, -0.35, -0.5, -0.65,-0.9,-1.1,-1.3,-1.6),
rootden = c(10,15, 35, 15, 7.5, 4, 12, 2, 2, 0))
<- make_rootden(soilnodes = c(max(slb1_soil$upper), slb1_soil$lower),
roots_table method = options_b90$root_method,
rootdat = param_b90$rootden_table)
```

A third option generates a linear root density depth distribution, with the maximum at the uppermost soil layer and a root density of 0 at `maxrootdepth`

. If the parameter `relrootden`

is provided, the first element of the vector is used as the maximum, otherwise the interpolation is made between 0 and 1. The last option returns a uniform root distribution, with the first vector-element of `relrootden`

(if provided) as value for all layers down to `maxrootdepth`

.

```
$root_method <- 'linear'
options_b90<- make_rootden(soilnodes = c(max(slb1_soil$upper), slb1_soil$lower),
roots_linear maxrootdepth = param_b90$maxrootdepth,
method = options_b90$root_method)
$root_method <- 'const'
options_b90<- make_rootden(soilnodes = c(max(slb1_soil$upper), slb1_soil$lower),
roots_constant maxrootdepth = param_b90$maxrootdepth,
method = options_b90$root_method)
```

Federer, C. A. 2002. “BROOK 90: A Simulation Model for Evaporation, Soil Water, and Streamflow.” http://www.ecoshift.net/brook/brook90.htm.

Federer, C. A., C. Vörösmarty, and B. Fekete. 2003. “Sensitivity of Annual Evaporation to Soil and Root Properties in Two Models of Contrasting Complexity.” *J. Hydrometeor* 4 (6): 1276–90.

Gale, M. R., and D. F. Grigal. 1987. “Vertical Root Distributions of Northern Tree Species in Relation to Successional Status.” *Canadian Journal of Forest Research* 17 (8): 829–34.

Genuchten, T. van. 1980. “A Closed-Form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils.” *Soil Science Society of America Journal* 44 (5): 892–98.

Hammel, Klaus, and Martin Kennel. 2001. *Charakterisierung Und Analyse Der Wasserverfügbarkeit Und Des Wasserhaushalts von Waldstandorten in Bayern Mit Dem Simulationsmodell BROOK90*. Vol. 185. Forstliche Forschungsberichte München.

Jansson, P.-E., and L. Karlberg. 2004. “Coupled Heat and Mass Transfer Model for Soil-Plant-Atmosphere Systems.” Stockholm: Royal Institute of Technolgy, Dept of Civil; Environmental Engineering Stockholm.

Mualem, Y. 1976. “A New Model for Predicting the Hydraulic Conductivity of Unsaturated Porous Media.” *Water Resource Research* 12: 513–22.

Wessolek, Gerd, Martin Kaupenjohann, and Manfred Renger. 2009. *Bodenphysikalische Kennwerte Und Berechnungsverfahren Für Die Praxis*. Bodenökologie Und Bodengenese 40. Berlin: Inst. für Ökologie, Fachgebiet Bodenkunde, Standortkunde und Bodenschutz.